Guitar Neck Reshape Fender Japan series Soichiro Yamauchi Strat
Музыка
We have done a neck reshape and neck refinish, neck coloring, fret change, nut change, and various settings on a Fender Japan Series Soichiro Yamauchi Strat.
First of all, is this baby good for the Japan series?
It's been a little while since Fendjapa disappeared, but I wonder what company plans and makes the artist models?
Anyway, since FJ is no longer around, is it OK to call it the Fender Japan series?
It seems to be a signature model of Soichiro Yamauchi of Fuji Fabric.
I can't tell the difference between the signature model and the artist model, but this guitar is a great quality guitar.
It's been a while since I've seen a guitar with such high quality. As expected of the Japan series....not to be underestimated! The red paint on the body is all satin and the neck has a satin finish on the grips, back of the head, etc., but only the head is glossy! It takes a lot of work.
But it's worth the trouble because the contrast between the satin lacquer and the gloss lacquer is so cool.
Although the customer didn't have a strong preference, we used the same painting method to finish it.
Because it's cool.
The name of this original paint job has a long name: Satin Urethane Back with Gloss Headstock Face.
So, the paint job I did this time is "Satin Lacquer Back with Gloss Headstock Face". (Laughs)
To be honest, this is the first time we have done a neck reshape.
The grip on the original neck is quite thick and D-shaped? I think it is, but I made it more like a normal C shape.
To be honest, the original grip was quite uncomfortable (compared to a normal Strat), but I think I was able to almost eliminate that discomfort.
I stripped the paint from the neck grip area, so only the grip area sounded white.
Normally, I'd paint the entire area as if it were a sunburn, but this time I decided to darken the back of the head and the area around the neck end to my liking. (I've got the owner's approval!) Ahhhhhhh. It's the best.
Satin lacquer Back with Gloss Headstock Face Thank you so much.
I changed the radius of the fretboard at the same time to change the fretboard. What 12R........just barely in terms of synchro tremolo.
I was able to set the string height to a little over 1 mm on the 6th string with the full adjustment range. To be honest, I think that it can be lowered a little more. (If there is an adjustment range)
So if you want to go lower, I think you can go a little further by adding a shim to the neck set angle, so I think the potential of the guitar is still there.
The sound is a perfect restrato feel! The owner is looking for a Les Paul and one that will replace the Telecaster, so it's a nice touch.
The synchro setting is a float in the normal range.
The bridge screw setting is also a basic 180 degrees back.
I personally like the quality of the instrument, and the way it looks, so I'm hoping the owner will like it too...
Thank you for your request.
Parts and tools used
Fret removal tool 3.peaks Top cutter-150mm TC-10
amzn.to/3jZfrH5 ...
white light with a soldering iron
FX600Aamzn.to/313owG1
TONE Power Grip Driver Set PLPGD6
amzn.to/2Q5MrRr
VESSEL Precision Hex Drivers
Set, amzn.to/2O6hFoC
1.27(inch) amzn.to/2X4xBvQ
1.5amzn.to/34KDAZs
Fret polishing 3M sponge polishing
320-600 amzn.to/2YC5c0k
800-1000 amzn.to/2JnIEd9
1200-1500 amzn.to/32iG29c
Metal polish is still Picard.
amzn.to/32Ip7f7
I like 3M masking tape, man. I recommend 6mm high frets on the guitar.
amzn.to/32H0gZ9
Dolmel 4000 Ruiter. Great torque, but hot! I can do a lot of things, so I'd like to be able to do 4,000 if I could.
amzn.to/2Kh3NH5
They have a new one called the 4300. If you can use the Stu-Mac base plate, this one might work too.
amzn.to/3712F48
3M body polishing compound, this is enough for a guitar.
amzn.to/34WHuhO
Plenty is good to have, orange English oil for the fretboard.
amzn.to/2Kh4G2n
This cross is tremendously good. Recommended. Seriously.
amzn.to/2PRUJM8
Website
pedaru.wixsite.com/andybassan...
Twitter
/ andybassguitar
Facebook
/ andybassguitar
Instagram
/ adachi_andy_koki
#Fender
#Andy_bass_and_guitar
#Restoration
Пікірлер: 87
Marvelous work as always Andy. You are a truly skilled and knowledgeable master of your craft! Keep up the amazing work and we appreciate you sharing your skills and experiences with us! The videos are really well done!
Andy, your channel is by far one of my favorites. Your work is both incredible and relaxing. I look forward to every new video!
thank you as always Andy, you are such an inspiration to work with patience and beauty. you are a zen master.
These videos are so relaxing. Thank you for bringing simple relaxing joy into my day
@gdnrecords
3 жыл бұрын
Agree
I’m really enjoying your channel. Thank you sir for posting!
Absolutely gorgeous work. Instant subscribed. Thank you so much for this. You are one talented man.
Amazing work my friend , truly amazing !! Much respect !!
Awesome work Andy! Watching you remove the tape, after a completing a fret level is a most rewarding feeling! Thanks for your inspirations!!!!
@Andybassguitar
2 жыл бұрын
Thank you too!
So cool and relaxing work, this guitar is a dream too ❤
Very nice job ! great video Andy
プロノリペアマンが使用する工具、機材を紹介していただけるのは大変参考になります。 痒いところに手が届かなかった箇所の解決に繋がりました。 過去の動画を含め公開していただいてありがとうございます！ Andyさんに今後もより多くの依頼があることを。
Beautiful work!! Incredible
Excellent work and great filming.
That was a master class in craftsmanship! Well done my friend
@Andybassguitar
3 ай бұрын
ありがとうございます。
Bruv, this was beautiful!
Beautiful work
Love your work
Great Job Man ❤❤❤
Damn... gorgeous job!
工具の紹介大変ありがたいです！！
Very cool job thank you
That's a wonderfull job! If I ever will need to do this to one of my guitar, I'll remember you while I will buy a brand new neck with the spec I need.
Clean work!
@Andybassguitar
3 ай бұрын
ありがとうございます。
Wonderful job ...so relaxing see you work on guitars ! I would like do it....and I am thinking to start on my old Squier .....
Lindo trabalho seus vídeos são ótimos 👏🏻👏🏻👏🏻👏🏻👏🏻
cool job
Buen trabajo amigo 🤙🏻
That's the first Fender neck I've liked.. except for Yngwie's of course. beautiful work. I'm looking forward to binge watching your channel!
@Andybassguitar
3 ай бұрын
ありがとうございます。
@GrandmaSiva
3 ай бұрын
@@Andybassguitar don'ttouchmymustache
Very nice work, Andy!
It's a very beautiful finish that will make your drink go faster!👍⭐️✨🤗😋😻😽❤️️🧡💛💚💜💙
Looking gooood!
@Andybassguitar
2 жыл бұрын
Thank you!
That is literally the same guitar I want only lefty with the big 70s head stock on it. But yeah that's my dream guitar and a gibson gold top lefty.
Excelente trabalho 🇧🇷
Congratulations fantastic. .👏👍👋.
You know I've paid for many guitar setups from different shops , and they never hmget the action as low asni want it ! ! They're also never suggested a neck shim either . Which i recently can slam the action even lower lol !! Again, awesome 👌 work sir 👏
i have about 18 guitars that need neck reshaping , getting old with hand issues stinks , anyway i think i may be able to tackle this project , great video !!
Que perfección 😍
どんな分野でも素晴らしい技術は何時までも見ていられる。 今年中には、リペアお願いしなければ‼️
お見事！もはや達人の域ですなぁ。 ネックを薄く‥って いつかやろうと思ってても 中々ね‥。 視るだけにしておきます。
Che meraviglioso restauro del manico hai fatto, complimenti! Sei davvero bravo e soprattutto hai una infinita calma, pazienza e precisione nel fare i lavori di restauro. Ho già visto tanti video dei tuoi lavori. Bravo! La chitarra é identica alla mia Strato made in U.S.A. Stesso colore, stesso pick-guard, stesso manico con tastiera in palissandro. Le sole differenze sono che la mia ha la paletta più grande e la skunk stripe sul retro del manico. Ciao, saluti dall'Italia. 🙂
@Andybassguitar
2 жыл бұрын
Grazie!Arigatou!
5:48 what a cute dog! :D
@felipeantonio5616
4 жыл бұрын
astonishing work by the way! if i were from japan, i certanly sent my guitars to you!
That's a sharp tool
Wonderful work Andy! However, it is generally cheaper, easier and more consistent to simply buy a replacement neck of your choice from Fender, or other dealers. You can then simply screw it in place and your done. For those that would like to attempt this at home, but don't have all of the same hand tools, you can use a random orbital sander, but it will take time and make LOTS of dust.
@triniep82
4 жыл бұрын
Sometimes owners want to keep the original neck tied to the body, especially if it's a FSR.
what type type of fret crowning and dressing files do you recommend? so many on market from very cheap to very expensive. Thank you in advance for your help.
Hello Andy , I'm curious why you back the bridge plate screws off of 1/8 ?
I have another question, do you maybe have an idea of how much one can take away from the neck to still be ok structurally? How can you tell how much is not too much?
It was curious 我が家の愛機もfiesta redにリフィニッシュして貰いたくなりますねー
最高！
Отличная работа и крутая съемка. Только я не понял, зачем было открывать торцы слотов?
Wasn't this the one you done live andy sat up half the night watching you do this incredible reshape awesome work also could you tell me why you put tape on the 1st fret before you marked the nut never seen that done before what's your theory behind that please
@bigsteve9291
4 жыл бұрын
@@barnett25 makes sense andy will try that 👍
Hi Andy, i just watched this video today. Is there any particular reason why you did some of the work on top of a futon/mattress/bed?
@Andybassguitar
2 жыл бұрын
If not on a soft cloth, the guitar will be damaged.
@pandutresnalaga13
2 жыл бұрын
@@Andybassguitar i see, great insight Thanks
when doing a new nut, instead of marking with a pencil, you can bang down on the strings that are in place with a hammer to start an indent
I love you
Perfeito abraço do Brazil sou seu fã! 🇧🇷
La musique vers la fin vidéo est de qui ?
いつも動画更新を楽しみに見ております。某オークションでFender Mexicoのスクワイヤseriesのストラトをポチッてしまいましたが、ジャンクの為、リフィニッシしたいと考えてます。お願いしたら価格はどのくらいになりますでしょうか？ボディの色も黒からミントグリーンにしたいと考えています。よかったら教えてください。
@Andybassguitar
3 жыл бұрын
工賃につきましてはandy.bass.and.guitar@gmail.com までお問い合わせください。
@Ricky-bw6lm
3 жыл бұрын
Andy bass & guitar 返信ありがとうございます。またメールでお問い合わせさせていただきます。
wow that 12" radius tho for a strat.
is it really necessary to sand the fretboard when you do a refret? or is it okay to leave it if the frets are clean? or should i just clean the fret slots?
@justinrayguitars6024
4 жыл бұрын
I believe he changed the radius from 7.25 are 9.5 to a 12 inch.
@emcdvz5648
4 жыл бұрын
@@justinrayguitars6024 but is it really necessary to sand down the fret if you're doing a refret?
@Vaco574
4 жыл бұрын
em struggle it is necessary to change de radius, to fix a twisted neck or When on the fretboard Have a lot of “finger marks “ , foi you Don’t Have these 3 condition , Just clean and install new frets
@emcdvz5648
4 жыл бұрын
@@Vaco574 thank you so much sir
@Andybassguitar
4 жыл бұрын
The reason for cutting the fret tang is so that if the fret comes out of the fingerboard when the fingerboard shrinks, only the fret crown can be shaved off to correct it. Does this answer answer answer your question? Understanding the English language is difficult for me. Thank you for your comment.
Why did he nip the fret tangs for this guitar without a bound fretboard?
@Andybassguitar
2 жыл бұрын
This is so that if the frets protrude when the fingerboard shrinks, only the fret crowns can be shaved to correct the problem.
Andyさんは塗装の時にはいつも素手なんですか？
@Andybassguitar
3 жыл бұрын
素手のことが多いです・・・ガンを洗浄するのにアセトンを使うのですが、耐アセトンの手袋で良いのが見つからないので素手で主にやってます。 缶スプレーだとニトリルの手袋でも溶けないんですが、アセトンを使うとね・・・天然ゴムの手袋でも良いんですが、良いのが見つからない・・・
asmr
I had to look it up, it's just another Fender Signature guitar..one of 50 thousand, it's also a $2400 copy of some unknown popular Japanese guitarist.
@Andybassguitar
2 жыл бұрын
It was one of the best quality guitars I've seen. I don't think you can go wrong buying one.