A brief Video showing my Saw setup for cutting miters.
Жүктеу.....
Пікірлер: 60
@Freedzx103 ай бұрын
very good I work with gutters in Brazil too good job
@danielsmith28812 жыл бұрын
Nice setup for sure.
@EarlyBirdArms2 жыл бұрын
Those metal shavings are nice for kids and dogs feet
@ULLOAE2 жыл бұрын
very nice man, thanks for sharing, we could bounce ideas sometime :)
@giuchici43 жыл бұрын
Also I’d like to see more of your videos. Maybe tutorial on install
@tysonyoder2560
3 жыл бұрын
Be sure to subscribe and click the bell. More videos soon to come.
@jeffreydaigle58272 жыл бұрын
Any way I can get plans how to make this or buy one .great job
@shawnmann15742 жыл бұрын
would you post a picture of the table for the miter box. or would you sell a drawing of how its made?
@gerardoramirez5435 Жыл бұрын
My friend what kind of rail you used to move the shop saw side to side please
@Shawn_fast Жыл бұрын
We do hand tab miters, Id imagine that it wouldnt work very well for that. I can see this being cool for strips!
@tysonyoder2560
Жыл бұрын
All i do is hand tabs. Why do you say it wouldn't work well?
@Shawn_fast
Жыл бұрын
@Tyson Yoder I guess you just cut you miters then hand cut tabs? also, do you double check you miter guage on the saw occasinally to ensure accuracy in the cut?
@tysonyoder2560
Жыл бұрын
@Shawn Horn ya I cut the tab. I make sure the back and bottom of the gutter is good with the saw. As long as those are good the cuts are accurate.
@PilgrimGutters
Ай бұрын
Why do yall still tab? It’s not 2004 anymore
@Shawn_fast
Ай бұрын
@@PilgrimGutters craftsmanship and quality
@fandeautoshop2 жыл бұрын
How much you think I can charge for doing one with your specs and without the machine
@KerkhovenRobert10 ай бұрын
Lookin to buy system. Can you share where we can get one?
@supercatforever3 жыл бұрын
Good set up. Can you cut at a 45 angle with it?
@tysonyoder2560
3 жыл бұрын
Yes. I can cut 45s with this setup.
@guillermoalonzo9547 Жыл бұрын
Come on lol😂 one house for day with that skills
@highqualityroofingrepairsa93682 жыл бұрын
What blade do you use
@jordanminiard223 жыл бұрын
What kind of blade are you using? Thanks
@tysonyoder2560
3 жыл бұрын
Evolution Aluminum 80 tooth
@kwgriffin4483 жыл бұрын
just bought ironman and 14 ft trailer when i mount to trailer how much room should i leave between door and machine so i can build that setup?
@tysonyoder2560
3 жыл бұрын
I would allow probably 6" from the shear to the door when closed.
@kwgriffin448
3 жыл бұрын
@@tysonyoder2560 ok i appreciate the quick response.
@stok33rd172 жыл бұрын
Not having Risers on your machine put stress on your back?... due to crouch a bit more...
@giuchici43 жыл бұрын
How did you build? Weld?
@tysonyoder2560
3 жыл бұрын
Yes I welded it.
@highqualityroofingrepairsa93682 жыл бұрын
Hey brother what blade are you using
@tysonyoder2560
2 жыл бұрын
I have been trying different ones to find which one works best and last longest. I haven’t came to a conclusion yet. 🤔
@islandgurl41233 жыл бұрын
Can you please tell me what size mitre saw you’re using
@tysonyoder2560
3 жыл бұрын
12" Double Compound Dewalt
@islandgurl4123
3 жыл бұрын
Thank you I appreciate you responding
@austinhedgeman4192
3 жыл бұрын
@@tysonyoder2560 for a 6 inch gutter right 12" is what you need?
@tysonyoder2560
3 жыл бұрын
@@austinhedgeman4192 Yes you will want a Double Compound 12" miter saw to cut 6".
@washingtonvisconde4163 Жыл бұрын
how much you charge me for make two miter saw holders for me?
@IRAfallon3 жыл бұрын
Do you prefer the saw over hand cutting?
@tysonyoder2560
3 жыл бұрын
If you have a saw setup definitely. I used strip miters for about 15 years and used a hacksaw to cut them.
@IRAfallon
3 жыл бұрын
Wow. Thanks for getting back to me. I'm new to the industry and starting my own business. Just trying to figure everything out. What are your thoughts on strip miters versus hand cut? Strip just seems like it would be so much faster and easier.
@tysonyoder2560
3 жыл бұрын
@@IRAfallon strip miters are a little bit faster but tabbed miters look neater if done correctly. I charge per miter, plus it's one less thing I have to worry about stocking.
@IRAfallon
3 жыл бұрын
Right on. Thanks so much.
@IRAfallon
3 жыл бұрын
Man I keep coming back to this video! I'm supposed to get my machine in 2 weeks and keep debating on installing a saw or not. Thoughts? Also I would love to see a quick vid on the details of you setup. I have a welder and could probably knock that out pretty quick, but I'm just not sure how you make the saw adjustable. Really appreciate your time. Thanks.
@joelengland842910 ай бұрын
Maybe you could make one and send it to me I’d love to make it myself but unfortunately I don’t have time or a welder
@nickfiner88313 жыл бұрын
I take it your a one man band
@tysonyoder2560
3 жыл бұрын
I picked up a young helper 2 days a week.
@dickfitswell10003 жыл бұрын
Price on a unit
@tysonyoder2560
3 жыл бұрын
I custom built it. Currently not forsale. Sorry.
@seamlesslygutters
3 жыл бұрын
@@tysonyoder2560 wanna sell the blueprints so I can make one for my trucks?
@tysonyoder2560
3 жыл бұрын
@@seamlesslygutters I just kinda made it as I went, so I don't really have any blueprints.
@jvirg
2 жыл бұрын
gutterrunner.ca sell a setup but they want like 3000 for it. I just stick with snips i can do so fast. Infact I don't even buy machines with a guillotine anymore.
@lavidanormalderay32963 жыл бұрын
Help me set up a trailer like yours bro.
@tysonyoder2560
3 жыл бұрын
I enjoy setting up trailers. It's kinda a stress reliever..😄
@lavidanormalderay3296
3 жыл бұрын
@@tysonyoder2560 I don’t have a machine yet but hopefully soon.
@Ole_Lige Жыл бұрын
That’s looks like a park, probably children running around with bare feet/metal shavings
@supermegadong75972 жыл бұрын
Not trying to be that guy but if you have a huge ass house with a lot of corners I’d say wear a mask that aluminum can be killer in the long term on the lungs
Пікірлер: 60
very good I work with gutters in Brazil too good job
Nice setup for sure.
Those metal shavings are nice for kids and dogs feet
very nice man, thanks for sharing, we could bounce ideas sometime :)
Also I’d like to see more of your videos. Maybe tutorial on install
@tysonyoder2560
3 жыл бұрын
Be sure to subscribe and click the bell. More videos soon to come.
Any way I can get plans how to make this or buy one .great job
would you post a picture of the table for the miter box. or would you sell a drawing of how its made?
My friend what kind of rail you used to move the shop saw side to side please
We do hand tab miters, Id imagine that it wouldnt work very well for that. I can see this being cool for strips!
@tysonyoder2560
Жыл бұрын
All i do is hand tabs. Why do you say it wouldn't work well?
@Shawn_fast
Жыл бұрын
@Tyson Yoder I guess you just cut you miters then hand cut tabs? also, do you double check you miter guage on the saw occasinally to ensure accuracy in the cut?
@tysonyoder2560
Жыл бұрын
@Shawn Horn ya I cut the tab. I make sure the back and bottom of the gutter is good with the saw. As long as those are good the cuts are accurate.
@PilgrimGutters
Ай бұрын
Why do yall still tab? It’s not 2004 anymore
@Shawn_fast
Ай бұрын
@@PilgrimGutters craftsmanship and quality
How much you think I can charge for doing one with your specs and without the machine
Lookin to buy system. Can you share where we can get one?
Good set up. Can you cut at a 45 angle with it?
@tysonyoder2560
3 жыл бұрын
Yes. I can cut 45s with this setup.
Come on lol😂 one house for day with that skills
What blade do you use
What kind of blade are you using? Thanks
@tysonyoder2560
3 жыл бұрын
Evolution Aluminum 80 tooth
just bought ironman and 14 ft trailer when i mount to trailer how much room should i leave between door and machine so i can build that setup?
@tysonyoder2560
3 жыл бұрын
I would allow probably 6" from the shear to the door when closed.
@kwgriffin448
3 жыл бұрын
@@tysonyoder2560 ok i appreciate the quick response.
Not having Risers on your machine put stress on your back?... due to crouch a bit more...
How did you build? Weld?
@tysonyoder2560
3 жыл бұрын
Yes I welded it.
Hey brother what blade are you using
@tysonyoder2560
2 жыл бұрын
I have been trying different ones to find which one works best and last longest. I haven’t came to a conclusion yet. 🤔
Can you please tell me what size mitre saw you’re using
@tysonyoder2560
3 жыл бұрын
12" Double Compound Dewalt
@islandgurl4123
3 жыл бұрын
Thank you I appreciate you responding
@austinhedgeman4192
3 жыл бұрын
@@tysonyoder2560 for a 6 inch gutter right 12" is what you need?
@tysonyoder2560
3 жыл бұрын
@@austinhedgeman4192 Yes you will want a Double Compound 12" miter saw to cut 6".
how much you charge me for make two miter saw holders for me?
Do you prefer the saw over hand cutting?
@tysonyoder2560
3 жыл бұрын
If you have a saw setup definitely. I used strip miters for about 15 years and used a hacksaw to cut them.
@IRAfallon
3 жыл бұрын
Wow. Thanks for getting back to me. I'm new to the industry and starting my own business. Just trying to figure everything out. What are your thoughts on strip miters versus hand cut? Strip just seems like it would be so much faster and easier.
@tysonyoder2560
3 жыл бұрын
@@IRAfallon strip miters are a little bit faster but tabbed miters look neater if done correctly. I charge per miter, plus it's one less thing I have to worry about stocking.
@IRAfallon
3 жыл бұрын
Right on. Thanks so much.
@IRAfallon
3 жыл бұрын
Man I keep coming back to this video! I'm supposed to get my machine in 2 weeks and keep debating on installing a saw or not. Thoughts? Also I would love to see a quick vid on the details of you setup. I have a welder and could probably knock that out pretty quick, but I'm just not sure how you make the saw adjustable. Really appreciate your time. Thanks.
Maybe you could make one and send it to me I’d love to make it myself but unfortunately I don’t have time or a welder
I take it your a one man band
@tysonyoder2560
3 жыл бұрын
I picked up a young helper 2 days a week.
Price on a unit
@tysonyoder2560
3 жыл бұрын
I custom built it. Currently not forsale. Sorry.
@seamlesslygutters
3 жыл бұрын
@@tysonyoder2560 wanna sell the blueprints so I can make one for my trucks?
@tysonyoder2560
3 жыл бұрын
@@seamlesslygutters I just kinda made it as I went, so I don't really have any blueprints.
@jvirg
2 жыл бұрын
gutterrunner.ca sell a setup but they want like 3000 for it. I just stick with snips i can do so fast. Infact I don't even buy machines with a guillotine anymore.
Help me set up a trailer like yours bro.
@tysonyoder2560
3 жыл бұрын
I enjoy setting up trailers. It's kinda a stress reliever..😄
@lavidanormalderay3296
3 жыл бұрын
@@tysonyoder2560 I don’t have a machine yet but hopefully soon.
That’s looks like a park, probably children running around with bare feet/metal shavings
Not trying to be that guy but if you have a huge ass house with a lot of corners I’d say wear a mask that aluminum can be killer in the long term on the lungs
The only problem is the noise😵💫