This was an awesome instructional video, thank you! I have been wondering how to paint them to get them accurate, but now I know! I'd like to be considered for the side panels. I had a prop business that I ran with a friend, but ended up getting ripped off to the tune of about 10,000, and I lost a friend! He's very successful now, I guess I don't understand how bad people keep prospering. I ordered some resin ones through eBay and they arrived broken and not at all as described. I wasn't able to get a refund for them, so now they're just sitting in my shop collecting dust. If I am consisted for the give away, it would sure be a breath of fresh air for the stroke or bad luck I've been having with prop building!

@DaBuild

Жыл бұрын

My friend, you are definitely in...I m really sorry to hear about your story...😔 Not cool...I wish you the best of luck and thanks for watching!

@davidlabeaute6072

Жыл бұрын

That sounds like a potential winner!

@DaBuild

Жыл бұрын

YOU ARE THE WINNER! Contact me on my personal mail to give me your infos. daniel.lupien@outlook.com

@originblueorion

Жыл бұрын

@@DaBuild Holy smokes! Thank you so much! It's been a rough road doing prop stuff with the experience I've been having, so this is so amazing! Thank you again, I cannot tell you how grateful I am and how perfect this timing was.

I cant wait for this!

@DaBuild

Жыл бұрын

cheers!

@JacobHGamez

Жыл бұрын

Thanks

By the way, for those who would like a cast similar to the one I used, check this one on Etsy: www.etsy.com/uk/listing/659447892/han-in-carbonite-castkit?ref=share_v4_lx

Beautiful!!!

@DaBuild

7 күн бұрын

Thank you!

Looks excellent, well done ATB

@DaBuild

9 ай бұрын

Thanks again! Much appreciated 🙂

Congrats to @BlueOrion! You are the winner of the giveaway! 🎉

This is one of the greatest things I’ve ever seen, what a fantastic job, well done, definitely liking and subscribing to see more great projects

@DaBuild

20 күн бұрын

Much appreciated Darth Synyster! Welcome aboard! Cheers 🎉

Love it.

@DaBuild

Жыл бұрын

Cheers Sacha! Thanks for watching! 🙃

Best idea ever

@DaBuild

Жыл бұрын

Cheers! 🙃

I just finished a few weeks ago my full size solo in carbonite, but made mine with the lights and side panels. You had a GREAT idea with this. From one maker to another, you do excellent work.

@DaBuild

Жыл бұрын

Cheers buddy! I might update it someday with the electronic panel...I feel cheap now 😁 Thanks for watching!

@wizardtowergames

Жыл бұрын

@@DaBuild sent ya an email just now with a link to my tiktok where I post my stuff. I would love your opinion, one creator to another.

My son and I are huge Star Wars fans. Would love to work on this project with him. Thanks for the inspiration!

@DaBuild

Жыл бұрын

Best reason in the world! Sharing that with your kid....You're in the draw!

Oh Man!!! So Amazing!!

@DaBuild

Жыл бұрын

Cheers Tommy! Very glad you liked it :)

You are just crazy Dan... Amazing result. First time I see the dry brushing technique used at this scale!!!! haha!! Awesome work!

@DaBuild

Жыл бұрын

Merci Sylvain! et merci d'avoir regardé. Cheers!

Turned out great brother!

@DaBuild

Жыл бұрын

Much appreciated Matt! Thanks for watching 🙃

My dream build. I love the star wars music you chose for this

@DaBuild

Жыл бұрын

The music is pretty epic!

@josephcranmer5930

Жыл бұрын

Its the music used in the trailer for the last film i believe. Where did you get the parts for this?

@DaBuild

Жыл бұрын

@@josephcranmer5930 Bought it from a guy on the RPF platform :) otherwise, you may find similar on Etsy. Cheers!

Yes! I've been wanting to do build a HIC forever, but the space issue is real. I love the idea of using it on a door! Thanks for the inspiration.

@DaBuild

10 ай бұрын

My pleasure! And thanks for watching!

I need this for my workshop! Would make such a great conversation piece. Thanks for sharing the idea and process!

@DaBuild

Жыл бұрын

Cheers Lucas! You're in!

Oh wow! Great job and ingenious idea to boot!

@DaBuild

Жыл бұрын

Much appreciated Ken! And thanks for watching! Cheers!

Thanks for posting, this is exactly what I was thinking for my office. Your tutorial will definitely help this process!

@DaBuild

Жыл бұрын

Glad it helps! Would you like to be in for the giveaway?

@hebisdavproduction6963

Жыл бұрын

@@DaBuild Yes, please!

@DaBuild

Жыл бұрын

@@hebisdavproduction6963 You're in!

Nice build, man! I think the pragmatic approach really paid off.

@DaBuild

Жыл бұрын

Thanks Constantin! And thanks for watching ☺

Excellent!

@DaBuild

2 ай бұрын

Cheers!

Oh yeah, excellent work by the way!

@DaBuild

Жыл бұрын

Thanks a bunch! And thanks for watching 🙃

Amazing work Dan! Well done! 😁

@DaBuild

Жыл бұрын

Thank you! 😁

Would be perfect for my refrigerator build!

@DaBuild

Жыл бұрын

Indeed it would! You're in!

Been a star wars fan all my life especially The Empire Strikes Back and this has been a dream prop of mine to build. Would love a chance at 3d panels. The music is awesome as well

@DaBuild

Жыл бұрын

Well Joseph, you're in! and thanks for watching 😃

Super cool idea!

@DaBuild

Жыл бұрын

Cheers!

Awesome need one for the game room.

@DaBuild

Жыл бұрын

Cheers! You're in! Thanks for watching!

Amazing work!! It would be soo cool to have this in my star wars hobby/mancave for me and my two sons!🙌

@DaBuild

Жыл бұрын

Oh yeah! You're in! Thanks for watching ☺

Beautiful work!! Every Star Wars fan would love to have that!!! Pick me please🙏

@DaBuild

Жыл бұрын

Of course! Much appreciated :) You're in for the draw!

Fantastic work. I would appreciate being considered for the giveaway as I love the side pieces and I already have the Han solo for my door conversion but also wanted to add the sides to the frame but do not have them. Ours will be to a spare bedroom so the door will not be open too much and so I dont think they will get in our way.

@DaBuild

Жыл бұрын

Scott, you are definitely in! Let me know of you have any question. Cheers!

Looks great, inspiration to do one of these.

@DaBuild

Жыл бұрын

I'm super glad it does! Cheers!

Well! You know me! C’est probablement ma pièce préférée dans tout ce que tu fais! 🤩 Great work!

@DaBuild

Жыл бұрын

merci Dave!

really cool i might do this idea on my shop door after i get done with life size R2 i already have my costume of Boba Fett on a manican

@DaBuild

3 ай бұрын

Thanks Steven! I wish I had the time and patience to build my own R2D2! Cheers

VRAIMENT COOL ! Je suis jaloux 🥺....

@DaBuild

Жыл бұрын

Merci Pascal! Tu vas pouvoir le voir live si tu veux!

I would like ti do a Solo on Carbonite 1:1 lamp for my son room. As separated family this Will make his room very appreciated. We are all star wars fan. I known this Will make him very Happy.

@DaBuild

Жыл бұрын

Damn good reason! You're in! Thanks for watching 🙃

That is awesome! I'm working on a small room in the house now for my Star Wars collection wanting to finish the walls with a theme to match, and making this door would be the finishing touch I just dont have a 3D printer so making those parts wouldn't be an option right now to get the full detail of the carbonite block. Well done, the amount of detail is unreal!

@DaBuild

Жыл бұрын

Amazing! You're in and thank you for watching! Much appreciated 🙃

Great stuff , once again , good works, well done …

@DaBuild

Жыл бұрын

Merci Stevy!

Amazing!

@DaBuild

Жыл бұрын

Cheers!

Nice work! 👍🏻

@DaBuild

Жыл бұрын

Much appreciated Edie and thanks for watching ☺

@ediesedgwick4462

Жыл бұрын

@@DaBuild My pleasure. 🤗

My family is a huge Starwars fan base (from my wife to my grand babies), we have a game room I would love to make the entrance a Han Solo in Carbonite to be a unique entrance. Thanks so much

@DaBuild

Жыл бұрын

Pretty good reason! Entered!

I would give my left kidney for a door like this one in my house! Well done!

@DaBuild

Жыл бұрын

Do it!

Nice Work 👌

@DaBuild

Жыл бұрын

Cheers!

As always Dan, amazing work. Bravo and keep up the really cool videos. Pas besoin de m’ajouter au tirage, je fais juste t’encourager - Joe

@DaBuild

Жыл бұрын

Merci Jo! Super apprécié! 😁

Thats cool amazing

@DaBuild

Жыл бұрын

Cheers! Thanks for watching!🙃

Hello Master DaBuild ! I need it because you did it ! And my kid would love it ! ( Haikü du jour ...) Très cool encore une fois, Bravo !

@DaBuild

Жыл бұрын

Merci Jp! You're in!

I need them to finish my project

@DaBuild

Жыл бұрын

You're in the draw sir!

This looks awesome. I don't think it was worth the trouble on some of the initial sanding passes but a wonderful finished piece none the less.

@DaBuild

Жыл бұрын

Cheers Wayne! You might be right but we never sand too much...well, yes, we do. 🙃🙃🙃

@DaBuild

Жыл бұрын

But all kidding aside, the first pass was for the boddy filler. This is hard as stone once dry. The sander is required. The paper sanding was only for the touch up. Cheers!

Wow looks Great I always wanted to buy one watching your video I’m inspired to build one would be great to have the your extra parts for my project. Thanks

@DaBuild

Жыл бұрын

Amazing! You're in and thanks for your support!

I have an area in my house that would make a good “Saferoom” for my wife and kids to hide in if ever there were to be a home invasion while I’m away. I originally was going to cover the door with a fake bookcase but I’ve decided to cover it with a Han Solo in carbonite. I would love to win your 3D printed side panel parts but if I don’t win, would you consider making some more and letting me purchase them? Thanks so much! FYI, your Han turned out awesome!!

@DaBuild

Жыл бұрын

Thanks for your comment! Sadly, the giveaway was october 24th...🥲

I saw a G4 tv special where Olivia Munn had castings done of her face and body to make a similar deal. Framed it up and used 5 gallons of Elmers glue to make the surrounding “Carbonite”. Painted it up much like you did and hung it on the wall. Makes me want to do this as the molds of Harrison Ford are $250 minimum.

@DaBuild

Жыл бұрын

You should! It's well worth it if you ask me :) Cheers!

I enjoyed watching your build. I would like to be entered in your give a way. I am getting ready to start the build. I have the cast already. I do not own a 3D printer to make the side controls. I will be concealing a doorway with my Han in Carbonite Block. Thank you for your consideration.

@DaBuild

Жыл бұрын

Thanks Rick! Best of luck! Your name is in the hat! cheers! Dan

Gran trabajo , he visto muchos y me quedo con ese, donde buscaste las cajas que van en los laterales que no pusiste?

@DaBuild

Жыл бұрын

¡Gracias! Simplemente busqué el modelo 3D Han Solo Carbonite gratis en la web. ¡Hay muchos de ellos!

Very cool!!! If I were to try this… where would I go to get the Han Solo pieces?

@DaBuild

Жыл бұрын

Thanks Jeffrey! Not the exact one as I used but, check this one on Etsy: www.etsy.com/uk/listing/659447892/han-in-carbonite-castkit?ref=share_v4_lx

@jeffreybosiljevac3408

Жыл бұрын

@@DaBuild thank you!!!

@DaBuild

Жыл бұрын

@@jeffreybosiljevac3408 cheers!

That's so cool. How do u get the mold of the rough cast of Hon solo??

@DaBuild

Жыл бұрын

I got it from someone on the RPF platform. Otherwise, I already commented on where you could get a similar mold on Etsy. Check it out :) Cheers!

We are googling Solo carbonite molding after this...

@DaBuild

Жыл бұрын

As you should! Merci Tobie!

Today is my son’s 23rd birthday and he has been amazing and quit school after having complications do to needing to stay home and help take care of me and has been collecting sw since he was 5 and I would luv to do a barn door for his closet but on disability and limited on funds so can u help with a print out or info for someday when we finally save for 3D printer, also please how can i get the mold for carbonate ?? Thx n God Bless

@DaBuild

Жыл бұрын

Hello Carmen! I am sorry to hear about your son...sadly, the giveaway was done few months ago. I wish you all the best to you and your son. Cheers

@carmenvargas-zayas8868

Жыл бұрын

@@DaBuild thx so so much, sorry for the inconvenience and God Bless you and yours

@DaBuild

Жыл бұрын

@@carmenvargas-zayas8868 No inconvenience at all! Take care!

Where would a muggle get casts like those?!

@DaBuild

Жыл бұрын

It's in the description my friend! Cheers!

Nice idea and execution ; by now u give away those command enclosure ,so u can print 3 more for yourself : 1 in vertical ,up , wright side of Solo , second opposite side but horizontally , and the third ,vertically under left hand ; with lighting sequences for the gizmos ( SI-FI !!! another form for carbonite conservation) . Better then no light effects ,and u child can damage "parafarnalia " . JUST IDEA , DO NOT BE MAD ON ME ! ....... MORE : optic fiber , with visible light conduction in all length , in enclosure with LED multicolour ( not with IC) , in 2 or 3 point ,made some electric arcs effect ......

@DaBuild

11 ай бұрын

That's actually a pretty good idea and quite simple! Thanks a bunch!

@romeoaurelianvieru9288

11 ай бұрын

@@DaBuild nice to be useful

@romeoaurelianvieru9288

11 ай бұрын

I mean GLAD to be useful

@DaBuild

11 ай бұрын

@@romeoaurelianvieru9288 Oh yeah! 😁

👌

@DaBuild

Жыл бұрын

Thanks a lot for watching Ed! Cheers!

where did you get the light up top?

@DaBuild

5 ай бұрын

Amazon buddy: search for ''Wireless Picture Lights''

Where did you get the resin caps of Solo

@DaBuild

Жыл бұрын

Hey there! Check the comments. I put a link to a similar one. Cheers!

Where did you get solo cast???

@DaBuild

Жыл бұрын

Hey Chris! I got it from a guy on the RPF platform but I put a link to a similar one in the comments. Thanks for watching! Cheers! ☺

where did you get the Han Solo parts?

@DaBuild

Күн бұрын

I left a comment below 👇 with the link

You didn’t make the cast. What’s the point in creating a how to? 🤦‍♂️

@DaBuild

10 ай бұрын

To help you do the rest. The cast can be bought anywhere. Link in the description if you need one. Cheers.

I can smell the filler! 😅

@DaBuild

Жыл бұрын

Oh yeah!🙃

Where did you get the han mold?

@DaBuild

Жыл бұрын

Hello Greg, I bought from someone on the RPF platform but, you may get one on Etsy. Link in the description. Cheers!