Great video, good honest review. glad you like the bars.

These look a lot like my Hammerheads, love the style and love not having to relocate everything for a tbar feel. I didn't have to worry about LA Choppers powdercoat because I knew I was recoating them immediately. Great review!

@MeathedMoto

2 жыл бұрын

I agree. Got these before LA Choppers released their versions of the t-bar work around. Overall they're great bars and have loved them

I was trying to decide between these bars and the LA Choppers Hammerhead bars, I like the look of these much better without the points on the top like the hammerheads! I think you have made up my mind... Thanks for the video and info!

@MeathedMoto

2 жыл бұрын

I've loved mine since the day I got them. You'll enjoy them too I'm sure!

Thank u for the information..these are exactly what I was looking for. Can't wait til they come! I didn't quite wanna do T bars..but not quite aps either.! And I didn't wanna go to tall...and I hate the skinny bars. So thanks again buddy.

@MeathedMoto

4 жыл бұрын

I found they were a nice middle ground for the ease of install like most ape hangers are for Road Glides with the control and leverage of a Tbar

@torion29able

3 жыл бұрын

Meathed_Moto they look real comfy and sporty. Can't wait til mine come in the mail.

Great looking bars! Can't wait to get mine in black. I'm currently on week 6 and still waiting for them to be shipped. That's the inly things that sucks.

@MeathedMoto

2 жыл бұрын

That was my only complaint. Being they are made to order is a drag but the quality is top notch. All the edges and powder coating is flawless. They haven't faded to much either in the two years I've had them now

Awesome video

I have mine but waiting to install with new mirrors, grips, clutch/brake controls.

Awesome vid bro, ride safe😎

@MeathedMoto

4 жыл бұрын

Appreciate the feedback. You ride safe as well

Buddy .. I like the Bars, can you show some slow speed skills with those Bars .. Figure 8's - U-Turn etc..

Just got my bars in, can’t wait to install them on my Road Glide. Do you like the mirrors mounted that way and can you see threw them good? Thanks for the awesome video

@MeathedMoto

4 жыл бұрын

I needed them put down that way because the 14" windshield comes back too far to have them up. I see just fine with them down and really the style choice is nice. My bars are also only 12" so the mirrors are pretty low to see under my elbows.

Do you ride long distance if so are they comfortable?

I ordered mine seven weeks ago, they haven't even shipped yet. But I'm still stoked about them because I just got to Va. and i'm not seeing anything out here like these 🙌🏽🙌🏽🙌🏽 But the price has gone up since this video was released, they're $425 now plus $50 in shipping totaling $475.

@MeathedMoto

2 жыл бұрын

Yeah I'm sure it's a result of the supply issues going on now. Sorry to hear about the wait but they are amazing bars. High quality and extremely well built

@krayziesoulja5829

2 жыл бұрын

You get your bars yet? I just put in an order an hour ago... they said lead time was 3 weeks. Just curious about a realistic time

@Sul33

2 жыл бұрын

@@krayziesoulja5829 Yeah I got my bars, 7 1/2 weeks.. Install was a pain, but I got it done in a night. Make sure you have a solid plan on how you're gonna pull the cables through.. I used WD-40 to help me out 🙆🏽‍♂️🙆🏽‍♂️🙆🏽‍♂️🙆🏽‍♂️

I like them 👍, are those mirrors the orinal just inverted? Can you open the small storages without problem ?

@MeathedMoto

3 жыл бұрын

They are the original mirror just inverted. There is some minor problems opening the compartments

I love the bars! Looks great,,, I’m 5’7”,,, any advice,, think before I order em,, fitment? Thanks!

@MeathedMoto

Жыл бұрын

First you can go up to 14" rise without replacing lines or extending cables to start. If you want your hands a little bit higher than shoulder height I'd say if you're 5'7" the 12 inch rise would be perfect for ya. I'm 5'11-6'0 depending on shoes so my hands sit below my shoulders with these bars.

Just got mine installed and wanted to know if or how you re-routed the clutch cable? I’m on a 22 RGST and the way the clutch cable is routed through the gauge pod is just not working. Can’t wait to ride with these bars.

@MeathedMoto

10 ай бұрын

Couldn't tell you as I have an 18 with a hydraulic clutch. So idk how your clutch cable is routed. I didn't have any issues with cables or rerouting them to make them work

do you think the 16in would be to big on a 2020 road king special..im 5'9 with longer than average arms. I have a stock seat but plan on getting a new one.

@MeathedMoto

3 жыл бұрын

Youd have to up get longer cables and probably a different riser I'm not sure how wide the upper riser is on the Road Kings

Did you mount your mirrors in reverse by choice or were they contacting the shield? And what brand / height shield are you running? TIA.

@MeathedMoto

3 жыл бұрын

Im my latest video I explain why they were upside down and why they are not anymore. It was the shield

I’m really digging bro, mind you this was a year ago and now 2021 it’s already $379 :-/ and are they 1 1/2 size wise ?

@MeathedMoto

2 жыл бұрын

Yes and yes. They probably went up due to material cost.

Mirrors??? I like! Please provide information on?

@MeathedMoto

2 жыл бұрын

They are the stock Harley mirrors I just flipped them upside down. Right side mirror goes under on the left side, left side goes under on the right.

Been looking for bars that are not wide but dont like the way T-bars block the gauges. Im 5’5” on a SGS. These may have just moves to the top of my list.

@MeathedMoto

4 жыл бұрын

These won't work on a street glide but i believe they have a bar setup for the modern street glides that are tbar like. Hope that helps

@MeathedMoto

4 жыл бұрын

www.bmcmc.com/collections/parts/products/copy-of-bmc-vindikta-hoop-teeze-custom-road-glide-handlebars

@patri0tiii766

4 жыл бұрын

Thank you. Much appreciated.

Just curious, are you able to see the Voltmeter and Fuel gauges?--thanks for sharing

@MeathedMoto

Жыл бұрын

Yes I am

I hate my 24 RG Ltd stock bars. Just bought it last week. Need new bars. This is a good review. Are you still running these bars?

@MeathedMoto

2 ай бұрын

I'm no longer riding the Road Glide but I was still using these bars when I sold it

Did you have any problems with speed wobbles? I have mine pushed all the way forward.

@MeathedMoto

9 ай бұрын

No I'd say you might have another issue

Can you see your turn signal indicators and fuel gauge with the hoop?

@MeathedMoto

Жыл бұрын

Yes I can

Can you run heated grips with them?

@MeathedMoto

3 жыл бұрын

I'm pretty sure you could wire them up to run heated grips. They have a larger internal diameter than stock Harley bars

Did you use an aftermarket riser or bushings?

@MeathedMoto

Жыл бұрын

Aftermarket bushings only.

Why was that yellow light flashing on your tach gadget in the video?

@MeathedMoto

2 жыл бұрын

It's just the frame rate of the camera makes the cruise control light look like it's flashing but it's not

Has anyone installed the 14” bars and if so did you need to extend the cable?

@MeathedMoto

4 жыл бұрын

Bmc has the details of what bars heights need what cables

@3rdgearmoto

4 жыл бұрын

Meathed_Moto Thanks dude, appreciate it!

@ballzadventures4327

3 жыл бұрын

What about for someone 5’2”??? I was gonna get the LA Choppers Hammerhead bars but have also looked at these in the 12”.

Thanks

@MeathedMoto

3 жыл бұрын

No problem man 🤘

Brother I have a question … I just ordered these on a 14’’ and I’m 5.11’’ I’m nervous and was really debating between the 12s or 14s. Would y;u have preferred the 14? Thank you!

@MeathedMoto

4 жыл бұрын

Im 6'0 and can go either way. If get a thicker seat like a saddlemen youll appreciate having the 14s

@pabloarroyo2004

4 жыл бұрын

Meathed_Moto that’s great to know because I’m ordering a mustang seat so that will work than. I’m also going to install these my self, first time 🤞🏼 thank you for your reply.

@MeathedMoto

4 жыл бұрын

Its a pretty easy install versus a bar/riser setup. Just take your time and you'll do fine man!

@pabloarroyo2004

4 жыл бұрын

Meathed_Moto i will. Thanks pal!

@pabloarroyo2004

4 жыл бұрын

Meathed_Moto brother one last question. As I mentioned earlier I order the 14’’. Do you think I have enough slack on the cables for the 14’’ or should I be proactive and order extensions for the lines? Everything I’ve found said I can fit 16’’ on stock cables but that doesn’t seem realistic. Thought 💭?

What's the circumstance of the bars? 1.5inch?

@MeathedMoto

2 жыл бұрын

Yes

Any pinching in the shoulders / base of the neck on long rides?

@MeathedMoto

Жыл бұрын

No not really for me

@johnpitt1011

Жыл бұрын

Are you still running them and liking them? Cause with shipping they are up to $475.

How tall are you? Do you wish you would have went with 14 inch bars?

@MeathedMoto

4 жыл бұрын

In some aspects yes. Im 6 foot even so the 14 inch would be a bit nicer for me but I've got no complaints about the 12s.

@aaronhaas4270

4 жыл бұрын

@@MeathedMoto thanks for the input. I've been eyeing those bars since I bought my glide.

Are these the 12' or 14? And how tall are you?

@MeathedMoto

2 ай бұрын

They were 12"

What gloves are those?

@MeathedMoto

4 жыл бұрын

They are an ICON glove. Wife bought them so idk what style it is

Nice bars.

@MeathedMoto

4 жыл бұрын

Thank you! I think i should've done the review off the bike but it's a bit easier this way to see the positioning

@asoshkin

4 жыл бұрын

@@MeathedMoto I think it's fine since it is a motovlog. Maybe you could of jumped off the bike for a quick view of how they look from a different perspective.

You still have them? Do u like them? I am 5’11 … 12” is okay for me?

@MeathedMoto

Жыл бұрын

I'm 5'11 actually as well and yes I still run them and yes they are comfortable for me and have no real plans to swap

@user-vw7qe1cf9x

Жыл бұрын

aside: Im 5'9 and run the 12-inch vindikta... very comfy and has far more control than stock bars. I hope this helps.

Not sure if its been mentioned but these are not BMC bars, they are Vindikta's and yes they are custom made, so much so, that you can call them or email them and they will modify any of their existing products to your liking.

What mirrors are those?

@MeathedMoto

Жыл бұрын

They are actually the stock mirrors flipped down. The right had side goes under the left side and vice versa

On a scale of 1 to motherfu$&! How hard is it to pull the wiring thru those odd bends? I have heated grips so would have the extra wire for them.

@MeathedMoto

3 жыл бұрын

Its probably a 7. Its not easy thats for sure but the bars pretty well open on the inside with minimal rough edges

I ordered these for my Club style RKS special before I crashed it My buddy put them on his roadglide and says they’re amazing!!

@MeathedMoto

4 жыл бұрын

They are worth every penny

@user-vw7qe1cf9x

3 жыл бұрын

Can I ask what size bars and how tall is he?

@MeathedMoto

3 жыл бұрын

These are 12" rise and I'm 6'0

Would it be possible for you to take side pic of the bike and with you sitting on it? I am interested in the crook of your arms.

@MeathedMoto

3 жыл бұрын

Sure hmu on IG and I'll model it for ya

14 or 12

@MeathedMoto

3 жыл бұрын

12

t