My guys fabricating plaster moldings in the field by hand on our current residential renovation
Жүктеу.....
Пікірлер: 43
@mgabrielle23434 жыл бұрын
I have created many mouldings using bonding plaster for walls, in UK it is called bonding, and after setting it you can bake it in the oven for 4 hours at 150 degrees and they became solid as rock, I used them for replacing some missing decorative brackets or supports under a window sill, though they were for decorative purpose as the sills did not require physical support to the overhang.
its plaster of paris you get it from any builders merchant who deals with the plastering industry but one note its not easy to work with cause it goes off very quickly
@7lifeliving8 жыл бұрын
Great video! Question for you guys what 2 kinds of plaster are you guys using.
@afzalm4933
8 жыл бұрын
Dears Extra fine POP is 200mesh having Drytime 20-30minutes it can also be used inMedical system as in Prosthetic and orthotic sciences. another one POP is 100-150mesh having dry time 15-20 minutes.
@ronaldmartin7892
Жыл бұрын
That looks like lime putty and casting plaster.
@memylastname99726 жыл бұрын
For gods sake get a bucket and a splash brush! Why didn’t they run the reverse and just cast the cornice??
@fordguyfordguy8 жыл бұрын
Is the product called level quick?
@cacheteflow10 жыл бұрын
Hello. I´m trying to do a plaster cornice. But all of it has little bubbles in the front side. What should I do to avoid that?
@zombienation720
10 жыл бұрын
Did you use a brush? that usually gets rid of air bubble and bounce the mould aswell
@CooCuMbEr
9 жыл бұрын
Camilo Loyola tap the mould with a hammer to ring the bubbles to the top..... this is a very lenghty process that can be shortened by about 80% on this vid
@AdenHynesSculptureStudios6 жыл бұрын
Just out of interest, how come you guys don't simply create a relief mold, and lay up the plaster so that each cast comes out with the smooth front surface already made each time? Rather than needing to create the front surface?
@ronaldmartin7892
Жыл бұрын
I thought that. But he I believe renovating some protected British Heritage buildings require any replacements to be made as the original installation. In this case maybe the original cornice was run in situ using slaked lime putty and plaster. Running it on the bench and using hessian canvas to strengthen it may have been an easier and acceptable alternative.
@uzbdecor8 жыл бұрын
what kind of gypsum you us? where in USA i can find?
@afzalm4933
8 жыл бұрын
Dear Sir you can use 150Mesh POP having DryTime 15-20minutes.
@austinjay5915
6 жыл бұрын
How we do it in USA you get straight lime mix it over night put water on it then get plaster moulding make a ring with the lime pour water in it put moulding in it more moulding the faster the set up time usually a 1 to 1 with moulding
@somis81
Жыл бұрын
Its 20 minute casting plaster from most masonry yards
@francisloveson9397 жыл бұрын
Please I will need some of the moulds to buy and set up a small business in Ghana so kindly mail with the types and prices,,thanks
@CHET..
6 жыл бұрын
Sir please if you got these information please give me too.. please sir
@user-on7ht4ej3d4 жыл бұрын
👌👌👌👌👍👍👍👍👍🌷🌷
@joywashername10 жыл бұрын
Hello, wondering if you give classes in NY?
@irvinwittmeier5208
5 жыл бұрын
Really you need a class you just watched it grow a pair ! Oh thats right you said NY go to your safe space think about it then lock the door drink your cool aid
@laurenpowers6979
4 жыл бұрын
@@irvinwittmeier5208 whoa chill the fuck out. Why the hell do you care if someone wants to take a class? This video show what they're doing but gives no detail.
@luissanchez1159
2 жыл бұрын
Sadie, call the NY plaster union office and they can help you.
@jmagic-yn7tl6 жыл бұрын
two people working work to one :( hmmm ... best :)))
@strandedpirate6346 Жыл бұрын
The music isn't annoying or loud enough, you can do better.
@MissionaryForMexico2 жыл бұрын
Instead of playing loud music as opposed to background music with a person speaking, explaining what and how you are doing?
@jimdeisley4017
5 ай бұрын
Agreed the music was really loud and annoying
@siemprepositivo6887 жыл бұрын
The music it's terrible
@TheLazyGuyWay
6 жыл бұрын
Got a headache horrific music
@kailiangiuli9176
6 жыл бұрын
Then you could of turned your sound off
@OctavioVillegas5 жыл бұрын
Great video, terrible music. Sorry.
@lukerification8 жыл бұрын
I can run cornice better than this..... why you put lime putty in the mix??
@DarleneFormanek4 жыл бұрын
could do without music and you could talk gheezzz
@georgelacey48166 жыл бұрын
So slow and inefficient. Just lets the plaster fall off the end.
@t.e.1189 Жыл бұрын
Why the repetitive obnoxious music? Why the repetitive obnoxious music? Why the repetitive obnoxious music? Why the repetitive obnoxious music? Why the repetitive obnoxious music?
@lolitabonita084 жыл бұрын
wf???If u are showing something at least TEACH SOMETHING>..explain what is going on...otherwise add in the title...this video is a waste of time...so people do not waste time watching it...
Пікірлер: 43
I have created many mouldings using bonding plaster for walls, in UK it is called bonding, and after setting it you can bake it in the oven for 4 hours at 150 degrees and they became solid as rock, I used them for replacing some missing decorative brackets or supports under a window sill, though they were for decorative purpose as the sills did not require physical support to the overhang.
Great video really like the music
Esto lo necesito, gracias por publicarlo
very interesting !
Good job
Masters!!!!!!!!!!!!!!!!!!!!!!!!!!!!! decoratore ..........
its plaster of paris you get it from any builders merchant who deals with the plastering industry but one note its not easy to work with cause it goes off very quickly
Great video! Question for you guys what 2 kinds of plaster are you guys using.
@afzalm4933
8 жыл бұрын
Dears Extra fine POP is 200mesh having Drytime 20-30minutes it can also be used inMedical system as in Prosthetic and orthotic sciences. another one POP is 100-150mesh having dry time 15-20 minutes.
@ronaldmartin7892
Жыл бұрын
That looks like lime putty and casting plaster.
For gods sake get a bucket and a splash brush! Why didn’t they run the reverse and just cast the cornice??
Is the product called level quick?
Hello. I´m trying to do a plaster cornice. But all of it has little bubbles in the front side. What should I do to avoid that?
@zombienation720
10 жыл бұрын
Did you use a brush? that usually gets rid of air bubble and bounce the mould aswell
@CooCuMbEr
9 жыл бұрын
Camilo Loyola tap the mould with a hammer to ring the bubbles to the top..... this is a very lenghty process that can be shortened by about 80% on this vid
Just out of interest, how come you guys don't simply create a relief mold, and lay up the plaster so that each cast comes out with the smooth front surface already made each time? Rather than needing to create the front surface?
@ronaldmartin7892
Жыл бұрын
I thought that. But he I believe renovating some protected British Heritage buildings require any replacements to be made as the original installation. In this case maybe the original cornice was run in situ using slaked lime putty and plaster. Running it on the bench and using hessian canvas to strengthen it may have been an easier and acceptable alternative.
what kind of gypsum you us? where in USA i can find?
@afzalm4933
8 жыл бұрын
Dear Sir you can use 150Mesh POP having DryTime 15-20minutes.
@austinjay5915
6 жыл бұрын
How we do it in USA you get straight lime mix it over night put water on it then get plaster moulding make a ring with the lime pour water in it put moulding in it more moulding the faster the set up time usually a 1 to 1 with moulding
@somis81
Жыл бұрын
Its 20 minute casting plaster from most masonry yards
Please I will need some of the moulds to buy and set up a small business in Ghana so kindly mail with the types and prices,,thanks
@CHET..
6 жыл бұрын
Sir please if you got these information please give me too.. please sir
👌👌👌👌👍👍👍👍👍🌷🌷
Hello, wondering if you give classes in NY?
@irvinwittmeier5208
5 жыл бұрын
Really you need a class you just watched it grow a pair ! Oh thats right you said NY go to your safe space think about it then lock the door drink your cool aid
@laurenpowers6979
4 жыл бұрын
@@irvinwittmeier5208 whoa chill the fuck out. Why the hell do you care if someone wants to take a class? This video show what they're doing but gives no detail.
@luissanchez1159
2 жыл бұрын
Sadie, call the NY plaster union office and they can help you.
two people working work to one :( hmmm ... best :)))
The music isn't annoying or loud enough, you can do better.
Instead of playing loud music as opposed to background music with a person speaking, explaining what and how you are doing?
@jimdeisley4017
5 ай бұрын
Agreed the music was really loud and annoying
The music it's terrible
@TheLazyGuyWay
6 жыл бұрын
Got a headache horrific music
@kailiangiuli9176
6 жыл бұрын
Then you could of turned your sound off
Great video, terrible music. Sorry.
I can run cornice better than this..... why you put lime putty in the mix??
could do without music and you could talk gheezzz
So slow and inefficient. Just lets the plaster fall off the end.
Why the repetitive obnoxious music? Why the repetitive obnoxious music? Why the repetitive obnoxious music? Why the repetitive obnoxious music? Why the repetitive obnoxious music?
wf???If u are showing something at least TEACH SOMETHING>..explain what is going on...otherwise add in the title...this video is a waste of time...so people do not waste time watching it...