Your videos are always great, man! Keep up the good work :D

There's so much travel I'm so proud joe 👍🏼

Just found your channel & subbed. Jeep looks wicked & as a Builder myself it's always farout to see what others are doing, some great content going on!

So many yeti owners have that part as it didnt do much for that kit until now, thanks, cutting mine now!

Great mods and great explanation in your videos. Easy choice to subscribe. Thanks!

Such a beautiful rc!

I like your thought process simple and effective 👍🏼 well done

Your tips are always on point. Stsy safe and have fun always.

Nice mod on a great looking Jeep

thanks man. still waiting on the shock rebuild kit for the diaphragms. I think your "buttery smooth" video caused a back order lol. great job keep em comin

Wicked, can't wait to get mine.

Excellent video! registered! I was looking for a painting idea for a bubble of mine, I really liked yours! Congratulations!

Thanks for the vid I have mine apart working on new links and have been trying to figure out where the rear drive shaft was rubbing ( didn't see it before I took it apart) will be clearancing that before I put it back together

Great upgrade!

That noise homer makes when he thinks about dohnuts is what im making now aaaaaaaawwwwwwyyyy

I love my Axial SCX10 II! Best RC car ever :D

@Adamsracing15

4 жыл бұрын

Wait I’ll you try the 3

I tried several setups, ended up with your setup. Instead of using the Yeti Vanquish part I designed my own 3D printed part, but you get the same effect. What I do,(depending on the terrain) I set it up exactly as you did. But if I want to lower the center gravity of my SCX10.2 Jeep Cherokee I simply relocate the lower shock mounting point. The shock end comes mounted to the axle on its own mounting boss. But, by relocating it to the same mounting point as the lower link, it lowers the overall center of gravity of the chassis. It is a simple 2 minute fix that you can do on the go and quickly change the handling depending on the terrain. From a more trail setup to a crawler setup and back with still the benefit of more flex. Difference in ride hide is around 8mm, and you gain or lose a bit of flex, but still have more flex and better handling than standard. There is a how to blog article on the Axial website: www.axialracing.com/blog_posts/1073926252. Keep up the good work, your videos are very helpfull. You have a really nice looking Jeep Cherokee. Like the Monster theme.

Great work looks great

That is great simple, lighter idea for front wheel wells. Might allow more mud storage, but for overall crap deflection and simplicity for cheap - great

Nice rig. Liked and subscribed.

Dude, I would buy this truck from you! Great work! I subscribed!

great video man

looks good!

Nice build

LOVE the TIRES & WHEELS. Ran same on a Real Truck I owned years ago. Let me know how the tires handle. Thanx

I put rc4wd king shocks 100mm on my scx10 ii and I got 5 3/4 inch with all tires still on ground did not have to modify my skid plate. You lifted yours making it more top heavy

Very nice looking rig! I built a kit scx10 II and I absolutely love it. I'm running Holmes Hobbies brushless sensored electronics on 3s Lipo, and it hauls ass for a crawler. Just a great RC kit!

@JPRC

7 жыл бұрын

holmes hobbies make great stuff

@mattgiles6332

7 жыл бұрын

Wayne Altman. Trailmaster BL Pro 2pole sensored motor 3300kv was $100. Trailmaster BLE esc was $150.

I did the mod to the T. my rear flex's nice I can stick the Duratrax under my rear wheel. my front doesn't sit on the table like yours does. I also noticed my scx10-ii now sits taller than when it was stock.

Nice video. This is a nice mod but I think, doing this will also increase torque twist effect...?

Wow Beautiful jeep 😎

Very nice truck, subed

Dang! Wish my real XJ had that flex 👍

Would this mod work for the clone as well? Great rig you got there... Thanks for sharing...

Nice rig bud, what weight did you used in your shocks.? Thanks

Coolness!

진짜 딱 5년 전에 봤던건데 요즘 차들 훨 잘나오는데도 지금 봐도 이쁜차다

Nice

This truck is the kit version, The RTR version has different driveshaft angles. don't know if the shock mod will work on the RTR, I will try it though...

Very good. What is your suspension?

hey, awsome rig. what size and brand shocks?

nice vid odd ? would yhis consept work on a boom racing d110 as well i ask cuz i got 4 peces that r sorta the same thing u made and idk what there for lol tu

I wanna do some crawling, would this be a good buy? I'm not sure if it has enough flex

What do I search up to add these to my crawler 🙌🙌🙌😍😍😍😍

I think you'll also need open diffs for racing

Hi, can you tell me the length of those shock absorbers. Thank you

Cooooooooool truck dude

@fredelljoni1417

6 жыл бұрын

Ryan Clark nub

Mantap bang .

Hey mi FAMILIA!!!!! are you going to make more vids luv your CONTENT!!!! 😀🤙🇺🇸💯💜♻️

What are those wheeels 😍

@nealedmondson3191

4 жыл бұрын

Stock method 1.9 kit wheels that are painted green

Nostalgic! Do you still drive this vehicle?

Nice Rc car

have you tested crawling?

The biggest problem with your mod is when you install the setup in the front and sharp turn with tire lifted it binds into the shocks!

@smolscale

4 жыл бұрын

Scott Palmer you’re doing it wrong. Bind the receiver not the shocks 🤪🤣

What lower links are those, and this can be done to a rtr version of the scx10ii I'm assuming without having to cut the skid plate up as to the off center geometry am I correct? I'm having issues trying to figure out what links to use to keep the rear long, but it's a rtr it has stock links which look cheap

People are hatin too much. He made this for the purpose of being baja capable. He said it over and over in the video

Amazing build. I have a question thou. What did you use to make the wheel wells?

@JPRC

7 жыл бұрын

They are cut out made out of dollar store black vinyl folders

friend I have a concern ... the model fit well scx10ii new tires Proline XL flat iron? ...

Hello ! What did you wear to make the inner wings?

@JPRC whitch push rods set did you use?

I just purchased an SCX10 II RTR maybe 12 hours ago. Brand new in the box from a hobby store near me. My drive line is shifted to the side unlike yours where it's in the center. Also my shocks are black, not silver. Does the kit come with different parts than the RTR?

Pure genius! what are those parts you cut in half from again?

@JPRC

7 жыл бұрын

you can just google scx10 shock keys on ebay..they have lots of ready made options

@brianport3691

7 жыл бұрын

JPRC Sweet thanks!

what bracket did you use near the shock tower?

Hi, first of all, awesome video! Great Job! My question is, which of those two you prefer --> the SCX10 I or the SCX10 II? Maybe you may tell me some reason. Thank you very much!

@JPRC

7 жыл бұрын

Scx10 II all day my friend. I'll take the scx10II over the scx10 and bomber for getting in the rocks and trail. This rig perform so well on my local rock racing track while other scx10 I were getting stuck in all the places. It is he huge that puts the most smile in my face when I drive. 3 reasons why it is better, small pumpkin, long travel suspension and chassis mounted servo.

@JPRC

7 жыл бұрын

Also crazy steering angle is another reason I like it

Sweet rig. Do you have a video showing the driveline mod? I've only run Vaterra but just got my forst SCX10II with the offset driveline.. looking for pro's and cons...

@JPRC

6 жыл бұрын

Mike Day sorry I don't have a video on the drive line. Personally the offset drive line is the better way to go for crawling as it puts more weight forward.

it appears that mod actually gives you bout a quarter inch lift as well

hey great video!. one question though. I compared the skid plate on my scx10 ii with yours in the video and I noticed the angles on my driveshafts are much different. yours are much more centered. do you have the transmission mirrored or flipped?? I have the rtr so is the difference the two speed transmission??

@JPRC

7 жыл бұрын

+N.L CRAWLER yes the difference is between the rtr and kit version. Rtr has the ax10 gear box with off-center output while the kit version has yeti gear box with center output drive shafts

I dont understand all the people against the flexibility?? I guess iv always thought more flex the better for rock crawling?? That gos for my RC and my full size jeep. To me more flex, heavier oil and a lower center of gravity always takes the win??? Im new to the rc crawling world and still learning though.

i want to buy one. my daily driver is a 1:1 98 xj as built but still driveable as i fell comfortable with. i want one of these for obvious reasons but dont want to buy until my lhs gets one in stock so i can look at it.

@JPRC

8 жыл бұрын

you gona love it.

I did the same mod, but mine keeps rolling over extremely easy. What oil you using

How do i get this much suspension travel

what is the part name so i can order one?

How long are your shocks on there

awesome flex. will this set up work for the scx10 1? if so what shocks and length shocks should i use?

@JPRC

8 жыл бұрын

cbe makes shock keys just for the scx10 I

@johnjohnjohnson

8 жыл бұрын

What shocks are you using?

@JPRC

8 жыл бұрын

+John Johnson those are stock scx10 II shocks

What kind of stock and and size and what kind of springs

Hey JPRC! Who sells those tires? I'm building a SCX10 to replicate my full size Toyota and that has the KO2's on it.....

When scale looks are 💯 but scale realism is thrown out the window

Whoa!!! Please, someone, if they might know. Wbo makes the front and rear inner fenders set. AND will they fit a semi-clone( if that's what it is), an RGT R008? The Jeep Wrangler Rubicon. I have an Injora body on it and hate being able to see all the way through in front.

It work on my redcat gen 7 and my scx10

What shocks do u use on this

Hey! Did you use Yeti Front Shock Adjuster on both front and back? or were there Yeti BACK shock adjusters?

@JPRC

7 жыл бұрын

these are the front ones cut in half

What links are those on that crawler?

still can't get over how amazing it looks.. I need to know where can I find that monster energy decal?

@JPRC

8 жыл бұрын

Link in description

@rauda3070

8 жыл бұрын

+JPRC don't see it..

@JPRC

8 жыл бұрын

+Carlos Smith in the previous video

The shock 90mm?

What brand shocks are those?

So as you can see the diy swaybar was cheap and super effective! I am glad you liked it and I encourage you to do the same on your rig. Let me know how well it worked for you!

@_rzmp420

6 жыл бұрын

What kind of shocks are you using

@Poizdrc

5 жыл бұрын

Not a sway bar....

@mymomsagirlpoopgood

4 жыл бұрын

sway bar????

@tobydyes

3 жыл бұрын

Put the can on the inside of a tire not in the middle

Hi, I'm new to the rc crawling world. Im looking at buying the scx10 deadbolt. Will this mod work on that machine? Would you recommend a different scx10 over the deadbolt?

@JPRC

6 жыл бұрын

+Trent Carter deadbolt is a great first crawler to have. there are already plenty after market parts for doing this. Try searching for “scx10” shocks keys on eBay. It works for both the 10.1 deadbolt and 10.2.

I would like to paint my mirrors and handles too. Can you please tell what kind of colour you have used. Tamiya PS paint doesn't hold. Thanks

@JPRC

6 жыл бұрын

+Harry Schulz to paint on hard plastic you need tamiya TS paint

Would you recommend this is a starter vehicle for crawling

@maagneticc6470

5 жыл бұрын

Jonah Werbelow YES very easy to upgrade

Legendas em português br muito bom

the issue though is it seems the OLDER cherokees are the only ones that had central driveshaft outputs. what was the product number for these older cherokees? trying to find a central output transmission to slap into my f100 scx10 II

@JPRC

3 жыл бұрын

It is not the age but rather the kit version gearbox (hi-lo) that has the center drive shaft. The down size of the gearbox is the motor weight shifted to the rear and it does not actually work as good as offset version that places the motor more to front.

So one cut in half will do front and rear for each side? So I only need to order 2 total not 4 ?

@JPRC

4 жыл бұрын

Nick Lewis or you can now search for “scx10 shock keys” on eBay and or Amazon. They make them now for the exact reason.

Nice Truck but FYI, you dont Gain travel by leaning a shock you Lose travel, stand a pencil ✏ upright , when is the pencil at its highest point? is it when its upright or when its leaning over?....

What are the shocks?

I dont get the people that know it all but are watching these videos just to comment negatively. Weird you know it all... no need to watch his mod then

How to pick up a pair of awesome inside spring shock for Gmade R1?? - can you help give some advices?

@JPRC

7 жыл бұрын

i dont have experience with the Gmade shocks so i can't say too much about them

This should work on the scx10 1 too right? Also is the 10w to light?

@JPRC

7 жыл бұрын

yes 10w is too light. i finally settle back to 20 rear and 30 front.

@Boating113

7 жыл бұрын

Is that what the stock oil is?

On the last shot not all wheels were touching the ground

What did u make your front inner fenders from

@JPRC

6 жыл бұрын

Check out the xtra speed inner fender set for scx10.2 they are cheap and great fit

What size links are those