I have one of these and I love the thing. It's great for exhausts and sheet metal. Probably not recommended but I've even used it to fix a roll cage in a race car. Hey, it did the job!
@alkey7266
7 ай бұрын
What settings you use for sheet metal?
@SW34T
7 ай бұрын
Someone ran over my mailbox post. I'm about to buy 1. & thinking about using it to weld winch to trailer
@zachshiray8998
6 ай бұрын
Flux core gets more penetration than other processes. As long as youre welsing it right it should be fine. Roll cage tubing isnt that thicck
@artvandelay9201
5 ай бұрын
I welded the frame together on my harley davidson chopper with this thing.
@jameyharrison7499
4 ай бұрын
@@artvandelay9201 Flux core wire? Thinking of hardtailing my sportster.
@myrealname20229 ай бұрын
Excellent welder, crummy wire. Welds even better with good wire. I get Hobart in vacuum sealed packs to minimize wire oxidation. Makes for even smoother weld puddles and less spatter.
@Felipe-si1ho
7 ай бұрын
Thanks 👍
@jessewilson307
4 ай бұрын
I went w the harbor freight wire and would DEFFLY like to see how a better wire handles
@chauncey5962
Ай бұрын
Gotta use Lincoln Hobart pretty goo I’d imagine want something with a high deposit rate
@arfreeman112 ай бұрын
Already own it. I use Blue Demon .030 wire and I upgraded the ground clamp. I couldn't be happier with it and the price is great.
@t.l.robinson2162 Жыл бұрын
I own this welder plus 2 other Harbor Freight welders. I wouldn't trade them for any others.
@elicarter1356
Жыл бұрын
Do you have the protig?
@Captain_curiosity_Ws6
3 ай бұрын
Even a Lincoln?
@cecilandrews7479
3 ай бұрын
Well I've used a couple of these. I own a small Lincoln. The titanium is a piece of s*** compared to the Lincoln.
@eddieabernathy59984 ай бұрын
I use this welder for off-road vehicle fabrication short duty cycle but it works good
@derekbryant6137 Жыл бұрын
I have its Big Brother the 140 titanium Mig flux welder which can also do gas and has a few more bells and whistles but so far these inverter wire feeders are OnPoint
@derekbryant6137
10 ай бұрын
@@lunarvvolf9606 I went to HTP America and ordered their 15 series gun that fits the titanium 140 I also picked up all the consumables that go on the end of the gun for that new lead there also much heavier Duty lead
@yamen16 Жыл бұрын
I've owned this for a while and it works great.
@shawnr10011 ай бұрын
Got one last week. Great for small jobs around the house for beginners.
@waltoliver67042 ай бұрын
I bought one about 3 years ago and it works great especially for thinner steel. 😊
@timothysexton6800 Жыл бұрын
I have the 140 model. I love it for wielding anything up to 1/4 inch. It also does really well on thin metals using a stitch wield Lots of flexibility not problems at all I use a lot of Vulcan wire because it is easy to pick up close by, but have found a couple of others in the same price range created smoother beads
@leoNamanda097 ай бұрын
I bought one on sale for 159.99 a couple of years ago and sat on its box for a year and a half. Never welded anything before using a wire feed style but this one is so easy to use for the diy use. I fixed my kids broken trampoline galvanized steel pole and worked like a charm. I recommend this welder for any beginner.
@motordar
7 ай бұрын
That’s what I was wondering, if it would weld a galvanized trailer part
@NinjaKid250 Жыл бұрын
I have had the titanium multiprocess welder for about 4 years, ive used every mode and other than the tig being scratch start, i have 0 complaints about the machine.
@RYTHMICRIOT Жыл бұрын
The most important part of welding is that your metal is clean.
@terrydavis6132
Жыл бұрын
And a really good clean ground close to where you are welding , I've owned one of these for about a year now , built a complete front-end loader for a garden tractor with it , not one minute of trouble with it .
@Bigdickcactusman
Жыл бұрын
I weld Flux core directly on top of rust and mill scale
@Welderman007
Жыл бұрын
The most important part of welding is knowing how to weld.
@Audace140010 ай бұрын
I've been welding 3/16" and 1/4" angle iron, horizontal, vertical and overhead with this little green box and it welds great. Nice thick beads when you need it or dial it back for 1/16. Works great for outdoor projects using Lincoln innershield wire from HD.
@Dabbin916
8 ай бұрын
It’s light to and makes it easy for doing jobs and whatnot better than carrying a bulky heavy ass welder around
@53prime11 ай бұрын
I have one. I love it. Welded a carriage today to use my 12 ton pneumatic bottle jack as a forging press and all of the welds tight on .125 angle iron and some 7 gauge. And that was about those same settings; not even maxed out! Only thing I don't like is that the slag doesn't always fully cover the weld. Not sure if it's a volume issue with the thinner wire or something to do with the inverter technology.
@onmyworkbench7000 Жыл бұрын
I have one of their original 90 amp welders and it does a good job for what I use it for. I like it so much that I bought a 125 amp welder as a backup unit in the event the 90 amp CROAKED. Like Clint Eastwood said in the Dirty Harry movie, Magnum Force "a man has to know his limitations". That is the same with Harbor Freight welders, you have to know their LIMITATIONS, if I was in the market for a new welder I would buy a Harbor Freight Titanium EasyFlux 125 Welder.
@nickmaguire333 Жыл бұрын
I have the Chicago electric 125 from harbor freight, it doesn't have as many options on settings but it works alright. I want to upgrade to the titanium soon.
@mikeadair54754 ай бұрын
Own it and I love it! Very easy to use and get used to!
@retirementhobbyfarmdiyadve1511 Жыл бұрын
I own one. I’ve used it on some small repairs. Works well.
@mattleggett5609 Жыл бұрын
I've had the same one for little over a yr now and have went through about 6 lb wire so far and I've been very impressed with it!! Definitely money well spent when on a budget next im really wanting multi process welder from yeswelder or primeweld!!
@edwardkane3237 Жыл бұрын
I have the Harbor Freight Chicago Electric 240 volt mig welder and I run it with flux cored wire. It has served me well.
@frankbailey9542
Жыл бұрын
It runs so much better with gas I have the same welder get some gas!
@amazingtbone11 ай бұрын
Own it and love it. It’s paid for itself many times.
@jaredolson4305 Жыл бұрын
Go prime weld! Amazing machines and about the same price.
@mccullumje Жыл бұрын
A very good beginner welder.
@alecreents41593 ай бұрын
This little thing is a beast, you can build almost anything as long as you either have a backer bar on or a deep enough bevel, I love it
@JackHenderson-dk8hr Жыл бұрын
I already have one and love it. It is amazing
@Paul-qw6foАй бұрын
These things are super AWESOME!!! Small yet get several jobs done!!!
@UU-dp9th Жыл бұрын
I’ve used it in shop class, it welds good, if you go quick enough with the right speeds it’s really nice for sheet metal
@elicarter1356
Жыл бұрын
People who use flux or dual shield or anything with slag on sheet metal are actually clinically insane. Tig or low volts mig is the only right way
@UU-dp9th
Жыл бұрын
@@elicarter1356 on a budget, you do what works. Not what’s right 😂
@dsf4173
Жыл бұрын
@@UU-dp9thay g hate to be a bother but i got a titanium mig 170 barley gonna try welding no classes nada any advice on what wire feed or any advice
@UU-dp9th
Жыл бұрын
@@dsf4173 in the manual they have a diagram for what wire to use and what voltage/speed you need for the thickness of metal you’re working on.
@elicarter1356
Жыл бұрын
@@Sxvaqe-_- just work hard for my stuff. There’s a difference
@BeanEaterExtraordinaire2 ай бұрын
I saw someone say to set it to A or B and wire speed to 3, am I really that underpowered with those settings on steel?
@barrymarshall35923 ай бұрын
I own it. Now I need to learn how to properly weld with it.
@markmcleod5079
3 ай бұрын
Same here. The more I practice, evaluate the results and make adjustments accordingly, the better the welder seems to get. :)
@megadeuz614811 ай бұрын
I have owned one ever since they came out,just bought a second one today! Just in case my first one craps out.
@Tommy.McLean Жыл бұрын
Own it and love it
@RatherBeRacing Жыл бұрын
I own it love it
@jeffbaker527 Жыл бұрын
I own one and love it works great!!
@wootuser Жыл бұрын
This little Flux MIG is awesome for the price and it works very well. I used Blue Demon for Stainless car exhaust work with lots of prep work. For Standard steel it's been great with the Harbor freight wire. For big thick pieces I still use my STICK welder.
@danhambrick6331 Жыл бұрын
Looks good Jimmy..I would be it.😁💪👍👍
@that_92_mx3 Жыл бұрын
I’ve got it I think it’s pretty good for price. Just gotta get the settings right and it flow’s perfect for me
@jamesfrost526123 күн бұрын
Have one, it does pretty good for what it is. It connects two pieces of metal together and they stay together, thats all that masters
@ultimateormus7903 Жыл бұрын
Looks like it could do small jobs around the shop just fine.
@mikeburke865610 ай бұрын
I have had mine for a couple of years. I'm a DIY welder and use it for small metal projects. It's really handy for the beginner.
@RoninDosho Жыл бұрын
I’d like to see a it longer video rather than a short. That said, I do like the portability of this one yeah I’d probably consider buy that one.
@richardhowe6218 Жыл бұрын
already own one. Love it!!
@prophez23 Жыл бұрын
Got one last spring and it's been great.
@jcnme Жыл бұрын
I own one and I love it 😀 Check to see about Reversing the Polarity and getting better welds and less splatter. 👌👍
@97TRAKIN Жыл бұрын
That's my next welder. I currently have the Northern Industries 125 flux core welder and its "tired". I wish I could find parts for it.
@colepruitt15082 ай бұрын
I’ve got my settings here at f and 1/2
@Jturnb9 ай бұрын
It’s on sale for 147.99 this week!
@rodneybrand8521 Жыл бұрын
I have one ..i had 2 of the chicago before i bought the titanium welder..and you're right it is sick..i use cooking spray to make the beads not stick as bad..don't use the butter flavor it really smells bad ..canola seems best..the two chicago welders i gave away..still in good working condition ..
@TTime685
Жыл бұрын
Is it pretty much equivalent to the Chicago?
@westsidedavie
Жыл бұрын
@@TTime685 better in everyway.smaller,lighter.the settings are far more adjustable.inverter so it runs better
@garydumoulin631810 ай бұрын
I just bought one of these and I was surprised at the strength of the welds it can make. I have been welding for 50 years but I never had a flux core welder so I'm in a sort of a learning phase. So far the welds i've cut and tested have shown a lot more penetration than I would have expected for such a cheap machine . So far so good. I even pushed it up to 1/4 inch stock to see if It would exceed the rated capacity. It did , but the weld was a little weak for my liking.
@NDMale Жыл бұрын
Yes man just got it and learning sbout it how to use it
@triggeringliberals405 Жыл бұрын
I love this machine
@georgeward49376 ай бұрын
As a factory certified welder repair tech for all major brands with over 20 years experience. Reguardless of machine color, they all evevtualy break. Major brands have better warranty support for parts. In most cases warranty does not pay for lost productivity. Most problems with small machine are caused by consumers that either do not read the owners manual or the information in the owners manual is beyond the operators comprehension. These inexpensive machines will be satisfactory as long as they are respected and operated within specs. If YOU purchase a less expensive machine and it breaks and YOU can't repair it, dont bother taking it to a repair shop. Just go back and buy another one!!!!!
@tommyhamel89
4 ай бұрын
Agreed, in general cheap is expensive. The duty cycle is 30% on these, 7 minutes of cooling for 3 minute of CONTINUOUS weld at 90 amp.
@TheMidnightcwby Жыл бұрын
i love mine!
@skyon19888 ай бұрын
Had mine 2 years and love it
@paulsteele8614 Жыл бұрын
It looked like you had some undercut, maybe just a tad bit hot,also never weld galvanized metal,the fumes will poison you, it attacks the nervous system
@robertball3578
Жыл бұрын
For sure, grind off the galvanizing before applying high heat or else use a "supplied air" respirator.
@thehealer913 Жыл бұрын
Yeah, I'd buy one for my home stuff.
@tondaqakin32754 ай бұрын
I just returned 125, no way to setup. Cold And wire did not come Fast enough. I went back to stick welder and it works well.
@shanemckinney67427 ай бұрын
Good little machine love the built in inverter
@hansonprofile Жыл бұрын
Mine's been great so far
@arealmaintenanceandrepairl110311 ай бұрын
Gen 1 last a year gen2 has been modified so far it’s been good to me welded dump trailer ramps
@blueovalfan232 ай бұрын
Had to go to lowes and get the century version. It's pretty much the same thing. Love that litte welder. Just bought the 225 stick. Even on 120, it's twice the weld the little Chicago model is. Cost twice as much to. Now I'm looking at running dedicated power for both out back. DC inverted is the way to go, no doubt.
@dwanjacquet162 Жыл бұрын
I’m thinking about buying one for personal use
@ericjudd3137 Жыл бұрын
Maybe close up looks bigger im.been thinking about getting one that's for the vid
@clearseriously21842 ай бұрын
I have the same one i used mine to repair commercial trailer and everything else that I need a welder for and it works great
@williamalexander1743 Жыл бұрын
What do the letters in the designation mean? Is there a chart that shows the differences in the various letters of the designation?
@Selendryle
8 ай бұрын
there is a chart under the lid (seen 13sec in) that gives a recommended speed and voltage per metal thickness. basically higher number/letter = more speed/power.
@TigandmigRev Жыл бұрын
Love that little machine bought it 3 months ago on sale for 160 with the warranty best 200 dollar I ever spent i also made a little short for it nice video man
@Bubby4myTummy
Жыл бұрын
My girl just send me a coupon from Barbour freight $175
@speculizer197110 ай бұрын
I have the titanium 170 and it’s a fine little machine. Much better than my Lincoln 135 T
@Tapsr5 ай бұрын
I just bought this an I can feed wire with the cold wire feed,but when I push the gun trigger nothing happens at all,any help is appreciated thanks..
@anthonyjones85798 ай бұрын
I have one. Works awesome. Does everything I need to do with it.
@White000CrowАй бұрын
It really is a great welder. I picked one up for $100 a few years ago.
@AaronBelknap4 ай бұрын
I bought one but need practice for sure. I have an old Pullman camper that I’m trying to weld up the gaps in the sides. Not sure if I had settings right! I welded heavier metal and did fine. But I bought some sheet metal to practice on.
@themechanic4222 Жыл бұрын
Your hand are little high and lower your speed wire , use gel on the welding nuzzle ❤
@Social_Brat Жыл бұрын
Can it run on a generator?
@mick57405 ай бұрын
Nice ! Im looking at this one and also a older used one from a friend. I can’t remember the darn name but in thinking its a bigger unit and maybe hood old fashion quality. Is this one plug into 110 or 220 ?
@josephmunoz640 Жыл бұрын
Will it hold up to heavier use based on your time with it?
@bobd.fletcherjr491211 ай бұрын
I have a Harbor Freight titanium 125 and I love it Bob Elkhart👍👍👍👍👍👍👍👍👍👍👍👍👍
@toodjackson44387 ай бұрын
I own one and what I like is that I don't have to get the bigger welder with a extension cord to weld something outside if I can't get it in the shop
@johnpapa8681Ай бұрын
I have one of these. I upgraded the ground clamp, and the gun and cable. The gun is uncomfortable. It's too straight. I put a gun and cable from a Lincoln 140. It welds good.
@LouisFML15 ай бұрын
I have it, and love it!
@JonathanPulgarin-oy3fw9 ай бұрын
The best one. Used all weekend
@nilomyki Жыл бұрын
What brand of Welding Jacket you're wearing?
@user-ji2do4qg4d8 ай бұрын
Love it I use it for 4 wheeler and sxs frames and cages I use it for exhaust I use it for almost everything I do
@2LateIWon9 ай бұрын
This past weekend it was on sale for$149. I was going to buy it but got to busy
@denverscott378 ай бұрын
Just bought one for $145, black Friday deal at harbor freight, I've never welded anything in my life, but that's about to change, I'm going to teach myself to weld with this thing, just to do small fabrication stuff, nothing major, I've always wanted to learn and just caught this thing on sale and had to jump on it.
@Felipe-si1ho
7 ай бұрын
How's it coming along
@christophernayar6543
Ай бұрын
It’s been six months. Now it’s time for you to teach me. I’ve never welded anything before. Make a video on how to set it up from the box and the rationale behind how you select what settings to use and then an example of a first welding practice for me to try
@mxcurtis9783 ай бұрын
I bought one and love it
@LaunceBugbee2 ай бұрын
I just bought it and it’s what I’m learning to weld with…
@phreaktor Жыл бұрын
Can it do 3/16" on a 20A receptacle?
@shonsadler3817Ай бұрын
I've got one of those, and I have had excellent results from it. If you run the smaller diameter wires, you'll get much better results and a smoother weld
@sqbdynton3 ай бұрын
Could you use this welder for a gokart or bike project
@iamonearies21 Жыл бұрын
I'm thinking about buying a welder. I only have a little experience welding and it was with a stick welder. I was working at a temp agency and got sent to a new complex. I was helping a company dig trenches for conductor lines for the sliding gate. I asked if I could try welding on the fence. I weld a line maybe 4 Inches and did ok for a first time weld. Should I buy a stick welder since I have a little experience with it?
@btoreyes19694 ай бұрын
I own this little welder and I think it's great!
@lexustech4821 күн бұрын
Looking for a welder to run off my generator at 110/120v. Sheet metal, welding frame brackets etc. looks like this could be a winner.
@kennethschauer18017 ай бұрын
I have two of these great little welders
@robwinder42822 ай бұрын
Just bought one today….we’ll see!!
@Project_bikes Жыл бұрын
So flux core you don’t need to have the nozzle ?
@davesouders65427 ай бұрын
Just bought I love it
@mehere3013Күн бұрын
how is it on thin automotive metal
@LawrenceBush-oo9mh3 ай бұрын
Have one and it Really cool for a beginner.
@tjonesauto9 ай бұрын
$179 just looked it up. Getting one today, thanks
@TheGoodTheBadTheRowdy Жыл бұрын
Any others that are easy to use like this? My son wants to build a light weight trailer for hos bicycle to haul.
Пікірлер: 235
I have one of these and I love the thing. It's great for exhausts and sheet metal. Probably not recommended but I've even used it to fix a roll cage in a race car. Hey, it did the job!
@alkey7266
7 ай бұрын
What settings you use for sheet metal?
@SW34T
7 ай бұрын
Someone ran over my mailbox post. I'm about to buy 1. & thinking about using it to weld winch to trailer
@zachshiray8998
6 ай бұрын
Flux core gets more penetration than other processes. As long as youre welsing it right it should be fine. Roll cage tubing isnt that thicck
@artvandelay9201
5 ай бұрын
I welded the frame together on my harley davidson chopper with this thing.
@jameyharrison7499
4 ай бұрын
@@artvandelay9201 Flux core wire? Thinking of hardtailing my sportster.
Excellent welder, crummy wire. Welds even better with good wire. I get Hobart in vacuum sealed packs to minimize wire oxidation. Makes for even smoother weld puddles and less spatter.
@Felipe-si1ho
7 ай бұрын
Thanks 👍
@jessewilson307
4 ай бұрын
I went w the harbor freight wire and would DEFFLY like to see how a better wire handles
@chauncey5962
Ай бұрын
Gotta use Lincoln Hobart pretty goo I’d imagine want something with a high deposit rate
Already own it. I use Blue Demon .030 wire and I upgraded the ground clamp. I couldn't be happier with it and the price is great.
I own this welder plus 2 other Harbor Freight welders. I wouldn't trade them for any others.
@elicarter1356
Жыл бұрын
Do you have the protig?
@Captain_curiosity_Ws6
3 ай бұрын
Even a Lincoln?
@cecilandrews7479
3 ай бұрын
Well I've used a couple of these. I own a small Lincoln. The titanium is a piece of s*** compared to the Lincoln.
I use this welder for off-road vehicle fabrication short duty cycle but it works good
I have its Big Brother the 140 titanium Mig flux welder which can also do gas and has a few more bells and whistles but so far these inverter wire feeders are OnPoint
@derekbryant6137
10 ай бұрын
@@lunarvvolf9606 I went to HTP America and ordered their 15 series gun that fits the titanium 140 I also picked up all the consumables that go on the end of the gun for that new lead there also much heavier Duty lead
I've owned this for a while and it works great.
Got one last week. Great for small jobs around the house for beginners.
I bought one about 3 years ago and it works great especially for thinner steel. 😊
I have the 140 model. I love it for wielding anything up to 1/4 inch. It also does really well on thin metals using a stitch wield Lots of flexibility not problems at all I use a lot of Vulcan wire because it is easy to pick up close by, but have found a couple of others in the same price range created smoother beads
I bought one on sale for 159.99 a couple of years ago and sat on its box for a year and a half. Never welded anything before using a wire feed style but this one is so easy to use for the diy use. I fixed my kids broken trampoline galvanized steel pole and worked like a charm. I recommend this welder for any beginner.
@motordar
7 ай бұрын
That’s what I was wondering, if it would weld a galvanized trailer part
I have had the titanium multiprocess welder for about 4 years, ive used every mode and other than the tig being scratch start, i have 0 complaints about the machine.
The most important part of welding is that your metal is clean.
@terrydavis6132
Жыл бұрын
And a really good clean ground close to where you are welding , I've owned one of these for about a year now , built a complete front-end loader for a garden tractor with it , not one minute of trouble with it .
@Bigdickcactusman
Жыл бұрын
I weld Flux core directly on top of rust and mill scale
@Welderman007
Жыл бұрын
The most important part of welding is knowing how to weld.
I've been welding 3/16" and 1/4" angle iron, horizontal, vertical and overhead with this little green box and it welds great. Nice thick beads when you need it or dial it back for 1/16. Works great for outdoor projects using Lincoln innershield wire from HD.
@Dabbin916
8 ай бұрын
It’s light to and makes it easy for doing jobs and whatnot better than carrying a bulky heavy ass welder around
I have one. I love it. Welded a carriage today to use my 12 ton pneumatic bottle jack as a forging press and all of the welds tight on .125 angle iron and some 7 gauge. And that was about those same settings; not even maxed out! Only thing I don't like is that the slag doesn't always fully cover the weld. Not sure if it's a volume issue with the thinner wire or something to do with the inverter technology.
I have one of their original 90 amp welders and it does a good job for what I use it for. I like it so much that I bought a 125 amp welder as a backup unit in the event the 90 amp CROAKED. Like Clint Eastwood said in the Dirty Harry movie, Magnum Force "a man has to know his limitations". That is the same with Harbor Freight welders, you have to know their LIMITATIONS, if I was in the market for a new welder I would buy a Harbor Freight Titanium EasyFlux 125 Welder.
I have the Chicago electric 125 from harbor freight, it doesn't have as many options on settings but it works alright. I want to upgrade to the titanium soon.
Own it and I love it! Very easy to use and get used to!
I own one. I’ve used it on some small repairs. Works well.
I've had the same one for little over a yr now and have went through about 6 lb wire so far and I've been very impressed with it!! Definitely money well spent when on a budget next im really wanting multi process welder from yeswelder or primeweld!!
I have the Harbor Freight Chicago Electric 240 volt mig welder and I run it with flux cored wire. It has served me well.
@frankbailey9542
Жыл бұрын
It runs so much better with gas I have the same welder get some gas!
Own it and love it. It’s paid for itself many times.
Go prime weld! Amazing machines and about the same price.
A very good beginner welder.
This little thing is a beast, you can build almost anything as long as you either have a backer bar on or a deep enough bevel, I love it
I already have one and love it. It is amazing
These things are super AWESOME!!! Small yet get several jobs done!!!
I’ve used it in shop class, it welds good, if you go quick enough with the right speeds it’s really nice for sheet metal
@elicarter1356
Жыл бұрын
People who use flux or dual shield or anything with slag on sheet metal are actually clinically insane. Tig or low volts mig is the only right way
@UU-dp9th
Жыл бұрын
@@elicarter1356 on a budget, you do what works. Not what’s right 😂
@dsf4173
Жыл бұрын
@@UU-dp9thay g hate to be a bother but i got a titanium mig 170 barley gonna try welding no classes nada any advice on what wire feed or any advice
@UU-dp9th
Жыл бұрын
@@dsf4173 in the manual they have a diagram for what wire to use and what voltage/speed you need for the thickness of metal you’re working on.
@elicarter1356
Жыл бұрын
@@Sxvaqe-_- just work hard for my stuff. There’s a difference
I saw someone say to set it to A or B and wire speed to 3, am I really that underpowered with those settings on steel?
I own it. Now I need to learn how to properly weld with it.
@markmcleod5079
3 ай бұрын
Same here. The more I practice, evaluate the results and make adjustments accordingly, the better the welder seems to get. :)
I have owned one ever since they came out,just bought a second one today! Just in case my first one craps out.
Own it and love it
I own it love it
I own one and love it works great!!
This little Flux MIG is awesome for the price and it works very well. I used Blue Demon for Stainless car exhaust work with lots of prep work. For Standard steel it's been great with the Harbor freight wire. For big thick pieces I still use my STICK welder.
Looks good Jimmy..I would be it.😁💪👍👍
I’ve got it I think it’s pretty good for price. Just gotta get the settings right and it flow’s perfect for me
Have one, it does pretty good for what it is. It connects two pieces of metal together and they stay together, thats all that masters
Looks like it could do small jobs around the shop just fine.
I have had mine for a couple of years. I'm a DIY welder and use it for small metal projects. It's really handy for the beginner.
I’d like to see a it longer video rather than a short. That said, I do like the portability of this one yeah I’d probably consider buy that one.
already own one. Love it!!
Got one last spring and it's been great.
I own one and I love it 😀 Check to see about Reversing the Polarity and getting better welds and less splatter. 👌👍
That's my next welder. I currently have the Northern Industries 125 flux core welder and its "tired". I wish I could find parts for it.
I’ve got my settings here at f and 1/2
It’s on sale for 147.99 this week!
I have one ..i had 2 of the chicago before i bought the titanium welder..and you're right it is sick..i use cooking spray to make the beads not stick as bad..don't use the butter flavor it really smells bad ..canola seems best..the two chicago welders i gave away..still in good working condition ..
@TTime685
Жыл бұрын
Is it pretty much equivalent to the Chicago?
@westsidedavie
Жыл бұрын
@@TTime685 better in everyway.smaller,lighter.the settings are far more adjustable.inverter so it runs better
I just bought one of these and I was surprised at the strength of the welds it can make. I have been welding for 50 years but I never had a flux core welder so I'm in a sort of a learning phase. So far the welds i've cut and tested have shown a lot more penetration than I would have expected for such a cheap machine . So far so good. I even pushed it up to 1/4 inch stock to see if It would exceed the rated capacity. It did , but the weld was a little weak for my liking.
Yes man just got it and learning sbout it how to use it
I love this machine
As a factory certified welder repair tech for all major brands with over 20 years experience. Reguardless of machine color, they all evevtualy break. Major brands have better warranty support for parts. In most cases warranty does not pay for lost productivity. Most problems with small machine are caused by consumers that either do not read the owners manual or the information in the owners manual is beyond the operators comprehension. These inexpensive machines will be satisfactory as long as they are respected and operated within specs. If YOU purchase a less expensive machine and it breaks and YOU can't repair it, dont bother taking it to a repair shop. Just go back and buy another one!!!!!
@tommyhamel89
4 ай бұрын
Agreed, in general cheap is expensive. The duty cycle is 30% on these, 7 minutes of cooling for 3 minute of CONTINUOUS weld at 90 amp.
i love mine!
Had mine 2 years and love it
It looked like you had some undercut, maybe just a tad bit hot,also never weld galvanized metal,the fumes will poison you, it attacks the nervous system
@robertball3578
Жыл бұрын
For sure, grind off the galvanizing before applying high heat or else use a "supplied air" respirator.
Yeah, I'd buy one for my home stuff.
I just returned 125, no way to setup. Cold And wire did not come Fast enough. I went back to stick welder and it works well.
Good little machine love the built in inverter
Mine's been great so far
Gen 1 last a year gen2 has been modified so far it’s been good to me welded dump trailer ramps
Had to go to lowes and get the century version. It's pretty much the same thing. Love that litte welder. Just bought the 225 stick. Even on 120, it's twice the weld the little Chicago model is. Cost twice as much to. Now I'm looking at running dedicated power for both out back. DC inverted is the way to go, no doubt.
I’m thinking about buying one for personal use
Maybe close up looks bigger im.been thinking about getting one that's for the vid
I have the same one i used mine to repair commercial trailer and everything else that I need a welder for and it works great
What do the letters in the designation mean? Is there a chart that shows the differences in the various letters of the designation?
@Selendryle
8 ай бұрын
there is a chart under the lid (seen 13sec in) that gives a recommended speed and voltage per metal thickness. basically higher number/letter = more speed/power.
Love that little machine bought it 3 months ago on sale for 160 with the warranty best 200 dollar I ever spent i also made a little short for it nice video man
@Bubby4myTummy
Жыл бұрын
My girl just send me a coupon from Barbour freight $175
I have the titanium 170 and it’s a fine little machine. Much better than my Lincoln 135 T
I just bought this an I can feed wire with the cold wire feed,but when I push the gun trigger nothing happens at all,any help is appreciated thanks..
I have one. Works awesome. Does everything I need to do with it.
It really is a great welder. I picked one up for $100 a few years ago.
I bought one but need practice for sure. I have an old Pullman camper that I’m trying to weld up the gaps in the sides. Not sure if I had settings right! I welded heavier metal and did fine. But I bought some sheet metal to practice on.
Your hand are little high and lower your speed wire , use gel on the welding nuzzle ❤
Can it run on a generator?
Nice ! Im looking at this one and also a older used one from a friend. I can’t remember the darn name but in thinking its a bigger unit and maybe hood old fashion quality. Is this one plug into 110 or 220 ?
Will it hold up to heavier use based on your time with it?
I have a Harbor Freight titanium 125 and I love it Bob Elkhart👍👍👍👍👍👍👍👍👍👍👍👍👍
I own one and what I like is that I don't have to get the bigger welder with a extension cord to weld something outside if I can't get it in the shop
I have one of these. I upgraded the ground clamp, and the gun and cable. The gun is uncomfortable. It's too straight. I put a gun and cable from a Lincoln 140. It welds good.
I have it, and love it!
The best one. Used all weekend
What brand of Welding Jacket you're wearing?
Love it I use it for 4 wheeler and sxs frames and cages I use it for exhaust I use it for almost everything I do
This past weekend it was on sale for$149. I was going to buy it but got to busy
Just bought one for $145, black Friday deal at harbor freight, I've never welded anything in my life, but that's about to change, I'm going to teach myself to weld with this thing, just to do small fabrication stuff, nothing major, I've always wanted to learn and just caught this thing on sale and had to jump on it.
@Felipe-si1ho
7 ай бұрын
How's it coming along
@christophernayar6543
Ай бұрын
It’s been six months. Now it’s time for you to teach me. I’ve never welded anything before. Make a video on how to set it up from the box and the rationale behind how you select what settings to use and then an example of a first welding practice for me to try
I bought one and love it
I just bought it and it’s what I’m learning to weld with…
Can it do 3/16" on a 20A receptacle?
I've got one of those, and I have had excellent results from it. If you run the smaller diameter wires, you'll get much better results and a smoother weld
Could you use this welder for a gokart or bike project
I'm thinking about buying a welder. I only have a little experience welding and it was with a stick welder. I was working at a temp agency and got sent to a new complex. I was helping a company dig trenches for conductor lines for the sliding gate. I asked if I could try welding on the fence. I weld a line maybe 4 Inches and did ok for a first time weld. Should I buy a stick welder since I have a little experience with it?
I own this little welder and I think it's great!
Looking for a welder to run off my generator at 110/120v. Sheet metal, welding frame brackets etc. looks like this could be a winner.
I have two of these great little welders
Just bought one today….we’ll see!!
So flux core you don’t need to have the nozzle ?
Just bought I love it
how is it on thin automotive metal
Have one and it Really cool for a beginner.
$179 just looked it up. Getting one today, thanks
Any others that are easy to use like this? My son wants to build a light weight trailer for hos bicycle to haul.