Handmade miniature dollhouse furniture I want to make an antique style cabinet.
Тәжірибелік нұсқаулар және стиль
This is a 1/12 scale miniature furniture.
When I googled the name of this kind of glass, I found out that it's called "haze glass".
It's been a while since I've used a UV light and resin, and I was worried about whether it would work since it was 4-5 years old, but it worked fine. I'm so glad I did.
This channel focuses on miniatures, dollhouses, paper crafts, and DIY.
I'm sure you'll enjoy it, and I hope you'll rate it, comment on it, and subscribe to it.
This is the first time I've ever made miniature dollhouse furniture.
I want to make a handmade miniature dollhouse furniture S=1/12 crib.
• 手作りミニチュアドールハウス家具 S=1/1...
I want to make a 1/12 scale mosaic tile table.
• 手作りミニチュアドールハウス家具 厚紙でタイ...
Пікірлер: 21
For someone who doesn't say a word in your videos, you give great instructions and tips. Thanks.
@nanikatsukuritaihito
9 ай бұрын
I appreciate you saying that. I would love to be able to give tips to those who watch it.🤗✨
Just amazing talent! I would love it if you could create a room adding to it piece by beautiful piece!
@nanikatsukuritaihito
2 жыл бұрын
どうもありがとうございます!お部屋作りは今後やってみたいと思っていますので、また楽しみして頂けると嬉しいです。
扉の開閉仕組みの作り方、勉強になりました!
@nanikatsukuritaihito
3 жыл бұрын
そう言って頂けて嬉しいです^^どうもありがとうございます☺
素晴らしい🤩
@nanikatsukuritaihito
2 жыл бұрын
ありがとうございます!☺
アンティークなガラスの表現をレジンでするなんてすごい思いつきですね めちゃくちゃ参考になります!
@nanikatsukuritaihito
3 жыл бұрын
ありがとうございます(^^)レジンて万能調味料みたいに色々使えて便利です笑
Beautiful thanks ❤️ it
@nanikatsukuritaihito
Жыл бұрын
Thank you very much.😊✨
すりガラスのようなものを作るのに 今まで木工ボンド使ってました。レジン❗なるほど~‼️ありがとうございます❤️
@nanikatsukuritaihito
2 жыл бұрын
木工ボンド使用に私もなるほど!となりました✨ボンドが乾燥した感じは確かにすりガラスっぽいですよね。ありがとうございます😊
Beautiful. I would love to make these miniatures with you... could you please supply us with a cut list with meaurements in yor videos?
@nanikatsukuritaihito
Жыл бұрын
Thank you very much. We apologize for not keeping a list of the exact dimensions of the wooden furniture we have produced so far. We are considering including a list of dimensions in future videos we produce.
細かくカットされて凄いですね! 木材をカットする時に使っている、シルバーの機材?は何ですか? 良かったら教えて頂きたいです。
@nanikatsukuritaihito
3 жыл бұрын
マイターボックスといって、木材をまっすぐ切るためのノコギリガイドです^^ 小さめの木材を切る用(精密用)なのでミニチュア制作にはピッタリですよ。
@pupupumaru2467
3 жыл бұрын
@@nanikatsukuritaihito ありがとうございます😊こんなものがあるんだ!と感心して見ておりましたー!私もぜひ購入して、この動画を参考に何か作れたら良いなぁと思っています♪
はじめまして。 ガラスの表現イイですね♪ でも扉の裏から貼り付けているだけだと開けた時にチョット・・・(-.-;) ガラスの厚み分の切り欠きを簡単に付けるには ガラス板の厚み05~07mmに合わせてホルダーから取り出したカッター刃の片面に紙かプラ板を貼り付けて貼り付けた面を下にして机上に置き、 その刃に扉になる材の小口を押し当てて材のほうを動かすと浮かせた刃の高さで切り込みを入れる事が出来ます。 材の裏面からも同じ工程をしてあげれば材の一方を四角く切り欠く事が出来ます♪ 刃を幾つか造っておくと再利用できますね♪ ちなみに金属軸は大きな文具屋さん行くと大きな書類クリップ売ってますんで200円前後で軸何10本も造れますしU字型のメッキ取っ手とかも造れますよ♪
@nanikatsukuritaihito
Жыл бұрын
はじめまして、アドバイスをくださりありがとうございます! まだまだ作り込みが甘くて、テキトーな性格が出てしまいます😅 金属類の扱い苦手で避けがちだったんですが、クリップ代用なら簡単そうですね🤗