Harbor freight Green spray gun
Автокөліктер мен көлік құралдары
0:10 talking about what we are spraying
1:20 me unboxing and cleaning
1:45 me spraying the parts
5:00 my final thoughts
Overall, decant gun for 25 bucks. The main upgrade with this gun compared to the purple gun is the air cap quality. Do I think they will phase out the purple gun? Yes. With the increase in shipping costs and manufacturer cost due to political reasons, there simply not making a good margin on the purple gun. So what do they do? Make a cool looking green gun which costs pretty much the same to make but sell it for 10 bucks more.
Пікірлер: 157
My bf dad has used them to shoot matte finished jobs with rustoleum grays and blacks and honestly they came out pretty solid especially for that quick budget diyer
I have a $10 Green Spray Gun from Harbor Freight, that I bought 20 years ago. It's been great. I have shot primer and paint. Can't complain. It still works.
Thank you for talking about things we want to actually know about the tool and not a bunch of bs I appreciate it
@speedokoterefinishnetwork4937
Ай бұрын
Absolutely
I appreciate your honest review.
@speedokoterefinishnetwork4937
3 жыл бұрын
Thanks!
If you pull off a nice job with junky tools it shows your true gift at your craft and shows the attention to detail 😉
@speedokoterefinishnetwork4937
3 жыл бұрын
Haha thanks!
@aprilgabrielrodriguez7158
3 жыл бұрын
@@speedokoterefinishnetwork4937 just saying not everyone gets the same results and you know that in a bigger body shop type setting the painters are the divas 😂😂😂😂
@PDofLA
3 жыл бұрын
YES INDEED! This guy is amazing. Besides, the more I watch him working, the less I get dirty. 🤣 I am a master at "PROCRASTINATION" ! 😄
@speedokoterefinishnetwork4937
3 жыл бұрын
@@aprilgabrielrodriguez7158 big body shop painters are the biggest babys and complain about how everyone else does stuff wrong. I'm over here no booth spraying open doors 40 degree weather and there like YOUR DOING IT ALLL WRONG ok bud....
@aprilgabrielrodriguez7158
3 жыл бұрын
@@speedokoterefinishnetwork4937 exactly if you prep and spray and it lays it will cure in its own time 😉 just think though no pollen dingers in the cold 😉😉
Great work Mark.
@speedokoterefinishnetwork4937
3 жыл бұрын
Thanks!
It is amazing that they can produce a $25 gun that puts out those kind of results even on a limited basis.
I bought this gun a year ago , your correct it must be cleaned first ! And I found when painting anything large like a pickup you can’t use the disposable cup system , it wants a vented top on the cup . I found it would chug when walking it down the bed of a truck . When I put the factory cup back on , no vent cap , it worked stellar ! U-pol clear worked great in the gun , I haven’t used speedcoat brand as of yet . But I’m sure it would work great . Hope you try it with the vented top cup .
@speedokoterefinishnetwork4937
2 жыл бұрын
Yea it's not bad for one time use
Nice job! Love that green 💚
@speedokoterefinishnetwork4937
3 жыл бұрын
It was free! I love free 😂😂 basically a welfare paint job 😂
@quintenbarker6620
3 жыл бұрын
@@speedokoterefinishnetwork4937 ⁷⁸⁸⁸
Another great tutorial. Thanks
@speedokoterefinishnetwork4937
2 жыл бұрын
Thanks!
Hell of a review brother!..thanks for your honest real opinion..
@speedokoterefinishnetwork4937
3 жыл бұрын
Thanks!
I don't know anything about spray guns, but this review makes sense
This gun loves lacquer paint , aka dupli-color paint I’ve painted a f250 complete job , a vw , a mini truck, yes the green finish came off but it still is rocking the paint ,and yes you are correct you must over reduce the clear , and it doesn’t like the disposable cup system , it flows better with a vented cup . Ten times better than the purple gun . For the price money well spent .
Thank you.
I bought this gun to spray clear coat on a replacement bumper cover. I cleaned the gun before spraying 2 coats of clear then disassembled the gun and cleaned it again. The next morning I sprayed 2 more coats of clear after a little wet sanding. After finishing I again go to clean the gun and after 1 night the inner nozzle piece that screws into the gun body already has rust in it. Sad cause I've had thier smaller detailing gun for months and never had an issue. So the moral of my story is You get what you pay for. Sprayed nice but made cheaply and won't last more than a job or two.
Thanks for the review. Looked like it came out pretty decent. I think all the HF stuff is def worth trying out...over trying to rattle can a car for the beginner.
@speedokoterefinishnetwork4937
3 жыл бұрын
Anything is better than rattle can. Just make sure you run low solids clears thro this gun.
@johnnycashh7148
3 жыл бұрын
@@speedokoterefinishnetwork4937 Well I bought the purple gun...but waiting until spring to try it. I got one job to do...and praying it comes out ok.
@mickeyflowers
Жыл бұрын
@@speedokoterefinishnetwork4937 so for a DIY'er what is a good starter gun other than this one? just want to buy a good one for me but want a pretty good gun without a big budget buster.
@speedokoterefinishnetwork4937
Жыл бұрын
@@mickeyflowers yea man buy it and try it out make sure your spraying low solids stuff
Thanks bro!!!!!!
@speedokoterefinishnetwork4937
3 жыл бұрын
Yup! Honestly it wasn't bad but really only good for a few useages.
Looks great So quick question did you sand the primer ??
Marco the first couple of jobs turn out ok after that (trash bin it ) use for primer 👍👍👍👍
@speedokoterefinishnetwork4937
2 жыл бұрын
Yup lol
I just started spraying my fishing lures with Speedokote clear and friggin love it. I would really love to see a video on how you clean your guns after spraying the clear. I feel like I should be using different cleaners for the parts.
@speedokoterefinishnetwork4937
3 жыл бұрын
Speedokote sells a spray gun cleaner, just take the gun apart spray all the parts and throw it back together easy!
@lonellrodgers8539
3 жыл бұрын
@@speedokoterefinishnetwork4937 Holy crap. Well take my money! That's awesome. Thank you.
@PDofLA
3 жыл бұрын
@@lonellrodgers8539 😂
@speedokoterefinishnetwork4937
3 жыл бұрын
www.speedokote.com/smr-800-speedo-spray-gun-paint-remover/
@danamcintyre3565
Жыл бұрын
I have used that product in the past if you want it to last I've had it want to lose it's shine after three years and it scratches way to easy like with a microfiber towel .
Great video as usual So is it good enough for just a few primer and 1 stage base coats with no clear coat bike and fender jobs?
@speedokoterefinishnetwork4937
2 жыл бұрын
Should hold up for a few jobs
Thank you for this video you are the man
@speedokoterefinishnetwork4937
Жыл бұрын
Appreciate you
@eduardoosorio5199
Жыл бұрын
I bought Speedo primer 4 years ago Ima spray tomorrow morning I have the green and purple gun any tips
@eduardoosorio5199
Жыл бұрын
I have a Srt4 I’m paint it but I’m doing it separately bumper trunk wing and the body kit
@speedokoterefinishnetwork4937
Жыл бұрын
@@eduardoosorio5199 really cheap guns are only good with low solids material don't try to spray anything thick through it
@eduardoosorio5199
Жыл бұрын
@@speedokoterefinishnetwork4937 if I spray clear over stage one paint would it look good I have a cut and buff pads and a whole System
Hi there, which PPS adapter are you using for the cup?
Tomorrow I have my first oficial paint job on the hot rod shop I work for, wish me luck I got a black widow gun hopefully it’s worth it cuz it seems I could’ve bought this 25 dollar one since I’m barely starting my painting career
@speedokoterefinishnetwork4937
3 жыл бұрын
Lol you should have bought my kit. I sell a black widow replica with an entire accessories kit for not much more than what the black widow costs
@MrEatthemeat
3 жыл бұрын
@@speedokoterefinishnetwork4937 sorry I did not know, I definitely want your products, seemed like they have a really good quality finish
What gun would you recommend im new to your videos but quickly become a subscriber
@speedokoterefinishnetwork4937
3 жыл бұрын
If your looking for the best value... I am re-stocking my brand of spray guns here soon. Best value - high quality, built to last.
What psi did you spray primer at?
Can i use the same gun for paint and gloss?
How did you get the fluid nozzle off? This green gun has been hard to take apart without damaging it. Thank you. Great Video 👍🏽
@speedokoterefinishnetwork4937
Жыл бұрын
Yea sometimes there put on so tight from the factory they can't come off. I'm a pretty strong guy and I'll say I struggled 😂😂😂 they build them this way because they figure 60-80% of people that use them will use them 3-6 times throw them out and just get another one
Hey great video! So what clear and activator did u use for that gun that sprayed well
@speedokoterefinishnetwork4937
Жыл бұрын
Speedokote smr130 works very well with it
What size tip did it come with?
Did you use the small Harbor Freight compressor with this gun? The McGraw 20 Gallon you did the other review on? Do you think this cheap gun would work with that cheap compressor? (Whole Car Paint Job) I don't paint often, at all, and don't have air tools, but if that set would work, I think the price would justify buying the set for touch ups.
@speedokoterefinishnetwork4937
3 жыл бұрын
Yea the mcraw 20 gallon works decant
Witta harbor freight gun lol dope
@speedokoterefinishnetwork4937
10 ай бұрын
Yup lol
One missing part of information I'm having trouble with, what minimum size air compressor do I need. I want to eventually paint my car. What specs on an air compressor should I look for? Scfm@90psi?
@speedokoterefinishnetwork4937
3 жыл бұрын
I currently have a 60 gallon which is best
What's the paint code for the fender? That green looks good! 🍏
@speedokoterefinishnetwork4937
3 жыл бұрын
6p5 I think
What did you spray on the headlights ?
Is the plastic thread insert replaceable? It may hold up as good as the cheap cast aluminum threads on the purple gun? Time will tell.
@speedokoterefinishnetwork4937
3 жыл бұрын
Not sure on that one
If I ran higher psi, could I get away with using a hs clear? Or do you think reducing it is an absolute must
@speedokoterefinishnetwork4937
3 жыл бұрын
Deffinatly reduce for sure
It's decent for the price...but I believe in buying quality and buying once. Of course you will pay more but if you want consistent quality work it's worth paying more.
@speedokoterefinishnetwork4937
2 жыл бұрын
Agree. Good for someone only using it a few times a year
what paint did you use
What type of spray of spray sock do you use on you exhaust fan? Thank you
@speedokoterefinishnetwork4937
3 жыл бұрын
Only epa approved media roll filter
Did you use the plastic filter that the gun came with.
@speedokoterefinishnetwork4937
3 жыл бұрын
Nope.. I was using a pps system which has a built in filter
I just ordered Speedokote Clear Coat 2K Acrylic Urethane, SMR-1150/1102-Q 4:1 Gallon Clearcoat Medium Kit and bought the same hvlp gun with the same 20gal mcgraw compressor. What psi did you run at and how long flash time?
@speedokoterefinishnetwork4937
2 жыл бұрын
24 psi, 5-7 min flash
@rickrivers2909
2 жыл бұрын
@@speedokoterefinishnetwork4937 Thank you!
Whats your thoughts on the spectrum? I got one but haven't used it yet.🎉🎉🎉🎉
@speedokoterefinishnetwork4937
11 ай бұрын
I sell my own guns, and only use my own guns for the most part couldn't tell ya
Man I see you had the door open and I could see the smoke coming from your mouth but you paint like your in a heated garage. And that fender looked great.
@speedokoterefinishnetwork4937
3 жыл бұрын
It's a combo of good skill, proper material usage and a little bit of heat gun action. Mainly material usage. The speedokote clear coat with fast activator is beyond amazing
@3rekoatskustoms929
3 жыл бұрын
@@speedokoterefinishnetwork4937 I agree looking to try the glamour clear fast drying soon.
@speedokoterefinishnetwork4937
3 жыл бұрын
@@3rekoatskustoms929 the glamor production clear is definitely great. Really like it
Did you have to do a lot of cut and buffing?
@speedokoterefinishnetwork4937
3 жыл бұрын
With these guns sometimes you will have to.. More expensive guns usually you can get off the gun quality results
What was the color you used on the fender
@speedokoterefinishnetwork4937
2 жыл бұрын
A Toyota green I'd have to find the code
I understand youtube, I understand why these videos are made. However, What is your go to gun.
@speedokoterefinishnetwork4937
3 жыл бұрын
Mine, Mark1 refinish pro kit.
@kronos89rs
3 жыл бұрын
@@speedokoterefinishnetwork4937 Can we run high solids clear through that baby? Oh and are you going to release just the gun??
@speedokoterefinishnetwork4937
3 жыл бұрын
@@kronos89rs nope not a chance. This thing will pee it's self and fall flat. And yes I am ordering a re-ship and will be restocking everything and also adding new spray guns. These are high quality guns and a fraction price.
@kronos89rs
3 жыл бұрын
@@speedokoterefinishnetwork4937 Sorry for the confusion but yeah I meant the mark 1 gun. Can we run HS through that? Looking at the SMR-135 to refinish my entire truck lol, needless to say it’s a crew cab silverado so kind of a big task 🤣
Do you think you will be spraying the hot rod black paint anytime soon?
@speedokoterefinishnetwork4937
3 жыл бұрын
Not sure on that bro! But I can try!
@roncarpenter8553
3 жыл бұрын
@@speedokoterefinishnetwork4937 Thank you, I thought that seeing the different sheens of the low voc hot rod black would just be cool. I can’t seem to find anyone else that has done it. Thanks again.
Elevator music? AC DC ? 😆
Is there anything kind of middle of the road? I see 10 dollar ones from HF then pro ones for like 300-1000. Is there like a 50-75 dollar gun that can get decent results?
@speedokoterefinishnetwork4937
3 жыл бұрын
The spectrum is not bad.. But it's 139 for just a gun. Then you gota buy fittings, regulator ect ect.
@sheldonstewart70
3 жыл бұрын
I was in our local HF about 2 weeks ago and they had a black and red gun that was around $225 , it felt good in my hands but I've not used it yet
@fernandosaldana3665
3 жыл бұрын
@@sheldonstewart70 get yourself the flg5 from devilbiss it's about 160-180 from spraygunsdirect check out the gunman videos about that gun👌 i have one in 1.3.
@aaronanderson5197
3 жыл бұрын
The chrome gun with the gold nozzle ring from harbor freight is probably the best one for the money. Its $75 has 1.3 tip, quality parts and sprays like a top line gun. I used one for a year when i started back at painting and never had any problems with it. Layed down base, clear and single stage urechem...even rustoleum like glass. I still have it and still use it for jobs once in a while. Not much overspray either.
@55chevytruck
3 жыл бұрын
@@aaronanderson5197 I have the same gun and it works pretty good.
I have 2 cars I want to spray, super big time noob. could email you or what’s the best way to contact you for advice on what tools/products I need to buy. lol I’ve watched about a dozen of your videos now 😎
@speedokoterefinishnetwork4937
2 жыл бұрын
I sell all the spray gun equipment you could ever want or need . As far as paint I use 99% speedokote everything . As far as a compressor 20-60 gallon will do fine always monitor air pressure
Does it come with the spray gun wrench 🔧?
@speedokoterefinishnetwork4937
2 жыл бұрын
Don't think so , they have gotten do cheap over the years I remember like 6-10 years ago the harbor freight cheap spray guns always came with a wrench and a cleaning brush Now it's just the Gun and cup.
@descolero1
2 жыл бұрын
@@speedokoterefinishnetwork4937 oh I was just wondering since i just bought the purple one. If the green one had the tool I would've returned it and bought the green one. Thank you for replying.
Is was hard to spray with the gun
The good: that gun sprays well. But you have to crank the fluid nozzle off to clean it's not even worth it. The bad: the threads for the fluid adjustment knob is a piece of threaded plastic. If you're spraying very little maybe a few times a year go for it.
@speedokoterefinishnetwork4937
Жыл бұрын
Yup good point
#team gat tagteam cool shirt
Does speedokote clear coat shrink back alot
@speedokoterefinishnetwork4937
3 жыл бұрын
First off all say this, all clear coats shrink.. ALL of them.. However some shrink more than others. I have a 2 week shrink test comeing out on our Smr135 in the next video towards the end, no cracks minimal shrinkage and remains flexible
@kashflow3426
3 жыл бұрын
I'm going into business for myself painting at home for now Which speedokote clear is a all around good clear to use
@speedokoterefinishnetwork4937
3 жыл бұрын
@@kashflow3426 Smr135 to keep things cheap and still get amazing results
What's your opinion of running single stage through it?
@speedokoterefinishnetwork4937
3 жыл бұрын
I probably wouldn't
@Spennyman10
3 жыл бұрын
@@speedokoterefinishnetwork4937 Ok thanks man. Great vids!
@aslmx1918
2 жыл бұрын
What cheaper gun would you do single stage with?
@Spennyman10
2 жыл бұрын
@@aslmx1918 The purple Harbor Freight gun. Around $16. Works great.
I guess this is why I have 4 Iwata's.....
@speedokoterefinishnetwork4937
3 жыл бұрын
I'm about to sell all my name brand guns lol
I had this gun and took it right back because of the plastic piece
@speedokoterefinishnetwork4937
3 жыл бұрын
Yea it's not guna work long term. They do this for cheap production.
I'm pretty sure they just made the purple gun green and marked it up $10
@speedokoterefinishnetwork4937
3 жыл бұрын
LOL BASICALLY
How many cars you've painted in a span of 15 to 20 years and experience, will determine the quality of these cheap hvlp spray guns
@speedokoterefinishnetwork4937
2 жыл бұрын
A good amount. I think its a decant gun for a starter guy DIY guy.
@ivor7407
2 жыл бұрын
@@speedokoterefinishnetwork4937 when you pointed out the plastic threaded insert on the cheap Harbour Freight gun I knew you a valid point.
That’s gonna be a pass for me , I saw it ar hf , one good look at the gun , I was not impressed at , might as well get 2 purple guns for the price of a not that much better gun
@speedokoterefinishnetwork4937
3 жыл бұрын
There guna phase out the purple guns most likely. Not enough profit on them
So, the gun is not going to last for daily use.
@speedokoterefinishnetwork4937
3 жыл бұрын
No
The user is more important gun . I have seen guys pull off good paint jobs with $15 dollar gun . And Guys with $1000 gun completely destroy a paint job .
Zero skills so I can’t fiddle with a spray gun. I need something that works. What’s a great gun that won’t sink the boat.
@speedokoterefinishnetwork4937
Жыл бұрын
This one
It's a $25 dollar gun buy more then one !
Peopke talk mad sh*t about the purple gun and say stupid things like you cant use it to prime with. Let me assure you it's all lies and propaganda. I've owned tge purple gun for over a year and have primed with it 3-5 times a week on a normal week and sometimes up to 10 times. I've put 200 cups of primer through that gun easily. You absolutely have to clean it THOROUGHLY after each cup, but it will spray 2k primer Straight Out of the Box and it does a good job at it. I'm only just now having issues with it which is why I just bought its green cousin. I actually used the purple gun and cleaned it so many times that I wore every bit of purple off of it. If the green one only lasts me 20 times as you said I'm gonna be pissed