Good explanation in terms of covering all the pertainent bases. Thanks.
@xveemon16 жыл бұрын
I have a pair of those and i love them!
@KoiKoy1097 жыл бұрын
lower rides mean more stability right
@mr.jamster84144 жыл бұрын
longboard slides look so much more fun than skateboard slides.
@kinglyrik95133 жыл бұрын
can you put those trucks on a street deck
@tacticsboardshop
3 жыл бұрын
You could definitely mount these on a normal board if you're wanting some big ol' trucks for your cruiser. They're not ideal for tricks or grinds though. 😄
@mauropache4 жыл бұрын
i have this trucks from 2 months, and i really love them. BUT i feel them a little heavy for freestyle. Good video, they are excellent trucks =)
@GhettoFabulous6708 жыл бұрын
isnt this the charger 2's from gullwing?..
@coober9658 жыл бұрын
is it alright to put a sidewinder on one end AND a reverse on the other?
@tinymooshroom12878 жыл бұрын
Have you reviewed the Paris V2 trucks? If so, then do you prefer the gullwing reverse over those?
@tinymooshroom1287
8 жыл бұрын
thanks!
@tinymooshroom1287
8 жыл бұрын
did you have any problems with the hangers bending? I read online that quite a few people had problems with previous gullwings where the hanger would bend after a while
@tinymooshroom1287
8 жыл бұрын
thanks!
@brennonh468
3 жыл бұрын
What's. Better
@TheReal_DeanD3 жыл бұрын
If you're a heavier rider is there are harder duro bushing to replace the 89a one? What are some barrel cone bushings that re recommended direct replacements?
@Creature00224 жыл бұрын
What would happen if you put 10 inch trucks on a 9 inch board
@tacticsboardshop
4 жыл бұрын
I mean, you can technically ride it like that, but it's not ideal. They would stick out 1/2 an inch on each side and you might accidentally kick the wheel when you go to push. It's definitely better to have trucks that more closely match the width of your deck.
@benwong32448 жыл бұрын
how heavy are the trucks? I'm looking for a lighter truck with good carvyness because my ORIGINAL S8 is too heavy
@rafariegoa9 жыл бұрын
Do you flip both trucks? or just the back
@rafariegoa
9 жыл бұрын
Thanks!
@count_of1310
4 жыл бұрын
Both trucks
@codyc73729 жыл бұрын
How would you compare these to 44 Cals for downhill?
@jackvonarx37819 жыл бұрын
Is it better to have one king pin or two 4 downhill
@blakeyoung6909 жыл бұрын
Would I have to worry about wheelbite with 65mm wheels and 1/2 inch risers
@blakeyoung690
9 жыл бұрын
Thanks man
@Peekaso08 жыл бұрын
what kind of bushings does gullwing for gullwing reverse?is that Tall bushings?
@jeremykight23096 жыл бұрын
Do you think these would be good with venom bushings
@MegaZobs8 жыл бұрын
What's the weight limit for those trucks ? Thanks
@davidrileywilliams53469 жыл бұрын
Can you grind with these trucks? Or could you recommend any longboarding trucks for grinding? I wanna do freestyle and grinding would be a ever so often thing because I still want to be able to carve and just have a smooth ride. Basically I've never bought a longboard and I need the perfect setup. I planned on getting the arbiter 36 DK cause of the double kick tail. I just really need help on what would be best.
@sunnyparkjoo8319 жыл бұрын
Can you tell me the weight of this trucks? I have charger 2, but a bit heavy. Hopefully this trucks are lighter than charger 2. If you can, tell me also the weight of the charger 2; so that I can compare them. Thanks, PS: I have Munkea as well.
@boscoserranovelasco33029 жыл бұрын
How do they feel for freestyle? Are they heavy? Prone to bending?
@alexchristen82099 жыл бұрын
Can these fit tall bushings?
@kracksmith4ejm16 жыл бұрын
can these trucks fit sector 9 drop through board such as the side winder? i like to replace the double king pin trucks
@owljoseph
6 жыл бұрын
Not on the Sector 9 Horizon I have. Didn't fit and a lot of those Sector 9 decks are made for the sidewinders.
@aikenalicando9 жыл бұрын
would this fit chubby/tall bushings?
@3XCODFANX39 жыл бұрын
can you run talls
@3XCODFANX3
9 жыл бұрын
Thanks
@moritzlieber18709 жыл бұрын
Which Board Do you habe ridden ?
@_jqy427
3 жыл бұрын
.
@webermendes43115 жыл бұрын
what degree they are after flipping the hanger?
@GnarkillSlayerGwar
5 жыл бұрын
Weber Mendes it doesn’t change the degree just gives it negative rake. Makes it feel more dead.
@webermendes4311
5 жыл бұрын
@@GnarkillSlayerGwar thanks for answering
@Blizzyblakexxx6 жыл бұрын
I'm just learning how to skate and I don't know if I'm putting this on right if possible can you at least do a video so we can see if possible can you at least do a video so we can see how to do it
@DaveonGrave9 жыл бұрын
How are these on a drop through deck?
@DaveonGrave
9 жыл бұрын
Thanks. I'm currently riding Randals on a drop mount, but I really like the features of the Gullwing Reverse.
@DaveonGrave
9 жыл бұрын
Check out my profile picture, it's me with a set of Gullwing Pro trucks on my first longboard over 30 years ago.
@webermendes43115 жыл бұрын
Do you prefer the gullwing reverse or Paris v2 ?
@GnarkillSlayerGwar
5 жыл бұрын
Weber Mendes a lot of people I skate with would say the V2 but I personally prefer the GW reverse.
@webermendes4311
5 жыл бұрын
@@GnarkillSlayerGwar thanks for answering , but why do you prefer the reverse?
@GnarkillSlayerGwar
5 жыл бұрын
I own a set of Skoa Vapor precision trucks and I love the response and lean of those trucks. The Reverse feels very similar to the Vapor I thought. It’s a really well made cast truck I thought. Paris felt a little dead in comparison.
@webermendes4311
5 жыл бұрын
@@GnarkillSlayerGwar Thank you my friend, that was all I needed to hear to make my decision. You helped me a lot, thank you very much.
@GnarkillSlayerGwar
5 жыл бұрын
Weber Mendes No problems man, thanks for the reply and update. That is my honest opinion and glad it helped you. Hope you love them like I do.
Пікірлер: 52
Good explanation in terms of covering all the pertainent bases. Thanks.
I have a pair of those and i love them!
lower rides mean more stability right
longboard slides look so much more fun than skateboard slides.
can you put those trucks on a street deck
@tacticsboardshop
3 жыл бұрын
You could definitely mount these on a normal board if you're wanting some big ol' trucks for your cruiser. They're not ideal for tricks or grinds though. 😄
i have this trucks from 2 months, and i really love them. BUT i feel them a little heavy for freestyle. Good video, they are excellent trucks =)
isnt this the charger 2's from gullwing?..
is it alright to put a sidewinder on one end AND a reverse on the other?
Have you reviewed the Paris V2 trucks? If so, then do you prefer the gullwing reverse over those?
@tinymooshroom1287
8 жыл бұрын
thanks!
@tinymooshroom1287
8 жыл бұрын
did you have any problems with the hangers bending? I read online that quite a few people had problems with previous gullwings where the hanger would bend after a while
@tinymooshroom1287
8 жыл бұрын
thanks!
@brennonh468
3 жыл бұрын
What's. Better
If you're a heavier rider is there are harder duro bushing to replace the 89a one? What are some barrel cone bushings that re recommended direct replacements?
What would happen if you put 10 inch trucks on a 9 inch board
@tacticsboardshop
4 жыл бұрын
I mean, you can technically ride it like that, but it's not ideal. They would stick out 1/2 an inch on each side and you might accidentally kick the wheel when you go to push. It's definitely better to have trucks that more closely match the width of your deck.
how heavy are the trucks? I'm looking for a lighter truck with good carvyness because my ORIGINAL S8 is too heavy
Do you flip both trucks? or just the back
@rafariegoa
9 жыл бұрын
Thanks!
@count_of1310
4 жыл бұрын
Both trucks
How would you compare these to 44 Cals for downhill?
Is it better to have one king pin or two 4 downhill
Would I have to worry about wheelbite with 65mm wheels and 1/2 inch risers
@blakeyoung690
9 жыл бұрын
Thanks man
what kind of bushings does gullwing for gullwing reverse?is that Tall bushings?
Do you think these would be good with venom bushings
What's the weight limit for those trucks ? Thanks
Can you grind with these trucks? Or could you recommend any longboarding trucks for grinding? I wanna do freestyle and grinding would be a ever so often thing because I still want to be able to carve and just have a smooth ride. Basically I've never bought a longboard and I need the perfect setup. I planned on getting the arbiter 36 DK cause of the double kick tail. I just really need help on what would be best.
Can you tell me the weight of this trucks? I have charger 2, but a bit heavy. Hopefully this trucks are lighter than charger 2. If you can, tell me also the weight of the charger 2; so that I can compare them. Thanks, PS: I have Munkea as well.
How do they feel for freestyle? Are they heavy? Prone to bending?
Can these fit tall bushings?
can these trucks fit sector 9 drop through board such as the side winder? i like to replace the double king pin trucks
@owljoseph
6 жыл бұрын
Not on the Sector 9 Horizon I have. Didn't fit and a lot of those Sector 9 decks are made for the sidewinders.
would this fit chubby/tall bushings?
can you run talls
@3XCODFANX3
9 жыл бұрын
Thanks
Which Board Do you habe ridden ?
@_jqy427
3 жыл бұрын
.
what degree they are after flipping the hanger?
@GnarkillSlayerGwar
5 жыл бұрын
Weber Mendes it doesn’t change the degree just gives it negative rake. Makes it feel more dead.
@webermendes4311
5 жыл бұрын
@@GnarkillSlayerGwar thanks for answering
I'm just learning how to skate and I don't know if I'm putting this on right if possible can you at least do a video so we can see if possible can you at least do a video so we can see how to do it
How are these on a drop through deck?
@DaveonGrave
9 жыл бұрын
Thanks. I'm currently riding Randals on a drop mount, but I really like the features of the Gullwing Reverse.
@DaveonGrave
9 жыл бұрын
Check out my profile picture, it's me with a set of Gullwing Pro trucks on my first longboard over 30 years ago.
Do you prefer the gullwing reverse or Paris v2 ?
@GnarkillSlayerGwar
5 жыл бұрын
Weber Mendes a lot of people I skate with would say the V2 but I personally prefer the GW reverse.
@webermendes4311
5 жыл бұрын
@@GnarkillSlayerGwar thanks for answering , but why do you prefer the reverse?
@GnarkillSlayerGwar
5 жыл бұрын
I own a set of Skoa Vapor precision trucks and I love the response and lean of those trucks. The Reverse feels very similar to the Vapor I thought. It’s a really well made cast truck I thought. Paris felt a little dead in comparison.
@webermendes4311
5 жыл бұрын
@@GnarkillSlayerGwar Thank you my friend, that was all I needed to hear to make my decision. You helped me a lot, thank you very much.
@GnarkillSlayerGwar
5 жыл бұрын
Weber Mendes No problems man, thanks for the reply and update. That is my honest opinion and glad it helped you. Hope you love them like I do.