omg thank you so much for the awesome video and clever mounting system! and for being so generous to share with us! im going to try to use it for my 10.2 cherokee body! Thank you :)

That's a sweet system, well done mate & thanks for showing us.! 😜 👍

very good idea 👍👍👍 for my d90 ,congratulations for this system😊

Excellent work.!

outstanding!

Great Work! Thanks a lot!!!

Gona print these and give it a try🤞🏽

Thanks for This! 🤓👌👌👌

i just had a friend print your system out for me, it should work just fine, my rear bumper is a bit different but i'll make it work, rear shock mounts next

@thercstudio349

3 жыл бұрын

Great! 👌🏻

nice

Very smart! thaks for share!

thanks a lot

Thanks

Very good ideal bro! May I know where to buy the thing the hold the body?

nice setup. what kind of shock mounting that you use ?

Printed this !!!! Tha ks and wondering what interior you used for your build.

Hi there. Please?? We need the stl files for the shock mounts.. Thanks Buddy..👌👌👌

43rd thumbs up. Outstanding job.

Hi, congrats for your great job!. Can you say which make is your Jeep Comanche hard body? thank you,

@thercstudio349

4 жыл бұрын

Hi Juan, It is the Injora version. Although I have 3d printed an extension to make the truck look like the real Comanche. The wheelbase is the 333mm.

Har du några bilder på hur den ska monteras i bak? Riktigt grymt kit du fått ihop! En polare printade precis ut ett till mig som jag ska testa!

would have the stl of the slanted shock absorber bracket of your

@bugsykepik6140

3 жыл бұрын

same question, what kind of shock mounting that he use

Would you tell me what colour grey paint you used please? It’s very nice and is exactly what I had in mind. Thanks

@thercstudio349

3 жыл бұрын

Hey! Thanks! I used Montana Gold 400ml Stealth 👌🏻

@goesbysteve

3 жыл бұрын

Thank you very much

Nice vid how much would you charge me for this mounting system do not have a 3D printer

Hi. Do u have stl file for it?

Do you have a link for that piece that hold the bumper to you chassis? Grts end Thanks

What the rear bumper u are use do u have link please

Where did you get your shock mounts? I have the same body and I am having trouble locating shock mounts that will allow a clean mount of the body without the frame showing too much

@thercstudio349

3 жыл бұрын

Hi Brad, I have 3d printed them. I couldn't use the original ones as you say

@Wild-Card

3 жыл бұрын

@@thercstudio349 I just finished printing and installing your body mount last night, thank you so much!! Do you have a file for the shock hoops?

Can one be made for a trx4?

Really nice mechanism! I'm just racking my brain when thinking about force needed to attach the clamps..would tpu as a semi-rigid material work if the clamps had more aggressive angle? Tpu remembers it's shape quite well.

@thercstudio349

4 жыл бұрын

You could always try it out. I have never used TPU. But look out with making the bottom part of the clamp to long. It could start rubbing against the tires when turning.

Any running videos with no music just truck sound? Does it rattle at all?

@thercstudio349

2 жыл бұрын

Hi, look at this video. No music 😊kzread.info/dash/bejne/i5qVu8qEkbDXnbw.html

I was wondering if the GRC aftermarket inner fender wells for the scx10 ii XJ will fit this hard body?

@thercstudio349

3 жыл бұрын

Hi Craig, I'm sorry to say that I don't know. I made my own using plastic folders that I cut to the shape I wanted.

@kruemelvanbrodt1687

Жыл бұрын

They fits perfectly

Do you have printed the inner fenders to?

@anderssvemark8302

3 жыл бұрын

Were can i found the files for the inner fenders?

it's the Injora body

@thercstudio349

3 жыл бұрын

Hi Sam, yes that is correct. Although I have printed the middle part so that it looks more like the real truck. So the wheelbase is 333mm.

@SamCyanide

3 жыл бұрын

@@thercstudio349 ah ok I was wondering what you meant by 333mm, because stock is 313. Cool.

Any way of purchasing a set from you? I don't have a 3d printer

@thercstudio349

3 жыл бұрын

Hi Danny, I'm from Sweden. The shipping can get costly. I would joins some 3d group on FB and ask. Usually there lots of people that can help you out 😊👍🏻

i was wondering dose this work on a trx4

@thercstudio349

2 жыл бұрын

I don't think these would. They are specific for the scx10.2. But you can always design something similar but with the correct measurements for the trx4 👍🏻

did you put spacers to? i dont find them on thingiverse

@thercstudio349

4 жыл бұрын

Hello, yes I have spacers but it is because I have added 20mm in the middle of the truck. To get it more scale. But It is not necessary if you don't have added the extra 20mm.

@beardmanchannel1591

4 жыл бұрын

@@thercstudio349 ok i see thank you so just the parts from thingiverse is ok for the build? Did ypu do something to youre back suspension mount to? It doesnt fit without this modification? And you maybe have link or something for that piece if its needed please?

@thercstudio349

4 жыл бұрын

Hi, yes you will need a different rear suspension tower. The original is to high. The ones I have I have 3d printed aswell. I don't have any file online though. Please check you rear bumper if it is like the one I have. The rear part of this file is quite exact for the type of bumper I'm using. I'm not sure if this will fit other types of bumpers. The front is on the other hand not depending on the front bumper.

@beardmanchannel1591

4 жыл бұрын

@@thercstudio349 yes i have the same i think. Can you maybe share the 3d files for suspension mount please?

Tjenare, Säljer du denna,behöver ha till min toyota hardbody till scx10. Tror vi snackat om det på Crawling Mellansverige /Dragan O

@thercstudio349

4 жыл бұрын

Hej Dragan, Den finns att ladda ner på thingiverse om du vill printa själv 😊👍🏻 du tänker på bakfästet? Är osäker på om den skulle passa Toyotan. Men testa kan man alltid göra 👍🏻

@dragge6

4 жыл бұрын

@@thercstudio349 Jasså. Du fick till det jätte bra iaf. Vad är det lagt för sökord på thingsgiver?

@thercstudio349

4 жыл бұрын

@@dragge6 www.thingiverse.com/thing:4237534

what the color of your rc car?

@thercstudio349

4 жыл бұрын

This is the color 👍🏻 www.amazon.com/Montana-Gold-Acrylic-Stealth/dp/B0047D28W4

hi, could you share the link to the front body attachment? I have the same body and the problem with mounting it at the front.

@thercstudio349

4 жыл бұрын

Hi Patryk, I don't have a link at the moment. But I can inform you when I have 👍🏻

@kaskowiec1291

4 жыл бұрын

The RC Studio I would be very happy waiting for this day 😁

@teejholt

4 жыл бұрын

Hey man, this mounting system looks ace!! Would you be able to share your STL on Thingiverse if possible please?? Thank you 😁

@thercstudio349

4 жыл бұрын

@@teejholt Hey! Thanks! I'm working on it 👍🏻

@thercstudio349

4 жыл бұрын

It is uploaded! www.thingiverse.com/thing:4237534

It's called a comanche

@07Silv

2 жыл бұрын

He knows this lol

Just shut up and take my money! Lol fr tho wheres the link? 💸

I wont buy it.can you send link?

@thercstudio349

3 жыл бұрын

You have the link in the video description 😉👍🏻

@rcoverdose6946

3 жыл бұрын

@@thercstudio349 i wont all parts chase,body