Matt staring at the box 📦 the whole time it was being opened killed me 😂 and then folding instantly like a lawn chair.

@IndestructibleMFG

2 ай бұрын

Hahaha. Couldn’t say no

Wow! Matt is about to have the sickest ST on KZread! So cool to see someone go all the way with an El Diablo. Can't wait to see the finished bike.

@IndestructibleMFG

2 ай бұрын

Cheers man! We will be sure to do a bike check when it’s complete!

You weren't kidding, wait till next week you said, that's going to be a beast , good luck , can't wait to see the final outcome.

@IndestructibleMFG

2 ай бұрын

Now just wait til we get this in the dyno and you see the numbers!!

You trying to ride that bike on the streets or the track! lol man that thing is gonna be a BEAST!

@IndestructibleMFG

2 ай бұрын

Haha why not both! Would love to have it in the track one day

Awesome 👊

@IndestructibleMFG

2 ай бұрын

Thanks frank!

Will look good with the fluid mounted lower Those open threads can easily be blocked with a black bolt or some rubber caps like the ones where the passenger pegs go in👌

@IndestructibleMFG

2 ай бұрын

Yeah can’t wait to see it all mounted!

Just get a complete clutch at this point and that star racing compensator if failure happens it will cost you greatly depending on how you ride start saving up for a baker grudge box and eventually a flywheel 😅

@IndestructibleMFG

2 ай бұрын

Already went this far so why not right haha

Bro… I love these vids man. I’m hooked! Got my ST and love the inspo and vibe you guys give 🤙🏽🔥

@IndestructibleMFG

2 ай бұрын

Thanks for following along! It’ll be on the road soon

@SterShady

2 ай бұрын

@@IndestructibleMFG hyped! Also pumped to run into you guys one day. Ride safe! Keep posting 🤙🏽

@IndestructibleMFG

2 ай бұрын

For sure homie!

Hell yeah.

@IndestructibleMFG

2 ай бұрын

Let’s go 🤝

Niceeeeee grtz from the Netherlands

@IndestructibleMFG

2 ай бұрын

Thanks for tuning in 🤝

Your bike is going to run out of this world! Hopefully they will have it all done before riding season is over?

@IndestructibleMFG

2 ай бұрын

It’ll be on the dyno next week!

You are deep the Rabbit Hole… gonna be Badass!!

@IndestructibleMFG

2 ай бұрын

Haha very deep. Now it’s time to ride it..

Check out twisted t industries mirror clamp for brembo

@IndestructibleMFG

2 ай бұрын

Looked into that. Still think this custom piece is cooler, fills a gap on the bars and it’s one of a kind

Matt, if you can get the Evolution Industries Complete Clutch Basket Assembly! I’m running a Rekluse setup it’s fine but overall the evolution is much better product!

@IndestructibleMFG

2 ай бұрын

Interesting- I think dan at champion ordered the rekluse one but will check those out

@fxlrsaz6363

2 ай бұрын

@IndestructibleMFG Let Dan, know I’m running a stroker motor built by MHP, and runs smooth at 100MHP no issues in the Arizona heat!! Matt, we are at the same pace with misc parts it’s going to be a super sick wish I, was able to see it in person hopefully one year you come down for Arizona Bike Week 🤘🏽🤘🏽⚡️⚡️🤘🏽🤘🏽

It’s stiff not hard! It’s stiff ! 😂😂

@IndestructibleMFG

2 ай бұрын

Hahaha

Such a cool bike bro… damn the placement on the reservoir is going to look sick asf…

@IndestructibleMFG

2 ай бұрын

Can’t wait to see it done!!

@vicslick122000

2 ай бұрын

I feel like it’s my bike that they’re working on. I’m so invested into watching you guys build that bike lol

@IndestructibleMFG

2 ай бұрын

Hahah that’s awesome.

KLEEN MOTO MAKES A CLEANER LOOKING MOUNT THE. THAT ONE FOR MIRROR ALOT SLEAKER AND OEM LOOKING COMPARED TO THE ONE HE MADE YOU ST LOOKS KILLER 🥵

@IndestructibleMFG

2 ай бұрын

Thanks will check them out. Once this is powder coated I think it’ll look great. Especially cos it was made to fit the FXR division bars perfectly and fills the gap.

Dreams really do come true ... 🤑

@IndestructibleMFG

2 ай бұрын

Haha dreams are expensive

Omg Matt lol $$$$ Too funny, good for you!

@IndestructibleMFG

2 ай бұрын

Gotta do it

This guy loves you guys cause number apparently aint a issue rolling and he took you over so you would by that stuff that fell through haha He’s a smart businessman 👨‍💼 he knew he was gonna get you guys haha😂

@IndestructibleMFG

2 ай бұрын

Haha he knows what buttons to push let’s just say that

i did not know that Louis from the show suits has his own bike shop lol

@IndestructibleMFG

2 ай бұрын

Haha. They filmed that show here

Get a cooling fan

@IndestructibleMFG

2 ай бұрын

Good idea

I wanna put some WHITEWALLS on my FXLRST FAST JOHNNIE!

@IndestructibleMFG

2 ай бұрын

Do it up !

@FREEDOMGUNNER

2 ай бұрын

I AM. But not to your level. You're insane and love watching you guys! I got the Blue and White Saddlemen Explorer LS seat and the Fast Johnnie Chopped Tour Pak. Gonna be bitchin!

Should consider a smaller cam will snap harder with early torque and fun on the street with the heads Yeah the biggest cam will pull big hp on the dyno but how often are you gonna be redlining..you will smoke them off the lights with the smaller cam And absolutely with the effort youve gone too i would put a billet compensator Drop the clutch enough times the stock can shadder and thats not fun Cheap insurance if you like to tear it up

@IndestructibleMFG

2 ай бұрын

Went with 592. It’s not the biggest cam but it’s there. Currently have a smaller cam in there with the 128 kit but it’s definitely mild.

@lukepaso1993

2 ай бұрын

Awesome bro cant wait to see how it turns out gonna be crazy 🔥

Just to let you know, I saw a stage 4 with 5.5 injectors stage 4 heads brand new 64 mm throttle body all for $1500.00 brand new and they were on Facebook marketplace for a while. The first generation heads had issues. Wonder what he is charging you;(

@IndestructibleMFG

2 ай бұрын

Oh yeah? He gave us a great deal

What bars are those?

@IndestructibleMFG

2 ай бұрын

FXR division

Hahahaha ahhhh f……me we’re gonna do it we’re doing it yea we’re doing it we’re doing it we have too HAHAHAHA

@IndestructibleMFG

2 ай бұрын

Matt’s hopeless against motorcycle parts powers

Why don't you get the GOLD OBERON CLUTCH & BRAKE LEVERS? I literally ordered them directly from Oberon's website in the U.K. and it arrived at my house 4 days later in WA state! Same price as buying it from a U.S. Distributor but you don't have to wait 4-6 weeks! By from them directly for $240 total cost!

@IndestructibleMFG

2 ай бұрын

Hadn’t seen those until now. They look great

@FREEDOMGUNNER

2 ай бұрын

Superb Quality!

@FREEDOMGUNNER

2 ай бұрын

You can get the GOLD levers with the RED settings Dial, or ViceVersa. I have the Fast Johnnie Low Rider ST and the Blue Levers are identical in color to the bike paint color😊

@fxlrsaz6363

2 ай бұрын

@@FREEDOMGUNNERI was running the Oberon setup with rekluse clutch had a lot of issues finding neutral, cruise control and had the clutch adjusted two times and finally removed and went back to stock levers no issues!!

Have you crossed over the $100k mark yet for total cost of the bike, upgrades included?

@hybridEP3

2 ай бұрын

Unlikely

@IndestructibleMFG

2 ай бұрын

It’s better not to think about those things haha

@FREEDOMGUNNER

2 ай бұрын

​@IndestructibleMFG Yep, just do it and make some money!

What’s going on may 17th in Montreal I might be in town with my choppers 😧

@IndestructibleMFG

2 ай бұрын

Roll the bones that weekend. We will be there!

Look like the blond guy is the little dog of the owner the El Diablo

@Mugies3850

2 ай бұрын

😂

@IndestructibleMFG

2 ай бұрын

Who’s blonde in this video?

@pathebert31

2 ай бұрын

@@IndestructibleMFG the guy with glasses. BTW love your clothes but your your stuff on youtube is awful.

@IndestructibleMFG

2 ай бұрын

Can’t please em all

Rad.....

@IndestructibleMFG

2 ай бұрын

Thanks 🤝

Stage 4 and you still get showed up by a squid on a20 year old 600 sport bike. Get your excuses ready!

@IndestructibleMFG

2 ай бұрын

🤷