This is the most honest review for someone like myself to see lol! This is the exact auto body skill level I bring to the table. I appreciate it man!

@jspeedracing

2 жыл бұрын

Thanks man! Glad to help. Make sure to subscribe 👍

Not bad I’m gonna pick one up tomorrow ..thank you for the review

@jspeedracing

3 жыл бұрын

right on man

@hellcatredeye-g6582

3 жыл бұрын

@@jspeedracing It worked out well thanks again

I think you did a pretty good job. Is it perfect absolutely not sometimes we just don't need perfect. I'm actually going to pick one up. My friend was driving my expedition last Summer and claims somebody backed into the driver side back door. All the damage is below the body line and it's a couple big ones and one or two smaller ones. Watching what you did I think I could get mine pretty darn close. Thanks for sharing your view of this product. I definitely made sure to hit the like button and the subscribe button. I always feel that's the least I can do when someone does a good review.

@jspeedracing

Жыл бұрын

Thanks David!

@YourMothersHouseChillin

9 ай бұрын

You're friend was was driving your car with your wife in the passenger seat. Sounds like he was too busy to watch the road.

Can you assess the dent from the trunk? I’ve always got good results by rolling a ball against dents from inside the trunk.

I'm just a guy with a Harbour Freight puller lol JON'S BODYSHOP I wish we had Harbour Freight over here 👀 Nice job 👍

@jspeedracing

3 жыл бұрын

Big Keg 😂😂 You know we can fix anything over here. JK. I love harbor freight

@willpower3544

3 жыл бұрын

@@jspeedracing BK we got supercheap right

Considering there are loads of companies selling the identical tool (re-branded) for over 300, I'd say you got a bargain. They all come out of the same factory, but get sold at waaay varying prices. :-)

That's pretty great stuff for drifters! Regards Nico.

@jspeedracing

3 жыл бұрын

oh for sure!

Nice work man. 🙏🏼

@jspeedracing

3 жыл бұрын

Thanks bro 👍

Hey it's the guy with a harbor freight puller

Looks good need to use it on my car.

@jspeedracing

2 жыл бұрын

for sure!

Wow not that noticable anymore! Great Work! Kinda late I was tired after school🤣

@jspeedracing

3 жыл бұрын

Thanks Timurs, good little tool to keep on hand. For sure helps!

They work well

I like it but question is does it work without air pressure think?I don’t have air pressure tools.

@jspeedracing

3 жыл бұрын

No it needs air sorry

@living9377

3 жыл бұрын

@@jspeedracing how much air? Will a pancake compressor work and what psi did u use?

@jackprice3833

3 жыл бұрын

Check the specs on the puller , you can get a descent compressor for pretty cheap now days

How does the compressor create suction?

Which type of air compressor could I use for this tool? Would a portable tire air compressor work? What do you recommend

@jspeedracing

2 жыл бұрын

ya i would think a small one would work just fine

what spray was used before you used the dent puller?

@jspeedracing

2 жыл бұрын

brake clean. It's strong so only use a little on a rag. It will take off your paint lol

WD 40 works great too instead of brake fluid .

@jspeedracing

Жыл бұрын

Great tip!

Def buying one lol. Than returning it after.

@jspeedracing

2 жыл бұрын

hahahah smart man

@jshaka3769

2 жыл бұрын

@@jspeedracing I see your a fellow a man of the arts ❤️💪😂

@Fracking2319

6 ай бұрын

Just picked one up yesterday. Thanks for the life hack 😂🫡

Do these come with small suction cups? I have small dents on my driver door and on the wheel well. It did do a decent job in your video. Thank you for the review.

@jspeedracing

2 жыл бұрын

it comes with two sizes of cups

@stubobish

2 жыл бұрын

@@jspeedracingOkay. Thank you.

Do I need a big air tank for more suction ? Or is a small one good enough ?

@jspeedracing

2 жыл бұрын

Small one will likely work

এইটা আমি কিভাবে কিনবো আমি কিনতে চাই এইটা কোথায় পাব

Hello sir i have a problem with my new air dent removal tool. I bought two tools with the same problem, no vaccum, i have 10 bar compressor. I already post a video you can also see it. can you help me please! Thank you very much 🙏💐.

@jspeedracing

2 жыл бұрын

Make sure you flip the little lever. It has to be a clean smooth flat type surface too

What used in the beginning for the scratch marks

@jspeedracing

2 жыл бұрын

Brake clean

may I invite you to shoot a video for my dent puller kit?

welp... time for over fenders...

Do u think this will work with a small air compressor

@jspeedracing

Жыл бұрын

Probably

@RCdetails203

Жыл бұрын

@@jspeedracing thank u I bought it and it works 👍🏻

I suggest to you all hot glue pulling

@wesoblander3648

Жыл бұрын

That is a bad suggestion considering the crease line and how close it is to the very edge of the fender.

Brake cleaner ouch

@jspeedracing

3 жыл бұрын

Or you can polish if you want

It still looks like crap, which means the whole process was pointless

Show the freaking work not your self man!!!

@jspeedracing

3 жыл бұрын

Sorry lol Im new

@wesoblander3648

Жыл бұрын

Shut your mouth and go play with your little smokey.

Step away from the tool.

@jspeedracing

2 жыл бұрын

🙂