Harbor Freight 3 inch Air Polisher Item#60611 If you would like to support the channel: www.amazon.com/hz/wishlist/ls...
Жүктеу.....
Пікірлер: 28
@jonathang.638 Жыл бұрын
Perfect. Going to grab one from Harbor Freight and polish up the aluminum on the truck, it is a 2021 Freightliner, aluminum is still new so it will shine up pretty quick. Thanks for the video!
@darmakiss48294 жыл бұрын
Try cleaning it too, you don't buff with dirt.
@LEEELLISOutlaw
2 жыл бұрын
Lol definitely clean off the oil first
@tacticalty96934 жыл бұрын
You don’t wipe the polish til finished the polish turning black like that is doing exactly what it’s supposed to
@precastdriver2 жыл бұрын
That’s a good tool for touch up polishing , I used that for years on my Peterbilt, when standing by that’s a good machine to use to do touch ups, to cut I prefer a makita or dewalt variable speed with a 8” airway orange wheel and that brown rouge. Then hit it with the yellow and green and then to finish you can use something like that tool he’s using with some good hand polish
@MoneyisanIllusion
2 жыл бұрын
Yes I later realized I need the dewalt grinder with the wheels and brown. Might have to try when it warms up.
@stormpatriots93634 жыл бұрын
You can also use 0000 steel wool with mother’s polish. It sounds crazy but it actually works very well.
@taylorframpton2129
4 жыл бұрын
On chrome yes. Not aluminum
@MrSlimyslime
2 жыл бұрын
Perfect for ripping through the protective coating to cause premature rusting!!
@seanathighwaystar95884 жыл бұрын
Wish he had watched a video on polishing wheels before this was made. He’s used a “LOT” of product in this video, and unfortunately the wrong starting product. First and foremost, wash the wheel! Get that heavy loose dirt off, then deoxidize, for horribly corroded wheels like that, use acid, followed immediately by an alkali cleaner, then a compound that moderately aggressive, and then finish with that Mothers product. The problem wasn’t the tool, it was when and how it was used. Your just basically “sanding” your wheel and swirling in contaminates that will keep that wheel from ever getting shined to its full potential. 🤦🏽♂️
@88krazie
4 жыл бұрын
I was going write a response when i saw yours, i agree when i 1st saw this, but as you know there alot of backyard DIY'ers that will not invest the time into doing it the right way.
@nothinspeacial1473
Жыл бұрын
🤦♂️
@macknight18812 жыл бұрын
If you had a better polish then mother's you'd be looking damn good. Honestly it looks way better than before
@MoneyisanIllusion
2 жыл бұрын
I am thinking I need one of those 9” grinders and all the cutting and polishing compounds
@88krazie4 жыл бұрын
Where do i start, if you want a great outcome you have to follow the right steps, you missed almost every step and went right for the second to last step. The last step would be to coat your rims with a good sealant, all that work you put in you want it to last, but prior to that you missed all the prep work needed before you even picked up that tool. Was painful to watch PS ALWAYS tape your tires, good luck getting that residue off your tire.
@Electrolab28Ag4 жыл бұрын
If you sand the rim with 1500 to 3000 grit sand paper and then polish it will come out like chrome.
@ruderocky1431
3 жыл бұрын
Wet sand?
@Electrolab28Ag
3 жыл бұрын
@@ruderocky1431 You can wet sand up to 2500 Grit and then dry sand with 3000 and polish after.
@Aquatic_Amigo4 жыл бұрын
Wow how long it take you to do the whole wheel
@MoneyisanIllusion
4 жыл бұрын
I quit hahaha I’m gonna have a guy on Facebook do it in the spring
@greggriffin32423 жыл бұрын
He definitely needed something to cut through the oxidation dirt grime first
@briansturgill5905 Жыл бұрын
Have to clean the dirt off first. Start with a clean surface.
@MoneyisanIllusion
Жыл бұрын
I’m going to order the big dewalt and all the compounds
@precastdriver2 жыл бұрын
Definitely don’t use mothers unless your Alcoa is brand new lol 😂 or close to new 😆
@nancyh.24695 ай бұрын
Pneumatic buffer video
@G35Jeesh Жыл бұрын
Lol seruously ? At least wash the dirt off before polishing.... come on dude
Пікірлер: 28
Perfect. Going to grab one from Harbor Freight and polish up the aluminum on the truck, it is a 2021 Freightliner, aluminum is still new so it will shine up pretty quick. Thanks for the video!
Try cleaning it too, you don't buff with dirt.
@LEEELLISOutlaw
2 жыл бұрын
Lol definitely clean off the oil first
You don’t wipe the polish til finished the polish turning black like that is doing exactly what it’s supposed to
That’s a good tool for touch up polishing , I used that for years on my Peterbilt, when standing by that’s a good machine to use to do touch ups, to cut I prefer a makita or dewalt variable speed with a 8” airway orange wheel and that brown rouge. Then hit it with the yellow and green and then to finish you can use something like that tool he’s using with some good hand polish
@MoneyisanIllusion
2 жыл бұрын
Yes I later realized I need the dewalt grinder with the wheels and brown. Might have to try when it warms up.
You can also use 0000 steel wool with mother’s polish. It sounds crazy but it actually works very well.
@taylorframpton2129
4 жыл бұрын
On chrome yes. Not aluminum
@MrSlimyslime
2 жыл бұрын
Perfect for ripping through the protective coating to cause premature rusting!!
Wish he had watched a video on polishing wheels before this was made. He’s used a “LOT” of product in this video, and unfortunately the wrong starting product. First and foremost, wash the wheel! Get that heavy loose dirt off, then deoxidize, for horribly corroded wheels like that, use acid, followed immediately by an alkali cleaner, then a compound that moderately aggressive, and then finish with that Mothers product. The problem wasn’t the tool, it was when and how it was used. Your just basically “sanding” your wheel and swirling in contaminates that will keep that wheel from ever getting shined to its full potential. 🤦🏽♂️
@88krazie
4 жыл бұрын
I was going write a response when i saw yours, i agree when i 1st saw this, but as you know there alot of backyard DIY'ers that will not invest the time into doing it the right way.
@nothinspeacial1473
Жыл бұрын
🤦♂️
If you had a better polish then mother's you'd be looking damn good. Honestly it looks way better than before
@MoneyisanIllusion
2 жыл бұрын
I am thinking I need one of those 9” grinders and all the cutting and polishing compounds
Where do i start, if you want a great outcome you have to follow the right steps, you missed almost every step and went right for the second to last step. The last step would be to coat your rims with a good sealant, all that work you put in you want it to last, but prior to that you missed all the prep work needed before you even picked up that tool. Was painful to watch PS ALWAYS tape your tires, good luck getting that residue off your tire.
If you sand the rim with 1500 to 3000 grit sand paper and then polish it will come out like chrome.
@ruderocky1431
3 жыл бұрын
Wet sand?
@Electrolab28Ag
3 жыл бұрын
@@ruderocky1431 You can wet sand up to 2500 Grit and then dry sand with 3000 and polish after.
Wow how long it take you to do the whole wheel
@MoneyisanIllusion
4 жыл бұрын
I quit hahaha I’m gonna have a guy on Facebook do it in the spring
He definitely needed something to cut through the oxidation dirt grime first
Have to clean the dirt off first. Start with a clean surface.
@MoneyisanIllusion
Жыл бұрын
I’m going to order the big dewalt and all the compounds
Definitely don’t use mothers unless your Alcoa is brand new lol 😂 or close to new 😆
Pneumatic buffer video
Lol seruously ? At least wash the dirt off before polishing.... come on dude
And your technique isn’t steady and consistent