Harley Belt Tension & Wheel Alignment
Автокөліктер мен көлік құралдары
How to adjust your belts tension and alignment. This is a part of a video series I did with Lowbrow Customs. You can check them out at www.lowbrowcustoms.com
Patreon / knoblemoto , check out what I offer.
I have shirts for sale on my website www.knoblemoto.com/shop
I also have tons of info on my blog, on my website.
I do in person classes at Skidmark Garage in Cleveland Ohio. You can take classes in 101 Motorcycle maintenance, carburetors, motorcycle electrical systems, suspension repair, basics of Mig welding, and specialty tools. In addition, I have an engine building class that S&S Cycle sponsors. They support the grassroots crowd, by sending me two warranty return engines, that people can disassemble, and reassemble, to help them build confidence before tearing into their own engine.
Check out my other playlist.
• DIY How To DIY & How To
• Pimpin out the sporty Sportster Related
• Reels Reels
• Product Reviews Product Reviews
• Rider Education Rider Education
• What A Tool Tutorial Tool Tutorial
/ knoblemoto Dyna FXD build playlist
• Lowrider ST Lowrider ST
And I am on assorted social media platforms:
/ knoblemoto
/ knoble_moto
www.tumblr.com/knoblemoto
/ knoblemoto
Email me at knoblemoto@gmail.com
Пікірлер: 26
I have to say Mr Knoble, you really know your stuff. No arrogant attitude, just pertinent information on HD's. I know UJM's but my LRS is glad I watch your videos. Thank you very much. Really wish you were around the corner.
@KnobleMoto
Ай бұрын
You’re welcome. My whole goal of this channel was to share info, without everything I didn’t like about other people’s video.
Thanks 🤘
@KnobleMoto
8 ай бұрын
You’re welcome
Gotta ask. How did you get that bike on that stand?
@KnobleMoto
Ай бұрын
we use a ramp and move the curtains to the machine shop area. It's not as impressive when you see it in person lol
I just got one of those alignment tools for my dyna for the rear wheel and I just wanted to know, I replaced the wheel bearings and rear tire about 200 miles ago but turns out after getting the alignment tool the rear tire was misaligned the whole time. Any chance to overthink if the bearings are bad now or am I overthinking it and the bearings should be good after only riding it for 200 miles that way.
@joshuaramos9676
3 ай бұрын
Btw this is on a chain setup. I was riding normal because I had replaced the rear tire and bearings at the same time and was taking it easy for the first 200 miles
@KnobleMoto
3 ай бұрын
It’s probably fine. I think you would have to run the belt too tight longer than that.
Great video thanks! If I may ask..... How the hell did you get the bike up on that bench?
@KnobleMoto
Ай бұрын
I use a removable ramp. It is less impressive in person than it is on video.
@gulfflier4700
Ай бұрын
@@KnobleMoto Thank! Keep up the content great job!
@KnobleMoto
Ай бұрын
@@gulfflier4700 you’re welcome
What height and brand bare those bars? They look great
@KnobleMoto
3 ай бұрын
They are 12” and I got them from Lowbrow Customs. Lowbrowcustoms.com
@Will-uu8ed
3 ай бұрын
@@KnobleMoto thanks, and what model is the seat, looks like one of the le peras?
@KnobleMoto
Ай бұрын
That is a one off from Saddleman. They don’t sell it. It’s a long story
👍👍👍👍👍👍
@KnobleMoto
Жыл бұрын
😎😎😎
The only thing wrong about this is you didn't tension down the Adjusters
@KnobleMoto
4 күн бұрын
After I tightened the axle? Whoops 😬 😂
Yo do not put tension with the bike on the ground, never
@KnobleMoto
5 ай бұрын
You have to set it at ride height. If you do it with the rear wheel off the ground, it will be too tight when the suspension compresses. Remember the swingarm and the belt don’t pivot on the same axis.
@josecarlosrodriguezb7167
5 ай бұрын
@@KnobleMoto yes to set, in the tightest point with a rider on it, but at the time to add tension the wheel have to be off the ground
@KnobleMoto
5 ай бұрын
@@josecarlosrodriguezb7167 ah. I see what you are saying. You’re right it’s probably good practice to have the adjusters unloaded. Good point 👍
@josecarlosrodriguezb7167
5 ай бұрын
@@KnobleMoto yes it's better if youdo that way because the wheel and the axle can move free, then align the axle with the tool, tighten the bolt at 81nm, down the bike and ride, greetings from Seville, Spain