My grandmother used to to say that in the old times the khukuri was equivalent to possessing a jewelry. Youths in mountains took only a khukuri and travelled through the dense and wild forests to seek a future wherever it led them. That's how life were before roads were built. My late grandfather did the same and later joined the Indian army. I am from Nepal! Jai Nepal🇳🇵

@ZanderJaverson

Ай бұрын

Interesting

I have to say this video highlights why I love the sword community above all others. You can talk about blood, guts, horrors or war etc but it's always referred to in a sense of "we're all adults here", history is violent and we are learning something interesting that many people shy away from due to its violent nature. I genuinely believe this communities ability to approach topics maturely is one of its hallmarks and really broadens the mind.

@bryananderson3772

2 жыл бұрын

You'd like to gun community too

Just to let u guys know, Khukuri is one of those weapons not designed for weapons and actually primarily as a tool. Its an axe, branch cleaver and meat slicer three in one tool used by gurkhas traditionally in Nepal. If u trace down the history there were no axe, meatcleaver or machettes used there. The only other cutting tool was a Sickle for cutting grass. Gurkhas were all farmers with no ruling class until even early 20th century. So they had no armies and no such weapons. It was not until the invading colonies with their force that they started using Khukuris as weapon because its all they had. And boy, it really proved its worth. so next time u buy one of it, u take it to the backyard and use it as a farming tool. Ull get more satisfaction.....

@areyouavinalaff

7 жыл бұрын

and that's why it has the notch it has... everything about the kukri is engineered to make it a great tool... especially for chopping. the notch has no religious or ritualistic purpose. the notch dampens vibration caused by chopping and prevents it travelling into the handle along the edge... especially useful on kukris where the tang is visible between the handle layers. vibration waves, in thick steel like used in kukris, radiate longitudinally i.e in a straight line and in all directions, so when vibes meet the boundary of steel that is the notch, vibes can't go any further... the kukri itself is banana shaped to also take vibration out of the handle.... again longitudinal waves don't go round the bend so to speak so with a banana shaped blade and tang you get reduced vibration so it's more comfortable, especially on the fingers. the prong in the middle adds strength to the notch root and prevents cyclical stress cracks from starting in the root.

@areyouavinalaff

7 жыл бұрын

well you obviously haven't tested it yourself lol otherwise you wouldn't call it ridiculous... you simply don't understand the vibrations at play... it's high frequency resonances. so instead of telling me to test it myself, why don't you use valid argument based on science, logic and reason. your post is worthless. good day, sir.

@-Zevin-

7 жыл бұрын

I found some of these in Thailand, being sold as exactly that, for utility not a weapon. The seller looked surprised that a foreigner was so excited to buy what I'm sure he saw as a boring everyday farmers knife. Ironically I never saw any kukri type knives being sold as weapons, only flashy Chinese fantasy type stuff being sold to tourists. I had to go into a little hole in the wall utility store, and found them by chance.

@debendragurung3033

7 жыл бұрын

Are you 'avin a laugh? Is he 'avin a laugh? I have used khukuri lot of times, and U seem to have a point just never realized.

@mattlee5333

7 жыл бұрын

Are you 'avin a laugh? Is he 'avin a laugh? I don't know if that theory is accurate. Certainly the shape of the blade will reduce impact vibration better than a straight steel bar blade like a broad sword. But, the tang of the kukri still extends into the hilt, thus transferring the kinetic energy of a impact. I'm not sure that two minor ovoid cutouts (or notches) would do anything to dissipate the transfer of energy.

My great great grandfather brought one of these with him when he came to New Zealand from India. Compared to the kukri used by modern Gurkha troops it is a far larger weapon. Also, the stories about its use passed down through the family, suggest the thrusting attack was actually done under-handed, stabbing in and upwards. However, that was just from personal experience, I don't mean to suggest it was done exclusively that way.

I brought back 6 from Nepal a few years ago. No problem getting them home as they were packed in amongst some sharp pointy climbing gear. Got some Gurkha issue ones, ceremonial to be used for display, and general service ones and some general purpose jungle ones. Got mine from thr kukri house in Kathmandu. Very impressive to use, and makes short work of chopping up carcases for the dogs, including cow thigh bones.

Awesome video! I never really thought about the purpose of that band before. I have often wondered if there was a reason the band seems to have a sharper ridge near the butt of the handle and a more gentle slope on the other side. When you grip the handle, your hand can go back until it hits the flared end, but it doesn't go forward. That's a beautiful khukuri you have! Really nicely defined fullers and that graceful curve to the blade.

@blueturborider

8 жыл бұрын

I love your videos Nick :)

@douglasclark5897

3 жыл бұрын

Agree. paused the video at 2:15 just to study the blade geometry. I am looking at many online and trying to find this exact one. Some have a straighter handle or more even curved, some have less inner blade curve or less back angle. This one seems to be the ideal balance of all the features.it also appears to be on the bigger side, and have a 12" -13" or so blade and a little more handle length, idea for use bigger Saxon sized folk compared to the nepalese stature folks these were first intended for. Someone should use this video example as the pattern for making new Kukri. or If anyone knows where this one is reproduced for sale please post a link. Great Video, Learned a ton more about what to look for Thank you very much, new subscriber, former kendo guy & former infantry guy from back when the Bayonet Qualification Course was still a requirement to pass infantry school at Ft. Benning, and would occasionally produce gruesome accidents.

@VampireGranny

2 жыл бұрын

@@douglasclark5897 I have this exact Kukri given to me by my grandfather. Really interesting to see it! It was given to him by a Ghurka friend of his. I thought I'd come on and search for it on this channel and it happens to be on the first video I see!

Oh man, good stuff. Efficient and to the point! Thanks mate

In this video your delivery is good. 6 years later your delivery is perfect! Congratulations on improving so much and on your recent 300K

The stab is done by throwing the point forward, nor by pushing. When the tip thrown forward while rotating the blade down it has massive penetration power. Imagine starting a chop while your fist is next to you side (blade held at shoulder height fist at heart level) while simultaneously pushing your fist forward in a motion similar to a jab, the tip needs to land just before your arm is straight. The technique also works for spearing bits of wood when chopping firewood.

Thanks..I was looking for Khukri History and the reason they designed it like this..Only got on your Channel..Thanks Heaps 🙏🏽🙏🏽

Man, you know a lot. Congrats, and thanks for sharing your knowledge

Exellent video! I really appreciate the information that you included.

When I was young, a friend of my fathers was a vet who had commanded a company of Montagnards in Viet Nam. He had a Kukri on display on his mantle that he said was a gift from his company. No idea how they are all connected. I do remember it having that band on the handle, it was very odd to hold for the first time. He was a wonderful guy, gave me my first lessons on how to fight with a knife lol. It was seriously spooky having this Green Beret with real experience wave a knife around me. His intensity just ratcheted up to a whole new level. I remember his first lesson: "go for the balls, no one expects you to go for the balls!" This was followed by, go for the eyes :)

Great Video! That's a sweet kukri you have there.

My favourite part of these videos is having someone stab and hack at me over the internet.

It's a blade stop. When sword or knife fighting with someone else, it stops your opponent's blade from sliding down cutting your fingers and disarming you.

Awesome, probably my favorite blade style (especially for a sword like the falcata or kopis); it looks interesting yet powerful

when I spoke to an ex army Ghurka about using the knife he recommended the sirupate,and said that the first jab would be to the midsection,as this would cause the enemy to double over,the second cut to the back of the neck.Very similar to karate and kobudo strategy.

Very good revealing explanation ! Thanks!

Great video! Thank you for sharing.

I have a new version Khukuri, and that is its a full tang, it's heavy but also a Tank, but I had a smaller version made the style I selected is the M-43 a beautiful style.

Don't recall if I have mentioned this before in this post (I didn't see it in the comments below, but I didn't go through all of them). I had a brief time with some people who truly knew how to use the Kukri - one of the techniques was a thrust to the belly (blade to the right for a right hand hold). Once in the target, rotate the blade to point to the ground (90 degree rotation), then put your body weight on the blade to cut downward for the removal, producing a rather large exit wound (there is footwork that goes with this as well - you don't just stand there without moving your feet).

Science Nerd alert (myself): Your comparison/analogy of stabbing techniques while using the Kukri in comparison to a kitchen knife is brilliant. I also appreciate the other Viewers description about the notches as well!

My Kukri from India bought 25yrs. ago still going strong after years of use.

I have contemplated this while playing with my British military-style full-tang Kukri. Glad to see I'm not the only one.

Intriguing. Thank you.

I do have a modern khukuri made custom by a kami and the ring on the handle is a little larger than the other military reproduction models I have. The blade is 12"s long and somewhat pointer than most and would make an excellent thruster type khukuri. Thanks for the great reviews you do so well. 👍

Outstanding!

I like the shape and design of the one you have. I've never found one that wasn't made in Pakistan or Condor, or Cold Steel. I'd use it for pruning my tree and bushes, and gardening. I like the history of it and I'd use it as a tool. I've seen a few modern ones but they are polished to a mirror finish and they're so thick I don't think they would cut anything.

I just 20 mins or so ago bought myself a kukri you surely wouldn't approve (of as a 35th birthday present to myself [ my life sucks these days so I had to go for the budget as opposed to gourmet version] -- wanted on for a while, did the best I could) but I wanted to say - you are extremely good at this.... Very very knowledgeable about your subject(s) and good at teaching/conveying your knowledge. I don't want to sound like a bitch but believe in giving credit where credit is due and you're clearly someone who knows his stuff and can talk the talk alongside walking the walk - thanks for the videos and your time sir.

@ledzeppelin27

6 жыл бұрын

it's a great knife to just have in the collection honestly. I was told to beware of the cheap tourist ones but I bought an inexpensive Indian one and it was surprisingly well made and worth every penny. But I wouldn't exactly take it out camping. lol

great post :)

On people forgetting history: research how the British Empire forgot the cure to Scurvy.

Well you just blew apart any thoughts about the one I have. It belonged to my grandfather. It has a Lion like you described.

Excellent description

very useful class about incredible blade - how beautifull work of blacksmithing congratulations

I love my kukri, taken from the dead soldier who carried it. Priceless.

Very helpful,just inherited one.

Thank you for the information! I have an old Khukri that could be twins with yours, and I tried the center wring gripping. (Mine is not quite as pronounced as yours, but it worked) The spine on mine is almost a half inch thick!

"I try not to be too bloodthirsty in the descriptions..." I had to chuckle. Among other things, I teach kenjutsu. Usually during the summer my Juniors (6yo - 12 or so) get one night a week of dedicated kenjutsu training as a reward for training all summer. I have found it's virtually impossible to explain exactly the whats and whys and hows and history without getting very ... ah ... "descriptive." I realized one day I'd just explained why a strike straight down to the forehead is a good way to stop an enemy, and why a diagonal cut all the way across the torso was effective -- to 6, 7, 8, and 9 year olds! I was a bit upset with myself but their parents were there and nodding their heads and seemed to be enjoying hearing all this too. Anyway, late comment on an old video but I was looking for Kukri material and you, as always, provided a lot of great material. I was just remembering the fancy kukri my father gave me when I was 13 or so which started a life-long fascination with them. Thanks!

Bro nice information 👌

the thrust into the belly probably a downward thrust, R-elbow rather high, edge to you right; you get more penetration that way, a longer pathway to use; then twist as far as possible as withdrawing; may get around 270dgrees rotation/3/4 of a full circle; as blade exits, can rotate into a nice circular slash, if close enough to opp; skinny kukries no doubt used to stab&twist in ribcage, many ribcage targets; also stab&twist great for grappling when battle-line breaks down

Thanks for yet another great video Matt. I do have an issue with this point though. I own a relatively large (15") Kukri, brought back recently by a friend from campaign in Afghan. Great steel compared to my western store bought Bowies, real horn, peened tang, seems legitimate for comparison. Now I'd had the same thought as you regarding the band, an aid for thrusting seems logical. However on testing cautiously I can say there is no way I'd risk my hand on what, on my example, is a band raised by less than 3mm. I can feel it slightly resist my hand sliding up the handle onto the blade, but not enough to achieve a reliable thrust without seriously endangering my hand. Even the slightest natural oil or sweat on my palm overcomes the ridge and makes it a really risky movement, even when done gently against little resistanc, and totally out of the question when thrusting with any force. Do you think the band on my example is smaller than the norm or should we rethink this? Have you done any tests yourself? Thanks Matt, I'd love to know your opinion.

Thanks for the information.

Fascinating! I have been wondering about the design and how these warriors used these.

I love this weapon! I bought one that was sent to me straight from Nepal. Bronn from Game of Thrones made fall in love with this weapon. Although it's short in length I think it's thick back side is excellent for quick blocking.

@jeffslade1892

4 жыл бұрын

Crikey! you don't spar with a khukuri, you'll end up dicing your friends, even it you don't lop your own limb off. These things are definitely a case of, "that, is not a knife"

What would be your recommendation on more modern kukris, like some of the ones made by Smith and Wesson with a rubber handle? Most of the things I buy come from local gun shows, and I haven't seen any antique kukris, only more modern versions.

Very instructive thx

Thank you!

great!!!

Flared pommels seem to be pretty standard on antique kukris. Any implications for use? It would seem to indicate that the hand slipping back was more of a danger than slipping forward. Or perhaps it is there to enforce a hammer-grip?

The kukri and karambit are my favorite knives

I'd guess that it probably also helps that the handle is offset in the thrust like a pistol grip so that the hand is pushing against the grip at an angle rather than along it as with most swords or daggers, creating more resistance to prevent it sliding forward.

Proud to be a Gurkha

@johnmason1239

Жыл бұрын

British are very proud to fight with you, thank you vvvv very much! 👍👍✌✌🙏🙏,beautiful people, British should also use you as RAF pilots are your brave& able to work vwell at height with little oxygen.

Around 2:35 I was like he seems to know his stuff, I'll subscribe. Then I found out I already was.

Proud to be a Gurkha...!!!

@johnmason1239

Жыл бұрын

British are very proud to fight with you, thank you vvvv very much! 👍👍✌✌🙏🙏

@TheMightsparrow

Жыл бұрын

@@johnmason1239 joanna Lumley's father was a Gurkha. Same regiment as my Grandfather.

Very6 good info

I just got an antique replica. It's fantastic.

The missing band may have another reason, other than tourist trap... The Nepalese use the Kukri blade for pretty much everything, a cook knife, skinning, removing annoying plant life etc. I would not be surprised if the hilt band was a feature of Kukris specifically made for war.... I think it is important with the Kukri to remember it is a blade used for a huge number of purposes, and is the Nepalese version of the Parang/Machete as well as their general purpose knife. I have seen bespoke custom made Kukris without that hilt band.... but before now I had never really considered why it was there. Now it appears obvious, those with the band (that are not Indian knockoffs), are fighting blades. Those without, are not.

@s.waldron8532

5 жыл бұрын

I have one made by ka-bar that is most definitely a fighting knife, or can easily be used as such, because it has the traditional ka-bar handle with the guard above the index finger.

The ring serves a very real purpose- a bit of "bat-tape" around the blade-side of the ring helps too, if thrusting is your goal... a Top-edge sharpened an inch or two assists in that as well. Some fighting kuks are designed to deliver a vicious thrust..

Nice video

Very good!

You also have the curve of the weapon preventing you from running up the blade. If you watch how you thrust with it, you can see most if your resistance is going to push against the hilt as opposed to along it.

very interesting..

Now that I think about it, a lot of Viking Swords have a similar placed band made with rope under the handle leather, I wonder if it was originally for a similar purpose.

Btw. you can stab "from above" (having the edge vertically) - the kukri design is excellent for that due to its blade curving. The technique is little odd perhaps from perspective of straight (HEMA) weapons, but it works fine and it is employed in FMA (Filipino knifes, swords and machetes are often crafted in similar way, many times with curving just above the hilt): You cut from above (usually diagonal) and then you make a forward thrust, slightly chopping with your wrist stabbing into your opponents chest. Because of the blade curving your hand ends up in an angle towards the angle of the stab so your hand doesn't slide on the edge and you have plenty of thrusting power since you can push yourself into the stab. (This may sounds complicated but if you try, the movement itself is fairly simple - it allows you to go with diagonal cut and change it into stab when you get an opening - or to go for stab and change it into more defensive diagonal motion easily).

Very lovely looking tool and weapon

good vid

I am from nepal and i carry a khukuri just a normal light one in my treks or camping it is very useful tool it has many applications i chop wood from same blade cut veggies with it cut hard bone meat with it and is an excellent weapon we nepali has been using it for centuries and mastered it

@Hepta.Asteras

2 ай бұрын

what size?

Hi!!! If you can get a Chilean Corvo knife and make a video about it, it would be GREAT!!! Nice video about the Kukri it's a wonderful design.

very good commentary.

Interesting.

u got a really beautiful khukhuri

Great video. Where can I get one like the one you are showing?

They look like a practical strong knife. They remind me of the bill hook used here in Britain. I’m a butcher by trade and could imagine the thicker part of the blade would work as cleaver. I think I have seen the thinner part closer to the handle being used to chop vegetables. I think it’s probably protected when using the thicker end on more heavy work.

Thank you, now I know vulcan salute were does come.

I agree with you sir

Recently found out that my grandad (who fought in ww2) managed to trade with a Gurkha for his khukuri and kept it until he died so obviously I research it and they’re much more interesting than I thought

Got to agree that you are dead on. We often miss or fail to properly appreciate important features of older blades. I had sort of gotten the band as a slip preventer. I would have still liked a modest half guard. The notch most likely would stop your hand with an ouch due to the projection at the bottom. The large broken backed saex has something of the same problem. To me they look like the blade was ideal for stabbing through mail but no guard. Of course if the grip was a large antler base, as seems to have been the norm, it might had had enough roughness to prevent slipping and slicing your hand but still...

I would like to know more about antique tulwars since their prices vary wildly

Could the notch at the base of blade be for attaching something like a band or chain to help keep the Kukri attatch to you?

Well, remember modern fencing uses a pistol/natural/ergonomic grip. It actually does make some sense to have it angled like so for thrusting.

very pointy. and rigid, very strong. close-up mayhem. are they good for throwing like a tomahawk? do you carry two?

It seems like it would be nice in a point down grip as well.

Matt, sorry to be a bit gory with this question. Thrust in and rip out techniques, often include a twist. That is, thrust in, twist, rip out. Is there any evidence of the khukri being used in this way, or not? With such a broad blade, it would need to be a rather forceful twist.

I am from Nepal and I proud my country

What are the 2 mini little knives that also go with the sheath?

was told by a relative that fought in the pacific in ww2(australian), that the Gurkhas in the area at night would slit a soldiers throat from behind with their kukri. to check friend or foe they would first run their hand down to feel for an Australian emblem/patch before hand.

Fantastic field-craft blade. With one 1-2 pound knife on a 14 inch Kukri, you can take out an axe, hand saw and carving tool out of the rucksack with the weight of a single knife. Its not better than the previous options but its a nice jack of all trades that makes me lighter. Also, its better than a bowie knife because you're going to get tired, with the frontal curve, it makes chopping wood/clear forage/stick construction much, much much easier especially when you lose grip strength from fatigue. The only downside is that its not a very safe weapon to draw or sharpen. One of my soldiers almost cut his pinky and ring finger off when he pulled it out of the sheath the traditional way. Luckily I was there to notice and yell at him when I saw what he was doing wrong and he only got stitches instead due to his timely flinch reflex. Not something to just use if you don't know what you are doing even if you know blades, that frontal curve is something very unique and extremely distinct feature of the blade that you have to get used to when using. Still, I carried a cold steel 14 incher for 6 years when I was an infantrymen. Did wonders to make my back feel better when I was in the Recon Plts and rucking ridiculous mileage under time constraints. Also scholagladiatoria is correct on the ring. Almost cut my fingers off had I was not wearing gloves when I was chopping sticks to make camouflage when I first took it out to the field. I fixed the problem by cutting up bicycle inner tubes and making ranger bands out of them to make an ad hoc hand stop. Had to layer 4 different sized bands on top of each other to properly stop my hand from slipping but it did the job.

I guess I wouldn't trust that ring as much as I would to a some kind of crossguard :O

I have over 50 Kukri blades from around the world. The best I have seen and use are from KHHI in Nepal. KHHI's products are well built and have great historical accuracy using modern steels.

Are there any manuals or training materials from the Gurkha regiments themselves or their troops - either historically or currently?

A lot of comments praise Kukri with nonsense like "it's a source of power", "it's the most effective tool for killing", etc. For those seeking a more logical explanation as to why a kukri is considered an indispensable tool: VERSATALITY Look at the kukri above. Its unique design means its not just a tool for killing. Its a machete to clear away vegetation, a hatchet to branches to start a fire, its a hunting knife, can be used for rough skinning, it can be thrown at a target, can be used to cut open coconuts and fruits, pierce through tough leather hides, etc...

When you show the two finger gripe for the trusting, I got remind that Miyamoto Musashi also mentions this kind of hold for the katana in his book of the five rings, saying that the sword is easier to control with that kind of gripe, if I remember it correctly, has been at least 15 years since I touched the book. Not to start a katana discussion, seeing you had enough on that, just a random comment. ;)

One of my absolute favorite weapons.

@babajamiaco

4 жыл бұрын

How often have yo used it to call it favorite?

Does that semi-circular indentation at the base of the blade serve any particular purpose?

Good

I like the rustic finish on that blade. Question, Matt sir. When browsing for a kukri blade, should I be willing to spend about the same amount as I would on a really nice dagger, or are they closer to axes in terms of pricing, in that you can get a fairly decent and functional blade between 100-200 dollars?

@haltestelle793

2 жыл бұрын

6 years later...

Could you tell us a little about your antique Kukri? Any antique has some story to tell after all.

Just found your channel so I'm playing catch up... lol I have a kukri it's missing the two smaller blades but I cant seem to find any info on mine... it's got 5381 on the tang. It also has several brass emblems on the scabbard which I cant find the exact ones. One in particular is a woman surrounded by flowers and it appears she had flowing wings i have searched the internet and even tried picture search and still nothing. It appears very old definately hand made and chiseled. Any info would be helpful.... thank you for your time..

Hi, thank you so much for this video. Are their sources for your theory about the handle band, or is it what you've found from handling the weapon yourself? I am not trying to discount your theory if it's the the latter- I'm just doing research and would like to know