No video

GTR156 Dip Switch Adjustment HD

Turn your existing gate into an automatic sliding gate with the GTR156 automatic gate motor. An automatic sliding gate can increase security and value to your property whilst eliminating the need to leave your vehicle to manually open and close the gate. This kit plugs into a 240V Power Point.
Further settings and programming instructions on how to adjust the dip switch and VR.

Пікірлер: 10

  • @abc123birdsandbees
    @abc123birdsandbees8 ай бұрын

    Can I add a module to automatically and close the gate at a certain time of day?

  • @RichmondCastors

    @RichmondCastors

    8 ай бұрын

    Hi abc123birdsandbees, The motors are specifically built using screw terminals and simplified software so that 3rd party accessories can be used. This includes dry contact timers for specific operation times etc. You can also wire in a range of items that allow remote operation from anywhere in the world. If you need any specific wiring or compatibility information you can contact our gate support team. gatesupport.richmondau.com

  • @MrArt542
    @MrArt542 Жыл бұрын

    How to put a cable if ur gate motor doesn't comes with cable antenna for long distance connection & operation,open and close.

  • @RichmondCastors

    @RichmondCastors

    Жыл бұрын

    Hi Mr. Art, You can extend the existing antenna. If you email our technical team at gatesupport@richmondau.com they can let you know exactly how this is done.

  • @sebsadventures41
    @sebsadventures412 жыл бұрын

    Can you adjust the speed of the motor? Making the gate to close or open quicker

  • @RichmondCastors

    @RichmondCastors

    2 жыл бұрын

    Hi Seb, To keep things simple and easy to install, the GTR156 motor speed isn't adjustable. It does have a soft close function that slows the movement at each end of the gate travel. This soft close function has some adjustment available for slightly longer operation.

  • @xagtly

    @xagtly

    Жыл бұрын

    Is there a readily available larger diameter drive gear? Obviously, the track would need to be raised for the extra size. I'm not yet retired but will be by the time the gate opens and shuts. I defintely can't hold my breath for as long as the gate takes to open.

  • @RichmondCastors

    @RichmondCastors

    11 ай бұрын

    Hi Xagtly, You could have one machined if you need. But, this will put more stress on the motor, lower your weight capacity and cause more damage if the gate hits anything. On a side note, you don't need to hold your breath while the gate opens, it will still operate correctly while the user is breathing normally.

  • @habtamufeleke4522
    @habtamufeleke4522 Жыл бұрын

    Please send me menu

  • @RichmondCastors

    @RichmondCastors

    Жыл бұрын

    Hi Habtamu, You can download the GTR156 installation manual via the link below. This will include the settings information. www.richmondau.com/wp-content/uploads/2022/11/In-boxGTR156-instruction-manual-REV28.docx.pdf