Great way to start my Sunday morning. I’m going to consider topping this on top of my exo and crystal. loved the video as always!

@STATUSDETAIL

2 жыл бұрын

It works really well on top of csl or exo 👍👍 As I mentioned in the video this is best used when your looking to relax and spend some time with your car. If time is tight then grab cure or wetcoat.

Looks like some great stuff! The gloss on that car, 🔥.

@STATUSDETAIL

2 жыл бұрын

The smell... Really fantastic lol

great video once again!

@STATUSDETAIL

Жыл бұрын

Thanks!

Hello it's a pleasure to watch your videos this Gyeon Wax product is really amazing this Porsche GT3 RS really deserves the best care it's very beautiful. greetings from Slovenia😊

@STATUSDETAIL

6 ай бұрын

Hello. Thanks for watching 🙂👍

Since I do almost exclusively older classic cars I always use a paste wax...carnauba. I will put this on my wish list. Thanks.

@STATUSDETAIL

2 жыл бұрын

I'd say this product is basically custom tailored for a customer like yourself 👍

I am a huge car wax fan and have some very good waxes but I do like this Gyeon wax for water behaviour and I do have a bottle of cure bought for my Mini JCW that I had two staged and Mohs applied that I sold 2 weeks later and bought a Jaguar. Long story that I won't go into. I have not opened the Cure but I will be following your process going forward so thanks for the tip. I liked and subscribed and that is a stunning car you were working on and I am not a Porsche fan but I do appreciate stunning cars.

@STATUSDETAIL

3 ай бұрын

Thanks for watching! New video out tomorrow 🙂

Thank you😊

@STATUSDETAIL

10 ай бұрын

👍

Thank you! I would like to ask how many months does the protection of the gyeon wax last?

@STATUSDETAIL

Жыл бұрын

I can't remember if they lost a actually durability on this product. I'd say a few months. This is about gloss and water beading.

I got this product from you and I am going to be doing my car this week. Really looking forward to the experience.

@STATUSDETAIL

Жыл бұрын

Q2 wax really is a cool product. It gives you the nostalgia of using a wax and the installation process. But it's infused with fluorine and stupidity ridiculously hydrophobic lol. Gloss is off the charts too. It's a incredible topper for existing ceramic too. Enjoy and thanks for shopping with Status 🙂🤝

@charles-antoinelapierre7167

18 күн бұрын

@@STATUSDETAILwould you recommend to apply Q2 Wax on top of Gyeon Pure Evo 14 days after Pure application? I already have a brand new Q2 Wax in my arsenal and I would like to protect my coating and also have more slickness. Thank you!

@STATUSDETAIL

18 күн бұрын

@@charles-antoinelapierre7167 that definitely works 🤝👍👍

@charles-antoinelapierre7167

17 күн бұрын

@@STATUSDETAIL alright thank you! What do you think is the best to apply on top of Pure, Q2 Wax or Cure? Which one is the slicker?

@STATUSDETAIL

16 күн бұрын

@@charles-antoinelapierre7167 different products. Cure is more of fast maintenance. Wax Is more a once every months thing. Technically you can do wax then cure. If you only buy one. Buy cure. It's more versatile

Love your detailing videos, especially the ones showcasing gorgeous sports cars! Kinda freaking out right now cuz my detailer is recommending CarPro Essence primer, Gyeon Pure Evo, and this Q2 Wax topper. What’s so egregious about Pure Evo??!! Need to know before install this Friday. Thanks!

@STATUSDETAIL

3 ай бұрын

Many detailers will have personal preferences towards brands and types of ceramic. It doesn't always necessarily mean one is better or worse. Gyeon professional ceramic I believe to be pretty good. Gyeon pure is more of a prosumer product. I don't love the installation of pure. Id prefer mohs evo. But I don't love mohs either. I'm a firm believer gtechniq Crystal serum light is one of the best ceramic coatings ever made and exo v5 is the best ceramic topper available currently... No contest on exo. V4 was great. V5 is shockingly even better. CSL and exo will last longer as well. Q2 wax is nice. But durability isn't amazing. However it will bead water like nuts. Id throw that on your csl exo. Ever year or 6 months or whatever you like really. Thanks for watching my videos 🤝

@2toniq

3 ай бұрын

@@STATUSDETAIL Thanks for the insight! So besides the difficulty of Pure installation (which my detailer will do), are there any other reasons that you think it would be "awful" for me, the car owner? Also, installation will be outdoors under a canopy if that factors into the equation. I do park outside 24/7. Durability of Pure is up to 3 years which is comparable to single layer CSL, but with more of a candy gloss which appeals to me. EXO V5 is an amazing durable sacrificial layer, but doesn't Q2 Wax or Wet Coat on top of Pure give more flexibility in case of water spots, etchings, etc? Wax on top of EXO sounds like overkill?

@STATUSDETAIL

3 ай бұрын

@@2toniq gyeon I think says outdoor installations are possible. I would definitely personally not try and do a ceramic coating outside. But that's just me And my opinion. It is possible just difficult. Q2 wax and WetCoat are more like weekly and every couple months maintenance. Exo is more like an annual or every two-year maintenance. The bottom line is EXO is a real ceramic coating. Q2 wax is definitely not "real ceramic"

@2toniq

2 ай бұрын

@@STATUSDETAIL So I went with Gyeon Pure and CanCoat EVO and am addicted to the hydrophobics! First time I've enjoyed drying a car, especially with my Makita blower complete with stubby nozzle. Gonna dip my toes into light paint correction on an older car. Looking for a durable, easy to install ceramic protectant. Leaning towards CanCoat or would you recommend Gyeon Wax as more idiot proof. How are the hydrophobics and appearance of the Wax compared to CanCoat?

@STATUSDETAIL

2 ай бұрын

@@2toniq can coat is good but can be difficult to apply. You have to be very careful of overspray. Something like wet coat and cure are great for fast maintenance

Wow, one year already since posted. I ordered it recently and wanted to give it chance. I used it the traditional way, removed any protection and put this wax on my plain piano black 991.2 4S. The hydrophobic reaction is absolutely insane, the absolute best I ever experienced as a weekend warrior level for many years. I was lazy, I regret I didn't put a layer of ceramic coating before. I see some very, very light haze though but I am very OCD. Not blaming the wax, it might be a bonding issue I created. It's very, very minor. Anyway, plain black is so difficult to treat.

@STATUSDETAIL

Жыл бұрын

Glad you liked it! Wax like this can definitely leave a bit of haze. It's tricky to remove sometimes ESPECIALLY on black paint

@phileas816

Жыл бұрын

@@STATUSDETAIL Great, I feel better now knowing it can occur. Again, it is very but very minor, but I don't get that with Ceramic coating. Any hint on how to remove the minuscule haze? If possible at all. Honestly I literally have to use my paint check lamp to see it lol but I can lose sleep over these things (OCD virus haha).

@STATUSDETAIL

Жыл бұрын

@@phileas816 I completely understand

Tried to buy some stuff like cure & q2 wax but in your store…. but you dont ship abroad correct?! 😖

@STATUSDETAIL

2 жыл бұрын

That's correct unfortunately! Really appreciate you shopping the status Store! Might be able to ship around the world one day but not currently! Very sorry :

An additional question I haven’t found an answer to involves using Carpro reset on top of gyeon wax. Is this ok? Will it degrade the wax or is it safe to wash with ? Thanks for taking the time to answer so many questions. I’ve watched many of your videos now and follow the comments if I run into questions. However I haven’t seen this question asked. Thx in advance!

@STATUSDETAIL

Жыл бұрын

It's a good question because reset makes it sound like it's going to strip everything and reset your car. The intention of that name is that it's resetting the car back to its previous condition of ceramic coating protection or sealant protection. So Car pro reset is safe on all cars with any kind of sealant or ceramic coating or Gyeon wax for example. It's actually going to clean all the stuff off your car and make it bead water like you just installed the wax! Reset can be slightly aggressive if you under dilute it. Basically if you put it in the foam cannon and it's like five or six oz. That's kind of a lot in my start to hit your sealant a tiny bit but that would not bother the ceramic coating still.

@chadgorges

Жыл бұрын

@@STATUSDETAIL awesome! and good to know. Thanks for the info as usual!

@STATUSDETAIL

Жыл бұрын

@@chadgorges happy to assist 👍👍🙂🙂

Nice video. You said in this video that the wax came with an applicator and a very nice microfiber towel that you used and that microfiber towel is no longer suitable for use. Why is that? It's wax, so we can wash the towel and reuse it. When is a microfiber towel no longer usable? I've been using the same towel again and again.

@STATUSDETAIL

2 жыл бұрын

I do suppose you can try and wash it. That didn't actually come to mind for some reason! In general the wax built up in the towel from doing multiple cars and just didn't remove the wax like you would want it too. Kind of like the microfibers got clogged with wax. On my first ever application I put wax to much wax in too so the towel got extra clogged up on removal. Obviously my fault. I have not tried to wash that towel before so it's possible it cleans up nicely. I have a million towels soo I'm never afraid to grab a new one to make sure I'm working with clean fresh stuff

@nasdoc1

2 жыл бұрын

@@STATUSDETAIL makes sense. I'm still too new so haven't experienced a microfiber towel getting clogged yet. I just have one car that I try to take care of with the limited resources that I have. I try my best.

@STATUSDETAIL

2 жыл бұрын

@@nasdoc1 gotcha. You can definitely reuse certain towels for certain things. But ceramic coating towels need to be thrown away usually. This isn't true ceramic tho so it's a partial mindset thing to me because it's like ceramic wax.

With what did you spray after q2 wax plse?

@STATUSDETAIL

2 жыл бұрын

Gyeon cure👍 Checkout statusdetailstore.com under exterior protection tab

does this car only have the wax or a coating underneath? gyeon recommended to use the quickdetailer (not the ceramic version) instead of cure on top of the wax. whats your opinion on that?

@STATUSDETAIL

2 жыл бұрын

That RS had mystery Ceramic from another company. It appeared to be In good health during the wash. The Customer is switching to us for maintenance and future large ceramic details so we are just going to make his current ceramic last as long as possible! Q2 wax works on ceramic coated surfaces and non ceramic coated surfaces. I believe it works a little better on previous ceramic as it is designed as a ceramic wax or topper for what's underneath. But you can't apply it wrong like traditional ceramic so it's a great intro product to ceramic based sealant for beginners. The ceramic detailer is brand new. Companies tend to recommend whatever is new for obvious reasons. You can use ceramic Detailer. (white) quick detailer (blue) or cure. All will help remove the leftover wax. Of the three cure adds the most depth and gloss. It also beads water the best and last the longest. It's also the most expensive. You can technically remove wax with water in a spray bottle. You just want lubrication and something to kinda soften it on removal 🙂👍

@zumpel1337

2 жыл бұрын

@@STATUSDETAIL thanks for your answer. interesting would be video about comparing the gloss and beading of the wax once with and once without cure on top. im looking for a new wax for my non coated car and have seen comparisons of the gyeon wax to the neowax no 2. beading was the same, but neowax lasted much longer;) maybe of interest to you too..

@STATUSDETAIL

2 жыл бұрын

@@zumpel1337 my pleasure! I think gtechniq is about to release a new ceramic sealant. They are teasing it on social media. Very curious about that!

So if u have to wait 30min dose that mean u apply it to the hole car then wait 30min or do u have to do abit at a time

@STATUSDETAIL

25 күн бұрын

Depends on size if car. If it's a Escalade work sections. If it's a Miata just do everything

I just got a white 2019 gti and the paint is filthy filled with rough particles and those little orange spots that look like rust. I was planning on doing either Gyone restart or Car Pro iron x snow soap and then do a clay bar after. I don't want to do a ceramic coating but I like the hydrophobic effects of the q2 wax , would q2 wax be fine with going directly on my car with out a ceramic base would you recommend it? also do you have any videos on the process of starting over completly on a car that either does not have a ceramic coating or filthy clearcoat?

@STATUSDETAIL

Ай бұрын

Restart and iron x sound like a great idea. Clay too. Doing paint correction after will be a good idea as well. Clay can cause swirls and in general paint correction can remove contamination too. Hopefully the very minimal stuff left over after the other steps. Q2 wax works great after a process like this. Id grab WetCoat too for washes. Cure is handy too but I c2 from gtechniq a lot currently. Both are great

@keizeph4655

Ай бұрын

@@STATUSDETAIL thank you for your imput

So if I understand correctly, after I’ve waxed and say wash the car two weeks later it’s ok to apply cure ? I’ve ceramic coated my Jeep and after three weeks I did the first wash and then applied the gyeon wax. I enjoyed that process. Wanting to know now where cure will come into play in the future washes? Assuming I can use monthly or every couple months even with the wax on?

@STATUSDETAIL

2 жыл бұрын

To keep it simple you can apply cure is often as you like. So if you have free time just put it on if you enjoy putting it on put it on lol Cure is going to be an amazing maintenance product for Q2 wax for of ceramic coating or even to put on top of an old school sealant. It's basically spray wax on hardcore steroids

@chadgorges

2 жыл бұрын

@@STATUSDETAIL heat to hear. It can get a bit confusing trying to find out what can go over what these days. I’ve just found your channel and am enjoying your videos. Thanks for the quick response.

@chadgorges

2 жыл бұрын

Glad to hear was suppose to say. Damn phones these days.

@STATUSDETAIL

2 жыл бұрын

@@chadgorges my voice to text is awful too hahaha! Glad you found Status 🙂 I always try to respond fast!!! Be sure to check out my Instagram stories too! Awesome 992 turbo s video coming out this Sunday 👍

What's better Fusso Coat or that Gyeon? I have a problem with choose :D

@STATUSDETAIL

2 жыл бұрын

I have not used Fusso but am familiar with it and seen video's on it. Fusso might last longer. But I believe this will give better hydrophobics and should also be a easier installation

@mateusz7248

2 жыл бұрын

@@STATUSDETAIL installation fusso is hard, but shine looks great. I used it and 6 months holding on. Ehhh 😅

Should you apply only 1 coat of wax or multiple?

@STATUSDETAIL

Жыл бұрын

Multiple doesn't hurt 👍

Aloha, so you put it on a ceramic coating? I've heard conflicting arguments

@STATUSDETAIL

2 жыл бұрын

It can definitely be used as a stand alone protection product. It can absolutely be used on top of an existing ceramic coating like gyeon mohs EVO or Crystal serum light. I'd recommend putting this on as maintenance say 6 months intervals or 3 month intervals to help keep your ceramic base coat healthy. Adding Q2 wax on top of a ceramic coating is definitely not bad and I'm a little surprised that someone would have said something that would contradict putting a protection on top of another production. Just my opinion but Gyeon definitely recommends this too.

@kellygregg3688

2 жыл бұрын

@@STATUSDETAIL thanks, so you recommend gyeon cure afterwards? And why so?

@STATUSDETAIL

2 жыл бұрын

@@kellygregg3688 in my experience it just helps remove the left over q2 wax. Adding some lubricant to remove the residue just makes it come up easier and I'd rather use another ceramic based protection to do this than water. The two products play well together basically. Definitely optional step

Whit what did you spray after the q2 wax?

@STATUSDETAIL

2 жыл бұрын

That was gyeon cure!

@Tay-no8ci

2 жыл бұрын

@@STATUSDETAIL i am confused i thought you said you didnt like gyeon cure is it the cure that smells great?

@STATUSDETAIL

2 жыл бұрын

@@Tay-no8ci this product in the video is called gyeon q2 wax. It smells great. I also love gyeon cure and it doesn't have a good or bad smell and I don't believe any detailing chemical I use or sell actually smells bad besides iron x. Hope that helps clear things up👍

@Tay-no8ci

2 жыл бұрын

@@STATUSDETAIL thanks for responding. i have the stick wax but havent used it yet. i may have misheard you.

@STATUSDETAIL

2 жыл бұрын

@@Tay-no8ci you will definitely enjoy q2 wax. Be sure to apply it thin. 👍

Is it better Q2 wax or CanCoat over Gyeon Pure Evo?

@STATUSDETAIL

8 ай бұрын

Can coat would last longer. Q2 wax would likely pop more glossy and be more hydrophobic. But can cost would be glossy and hydrophobic and last the longest. Just be careful with can coat application. Spray into towel with towel close. Do not spray far away or near other cars or you could overspray and make big headaches

@bricc72

8 ай бұрын

@@STATUSDETAIL​​⁠ thanks for the quick reply! You gave me the answers I was looking for. I chose Cancoat, I'm old school and love wax but but I I like also change.

@STATUSDETAIL

8 ай бұрын

@@bricc72 glad I could help

u can do DA for better durability and its a fluorine u can also put this anyo ceramic coat already in anyo car*

@STATUSDETAIL

7 ай бұрын

i said that in the video.

@bm_wuratli6883

7 ай бұрын

@@STATUSDETAIL ah ok as much for me sorry im half deaf*

How was the durability?

@STATUSDETAIL

5 күн бұрын

@@carlloftin2850 pretty good but I'd use this for gloss and water beading. Traditional ceramic for durability

What if its a range rover sport

@adamtouma1753

25 күн бұрын

Sections meaning one side at a time

@STATUSDETAIL

25 күн бұрын

@@adamtouma1753 I could probably do the car in one shot. A new person trying for first time might do like half the car. It doesn't matter much. Nothing can really go wrong. If you apply it to heavy then it will dry and be pretty hard to remove

I've used hundreds of waxes, Q2 Wax is one of the best I've ever used, especially on removal. You've made the wax look awful in this video. You wouldn't put cure over a freshly applied wax.

@STATUSDETAIL

8 ай бұрын

This video was filmed awhile ago. But I agree if I remember correctly I put this on much to thick. Q2 wax is definitely super amazing