Those goggles look really cool, I'll have to check those out...!

Yeah, pretty clear that the BAT voltage setup in Betaflight needed tweaking. For those small models with a linear antenna on them, you might consider getting a Menace RC Bandicoot Linear patch for the goggles ... a much better performer than the monopole whip. The aluminum prop guards look good, as the plastic ones have a tendency to fail/break after multiple bounces off of things (flexing as they go). I do have a tiny whooper, the Eachine E010S, but its got brushed motors, so the brushless update would be a plus, since I can only fly mine outdoors under almost windless conditions .. its easily blown away. Hope that one motor connector holds up for you. Thanks for the review. Cheers.

I had the osd low voltage warning problem with my whoops when I switched to Betaflight 3.4, just change the upper voltage limit to 4.4v and you won’t get the warning on a full battery. I believe it’s the HV batteries confusing the sensor logic.

Really nice, Dustin! It's a really great little one! 😃

Nice! I think you just hit everything just about except for the TV! Awesome review man! 😆 👍🏽 Also those goggles seem pretty good and checks all the boxes 😁

@DustinDunnill

6 жыл бұрын

Thanks man. Yes I did, this little guy is very durable 😁👍

That was a awesome review , i love the goggles they really look sharp , well done my friend well done

Great review Dustin 😉👍🍻

very nice review and demo

Looks like a fun little drone! I want one!!

Great video! Would live to see a comparison with the UR65 if possible? Seems to be the battle of the best brushless whoops!

This little brushless whoop is so cool!!! And so are the fpv goggles!!! I really want a brushless whoop really bad!!!! And i NEED good f.p.v. goggles so bad!!! Goggles are the one thing holding me back from really enjoying this amazing hobby! Great review i like & want both lol!!!! 👍😀👍

100% I was about to push the buy button and I seen your number 1 in my notifications said id watch this first and low and behold the drone I was meant to buy .. this is a sign I know it lol

@DustinDunnill

6 жыл бұрын

😂

WOW, Great FPV, those googles look better that the red fat shark one you did the last review with the last racing drone. That little drone is pretty cool, even with all that bashing you were doing it seem to take it. Maybe the connector was faulty on the drone itself. Great video

Dustin could you tell me what if any goggles has just one screen that would be worth buying i only have 1 eye so i dont need one for each eye new to the hobby i enjoy watching your video's trying to get my KZread channel going hard to find time Thanks John

Great stuff brah!!!

@DustinDunnill

5 жыл бұрын

🍻🤙

Cool score brother, 😊🍻

Awesome video good information

Can you post links for your remote and goggles?

The kid on the TV was playing hunter COTW lol. Love that game

Pinball whoop,nice 1 brotta:)

@DustinDunnill

6 жыл бұрын

🤣 yep 🍻

Ha! Ha! Ha! Great flying Dustin.. I think you hit just about everything... A great review my friend... Thank you :-)

@DustinDunnill

6 жыл бұрын

😁 gotta test durability 😁

All Snappers seem to have an offset voltage sensor. It can be adjusted in Beta flight.

@DustinDunnill

6 жыл бұрын

Indeed 👍

Did you get the basic or standard?

This is exactly the same as the uruav ur65. That one has a plastic frame which is actually pretty strong. I’ve also tested the difference between a linear antenna and a cloverleaf antenna. I get much better fpv range.

Hi Dustin could you do a review of the Ryze tello would like to see how it compares to the hubsan x4 desire.

@DustinDunnill

5 жыл бұрын

Yes, I've got one but haven't got around to reviewing yet 😂

@kylevictor6254

5 жыл бұрын

Awesome ill be waiting :)

Just seen the weather that's heading towards you!! Our thots will be with you and the Family!! Cheers mate.

@DustinDunnill

6 жыл бұрын

Thanks. We are prepping for the storm 👍

Why does it flash "land Now"

I’m surprised that it started flashing “land now” from the moment you lifted off.

@DustinDunnill

6 жыл бұрын

Voltage settings need tweaking in betaflight 👍

I had similar issue with one motor at mine Snapper7. Sometimes didn't started at all. After time I realised at bottom of each motor there is a little wire which touching with copper part the bearing. And this wire is hanging out a little at each motor. And at one of motors isolated part of this wire was touching and breaking the motor. I just used some tiny knife and bend the wire that just copper part touching now bearing, without isolated part. And now motor spins as should. This could happens to anyone. Probably during shipping drone leaned on wire. But is easy fix and now Snapper works great. (Y)

By what I saw(I also saw some other review) HappyModel SNAPPER 6 looks to be the best tiny whoop, at least for me. It is just great, brushless motors, OSD, nice prop protection. Just the best what can get. (Y) For goggles is hard to say. Should be tested outside with diversity module to get final conclusion. But the whole package looks very good. (Y)

How would these goggles work with the better drones like the Anafi?

@DustinDunnill

6 жыл бұрын

The won't unless you have a device that can output HDMI

@Okie-Tom

6 жыл бұрын

Dustin Dunnill , watch out for the Hurricane headed your way!

@DustinDunnill

6 жыл бұрын

Thanks, hoping it veers off from predicted path 😮

@Okie-Tom

6 жыл бұрын

Dustin Dunnill you will have to upload some video of the winds and rain you have.

Wowww

you for got to leave links , :(

😊👍

@DustinDunnill

5 жыл бұрын

🙂✌️

Guys this is only for 50 dollars in aliexpress, buy it!

Drops to 3.0V with full battery on start? Lol.

@DustinDunnill

6 жыл бұрын

Yah voltage settings need a tweak

Pokey wants some attention.

@DustinDunnill

6 жыл бұрын

🤣

I see weapon in 13:50 OMG😰

Great vid Dustin! It looks like the Snappers receivers have voltage telemetry as mine made my radio beep constantly with low battery warning almost from the get go. You can lower the warning voltage in the flysky radio and it won't beep so much of you have the same issue. I've also had a little issue where 2 of the wires have pulled out from the motor connectors that plug into the board. It's a finicky solder job putting them back together, but I think a dab of hot glue or epoxy would nail them down. Ripping around your kitchen I'm not sure if I'm watching a Nick Burns vid or a DD video lol! Great fun! kzread.info/dash/bejne/qGxhz5SBZsqodco.html

@DustinDunnill

6 жыл бұрын

Thanks bro 👍

Wo

whats that SBR @ 13:49 ? and hows the 2nd Amendment holding up in Hawaii?

He needs to learn how to fly lol

3th

6th

@pilipinoinventer5559

6 жыл бұрын

Can you plss..give me that drone as an give away plss..also an advanced birthday gift to me plsss...