I want to say the install says to remove the air pump and pull it out of the firewall or something.. glad to see we can just leave it in Also wish they had put the ethanol sensor on something other than the intake. Makes another piece to take off to remove the manifold

Did you get the npt fitting for the fuel sensor with this kit?

Is this the kit with the aftermarket rails? How was this kits quality and durability for you?

@BurntRubber

2 жыл бұрын

Did not come with aftermarket rail. The quality is great and it’s very durable.

The “small” line is the return, the “big” is the feed. Having it on the feed gives better readings! Did you have any issues after installing this since it deleted one of the dampeners?

@BurntRubber

Жыл бұрын

Nope no issues what so ever. Solid kit when you install it right!

@waferzworld

Жыл бұрын

@@BurntRubber I did the install yesterday, went well. I will probably tear it back down and add a pressure sensor soon.

@BurntRubber

Жыл бұрын

@@waferzworld thats a good idea. my tuner wanted me to add a pressure sensor but i never got around to it.

@waferzworld

Жыл бұрын

@@BurntRubber The tuner is right, mainly because you can add safeties in Ecutek with the sensor. Makes it almost fail proof

@waferzworld

Жыл бұрын

@@BurntRubber I’m actually concerned with how we would hook one up, because they all use the same rail as this kit. It would have to be double up adaptors which I’m not a huge fan of

The grey plug that you unplugged from the secondary air pump that connects to the kit confuses me. do you not connect anything to the secondary air pump anymore since the grey plug is plugged into the kit.

@BurntRubber

Жыл бұрын

Correct, you do not need to connect anything to the secondary air pump.

@BurntRubber

Жыл бұрын

You need a tune to properly run this kit. But I started my car to check for fuel leaks which I highly recommend doing.

@patm8880

Жыл бұрын

@@BurntRubber Got it exactly what i thought. Ya ima have my tuner send over another map once i install it

@BurntRubber

Жыл бұрын

@@patm8880 awesome let me know how it goes!

@patm8880

Жыл бұрын

@@BurntRubber everything installed. car made 640whp. kept the torque at 605whp for the tranny.

Leave the plastic off it does look good with out it

@BurntRubber

3 жыл бұрын

I agree!!

Jeff and kyles mechanic shop

@BurntRubber

3 жыл бұрын

haha the one stop shop

You should be thank full the fuel feed line and return line didn't match up. Your day would have went really bad. You new channel name would have been burnt engine.

@BurntRubber

3 жыл бұрын

Haha burnt engine!!

@phothrottle

3 жыл бұрын

@@BurntRubber jeff I'm installing my kit this weekend. Hopefully I won't make the same mistake haha

@BurntRubber

3 жыл бұрын

@@phothrottle good luck let me know how it goes

I saw you on the road

@BurntRubber

3 жыл бұрын

When?!? Where?!?

@Lando.o

3 жыл бұрын

@@BurntRubber on This friday

@BurntRubber

3 жыл бұрын

@@Lando.o I was probably headed to the track!

@Lando.o

3 жыл бұрын

@@BurntRubber nice

@ricersux

Жыл бұрын

What would you do different if you were to do it again? I have the same kit on order. I read the instructions but since I don't have the kit yet it's hard completely grasp the process.