Use my link amazon.lumineuxhealth.com/amazon/InheritanceMachining to get $10 off your Lumineux Electric Toothbrush on Amazon!

@Unc_Talks

3 ай бұрын

You could do a whole video on refurbishing this to better than brand new. Polished and painted.. Or send it to @TysyTube

@evilotis01

3 ай бұрын

v amusing approach to this sponsorship :)

@persiaper7857

3 ай бұрын

2h ago ??

@persiaper7857

3 ай бұрын

Comment 23h ago ??

@Metaldetectiontubeworldwide

3 ай бұрын

Wow 15000 rpm in the '50's , freaking awesome piece of machinery ☆☆☆☆☆ The Hotrod of your shop imo Grtz from the netherlands Johny geerts

Now who watches this channel didn't know that he would escalate quickly and disassemble the new tool from the moment the box opened. 😂

@slartimus

3 ай бұрын

I saw the disassembly coming, but the segue to the sponsor segment was a funny surprise.

@squishykotetsu

3 ай бұрын

Him: Now I'm not gonna go too crazy here and tear this thing down to every nut and bolt... me: 🤨 Him: tears it down to every nut and bolt me: 😌

@rquaidpro

3 ай бұрын

"Wipes down fine. Let's polish it on the lathe." 😂😂😂

@vincemanley3911

3 ай бұрын

As soon as he got a new "used machine" I was like Teardown coming!😂

@shawnwoodsman

3 ай бұрын

I thought it was going to get a coat of paint too

"I won't disassemble this tool down to its nuts and bolts." Yeah right, we know you enough about that. 😂

@InheritanceMachining

3 ай бұрын

You don't know me! 😂

@HappilyHomicidalHooligan

3 ай бұрын

Well, he didn't... I mean, he didn't tear the spindle completely apart to clean the bearings and bearing surfaces, nor did he tear open the motor to clean it's bearings and bearing surfaces either... I'd say, he only ripped half of it apart when he COULD have gone sooooooo much farther... Who knows, now that he's fixed the live centers, completely tearing down and deburring/lubing/perfecting the ENTIRE spindle grinder will be the next video... 😄😁😆😅😂🤣

@aserta

3 ай бұрын

@@InheritanceMachining Would still be a good idea to check the condition of the brushes and the rotor. Best get on top of that now, than later when they're worn beyond repair. If you have enough motors to fix... maybe even consider a rotor lathe. They're really cute and small. ;)

@flufster777

3 ай бұрын

Painting it next video.

Shop vac 1/2 full of water with an attachment to hold it right below the grinding wheel will save your lathe from the majority of that dust. It’s too fine to all be caught by the towels. But a combination of the towels and a shop vac will do a better job. The water in the vac prevents any fire hazard issues with the sparks.

@DoubleD132

3 ай бұрын

New side project, wheel shroud with a vacuum attachment

@cristianstoica4544

3 ай бұрын

Indeed, glass ornaments artists use them to get out glass particles all the time.

@dack42

3 ай бұрын

Beware that this trick is potentially dangerous with aluminum. Aluminum dust + water=hydrogen gas. Leave it sitting in your shop vac, and the next time you turn it on you get a hydrogen explosion.

@Otaku422

3 ай бұрын

If possible would a "dust collector" be better than a shop vac as long as you still address the fire hazard?

@BetweenTheBorders

3 ай бұрын

@@DoubleD132 With a wet cyclone separator? :D

**Lumineux** - So we sent you a new electric toothbrush to try out, tell us what you think **IM** - It was great! Got all the oil and grime out from the nooks and crannies **Lumineux** - Excuse me? Can you run that past me again?

@somebodyelse6673

3 ай бұрын

Hehe, yeah, I'd kinda like to to know how THAT marketing pitch went. "He did what? On a what? ... Okay, but did sales go up? Right. Tell R&D the next model will either be stainless, or battleship gray. And we need to offer brass and steel brushes too."

@soonerjohn06

3 ай бұрын

I mean... It's actually a pretty great use case for a sonic toothbrush

@mikeskupniewitz8057

3 ай бұрын

I used similar ones to scrub the painted fabric on a supercub airplane that had flipped upside down on a sand bar into willow bushes… was all green and brown, on white paint…it worked well to get down into the little spots in the fabric weave…

@InheritanceMachining

3 ай бұрын

I might be able to convince them of this!@@somebodyelse6673

@haydenc2742

3 ай бұрын

Daggum...HOURS and HOURS and HOURS of cleaning my M16A2 in the Marines back in the day...and I could have used a cordless sonic toothbrush! Sign me up!

That live center drive setup is pure genius.

@InheritanceMachining

3 ай бұрын

🤓

@howiem

3 ай бұрын

Gosh, isn't it. That's a proper hacker mentality: lateral thinking. Absolutely love it.

Rumors say that laptop is still sitting on the garbage can to this day :(

@robgoodsight6216

3 ай бұрын

😂😂😂😂😂😂❤❤❤❤❤

@lanefehr4873

3 ай бұрын

lol. but also 17:05

Wow, 15k RPMs is how fast one of the shafts in the Rolls-Royce Trent turbofan jet engines I used to work on rotates. No wonder that thing sounds like a jet starting up!

@squibblez2517

3 ай бұрын

What an odd yet appropriate bit of info lol. That sounds like a fun job!

@scottpageusmc

3 ай бұрын

@@squibblez2517 , LOL, gotta love the random knowledge! Now you know! Yeah, it was a blast. Made some lifelong friends and gained a ton of experience/knowledge testing those beasts.

One thing that makes me keep coming back to this channel is your ability to calmly command attention and explain things at ground level.

@InheritanceMachining

3 ай бұрын

thank you 🙏 I put a lot of thought into the explanations

@michaelrice500

3 ай бұрын

An engineer, by definition, is a person who knows how to use technology to solve problems. It can't be done without teaching, or at least it can't be done well. You can't really know your subject if you can't explain it well enough to implement the solution. Our hero here, is an excellent teacher, despite being goofy as.

@sihark

3 ай бұрын

@@InheritanceMachiningas a person who recently started working in a machine shop recently(partially inspired by you) i absolutely adore youre channel

Side projects of side projects are denoted by an exponent. Squared, cube, etc. Beautifully done once again.

@InheritanceMachining

3 ай бұрын

Ah, there it is. So if it's multi-layered so the exponents get exponents as well?

@timmymartin317

3 ай бұрын

@@InheritanceMachining I warn against going that deep, but yes. Square your squares if you must. This is inception level side project. Time moves at four times the rate of a typical side project. Tread lightly my friend.

When adjusting the preload on the spindle, take into account the fact that the spindle and associated bearings will expand when running at 6000 rpm for a while.

@InheritanceMachining

3 ай бұрын

good call. If I recall correctly it's sometimes necessary to adjust spindle preloads by monitoring operating temperatures. Too high a temperature means too tight and vice versa

@Gottenhimfella

3 ай бұрын

@@InheritanceMachining Axial Preload is also the reassuring answer to your misgivings about applying axial thrust through the spindle bearings via the live centre support when you mounted the cartridge in the lathe chuck for polishing

@Gottenhimfella

3 ай бұрын

OK, I've watched further on and you (as I expected) reached the same conclusion, but preload (on machine tool spindles generally but grinding spindles in particular) is not just intended to remove axial play. With angular contact bearings (and taper rollers) axial preload directly reduces elastic deflection under radial loading. In other words, snug is not enough: after all play is removed added tightening is required to induce "negative" axial clearance in oroer to produce stiffness in the radial direction. Anyone interested in learning about this could google SKF Bearing preload for a decent summary, but a rule of thumb which words for practical purposes with these two bearing types is to tighten axial preload sufficiently to cause a temperature rise (at or near the hottest of the bearing pair) of about 30 deg C (40 max) over ambient for lathe and milling machine spindles, and maybe half this much for grinding spindles (unless they're on a heavy machine where you'd maybe go to 75%). On a big machine it might take an hour to reach a steady reading, and that's the one you work to.

MOM! MOM! Inheritance Machning uploaded a new video. I CAN`T GO TO THE RESTAURANT WITH YOU!!! (Best afternoon experience)

@NickiRusin

3 ай бұрын

invite Mom to watch the vid with you

@joan1

3 ай бұрын

@@NickiRusin why haven`t I thought about that.

@linguini8331

3 ай бұрын

take video to restaurant, profit.

Man! I just watched all of your videos and I'm begging you to continue with them! It's soooo pleasing and satisfying to watch you making tooling and projects. I can't wait for an update of all the things that have to be done to your small lathe! Keep up and good luck!

@InheritanceMachining

3 ай бұрын

No doubt I'll be sharing everything about that lathe haha thanks for following along so closely!

Easily one of the more entertaining and educational engineering channels. Also the editing work your putting in these days is top notch! Thank you! 😁

@derschwartzadder

3 ай бұрын

I believe credit for the editing goes to his other half.

@InheritanceMachining

3 ай бұрын

Indeed it does!@@derschwartzadder

@InheritanceMachining

3 ай бұрын

My pleasure! Thank you for being here!

I'm 2 weeks into an Engineering (technical) course, in part inspired by watching your channel. The teachers love telling us how we won't be on the tools ourselves, so they've redesigned the course to minimize workshop time - as if it were a good thing. I've already got a damn degree in sociology and political science (a.k.a. advanced yelling at newspapers and underemployment). The entire reason I'm retraining is to chase after some of that sweet fulfillment that comes from identifying a problem, designing a solution and then - the crucial difference - making it a reality.

@bankerjumper

3 ай бұрын

Mech Eng here, the decline in using equipment/machines in today's engineering curriculum is unfortunate. I went out of my way to learn more about it in college, but I've seen people get to industry clueless to manufacturing realities and not realize how bad their designs or prints are since they don't understand what will go into making it. Luckily KZread is full of great channels like this to learn and grow, especially Brandon's work as he highlights his mistakes and that's when you learn the most. As you stated, one of my favorite things to do is identify a problem, theorize a solution, then create that solution with my hand. Restoring vintage tools in my spare time and building up a nice home shop also helps keep my mind sharp from a problem solving perspective. Good luck in your studies!

@InheritanceMachining

3 ай бұрын

I experienced this same thing. No shop classes offered for mechanical engineering. It's resulting in design engineers not understanding machine limitations and tolerances and the price you pay for a fancy 5 axis part that's overcomplicated! God luck to you though. If your college has any clubs like FSAE/Formula Student, this is a great way to get some actual hands on problem solving and machining experience

@sir_vix

3 ай бұрын

@@InheritanceMachining no such luck on the formula student front, I'm in Australia studying through our Tafe system, whereas FS (and similar) is typically reserved for our universities. I don't have the math skills to go straight to a degree, so I'm pursuing an advanced diploma as an engineering technician/technologist, with an option to extend into a degree down the track. Conversely, I did a short course in industrial design a couple of years back, and spent about 8 hours a week in a workshop learning all manner of fabrication and conditioning processes.

@Beakerbite

3 ай бұрын

@@InheritanceMachining Unfortunately, it's more likely we'll see a deeper dependency on automated fabrication QA checking than hands on experience to solve the issue.

@behindthedesign.

3 ай бұрын

@@InheritanceMachining I am in school for Mech Eng as a Tech and we are currently designing and building our own jigs for part production. I am glad my program has a focus on theoretical and practical Eng. When I do bridge over to Mech Eng to finish out the full PEng degree I think I will miss the machine shop time.

Love it. I scored a beautiful tool post grinder that perfectly fits my old 9" South Bend a few years back. Looked new in the metal case, along with all of the paperwork. I don't use it often, but it's great for those difficult jobs. Love the o-ring drive to true up the live center - very clever design!

@InheritanceMachining

3 ай бұрын

Nice! I think (hope) this tool will become invaluable for me. Especially given all the tooling I tent to make (and should have hardened) 😂

Nice build! I would only make one suggestion ... upgrade your Brake Cable to a double coil spring ... it will eliminate possible coil tension. It's the standard design for flexible extensions for 1/4" socket sets. Plenty of torque in either direction, and perfect flexibility. Thanks for sharing 🇨🇦

Are you aware how relaxing your videos are? Voice, music, shots, audio, all are very soothing to the ears and eye. Can watch these vids for hours. And your open approach to your mistakes and box of shame make appreciate my own errors a lot better as learning points instead of failures. Thank you❤

Absolutely right. Repainting that beauty would be a crime against huma...machinity!

@InheritanceMachining

3 ай бұрын

😂 Im gonna need to remember that one

The phrase, "As my (Grand)Dad used to say", is one of the best. Whenever it's used, the memories well up. Dad never got the tool post grinder he wanted, but this episode certainly makes up for it for me. Thanks for a great video !

@InheritanceMachining

3 ай бұрын

They have a tendency to stick with you that's for sure 😁 Thanks!

Makes his special tools with other of his homemade special tools. All a feast for the eyes to follow. And the guy's humor knows no bounds. Wonderful. More of it. 🤩🤓

I cannot tell you how much your channel means to me, watching you making old tools useful again and engineering beautiful parts. Thank you for your time and the entertaining video inserts. Chamfer on.

@InheritanceMachining

3 ай бұрын

Always my pleasure! And thanks for always being here!

When I was trying to figure out your what your picture was, I swore the groove was for an o-ring drive. I've seen similar setups on powered collet indexers used on surface grinders. I couldn't put it together... the hose clamp and "cable drive" are ingenious!

@InheritanceMachining

3 ай бұрын

That's exactly where I got the idea from!

Yes! The perfect afternoon entertainment is here!

You are a genius!!! The way you transmit movement to the tailstock is amazing. Good job man!

@InheritanceMachining

3 ай бұрын

I have my rare moments haha thanks!

@marceloiannini8199

3 ай бұрын

Totally agreed!

Using the screw to expand the pulley rather than close it is a brilliant decision. Fails safe, won't work loose, and has the potential to be more concentric. Little details make all the difference!

@InheritanceMachining

3 ай бұрын

Those are all pluses but the real reason i did that was for a low profile approach since there is no screw head!

Actually, hopefully speaking for many others--yes, we really do want to see you take every nut and bolt out of your new-old tool post grinder for a complete rebuild. A number of said nuts and bolts (well, screws) look like they're begging for you to make something new on the lathe. And I'd love to see you match the paint job. It is a nice machine color after all.

5:25 if you give a mouse a cookie... Hey Nathan, good job on the packaging.

For additional points in the overengineered category you could have included an oiling port in between the bushings in the tensioning device.

MOOOOOOOOOOOOOOOOM WE ARE (voice trailing off in the distance) GOIIIiiing machiiiiiniiiiing

When I first saw this pop up in my feed I through the thumbnail was a skateboard truck and then was expecting a sick skateboard montage from IM. Not going to lie, I am a little disappointed there was no skateboarding BUT once again great video! (minus the lack of skateboarding)

@InheritanceMachining

3 ай бұрын

that is something you defintiely dont want to see. unless you like watching someone fall a lot is what you like 😂

@ShadowKylar

3 ай бұрын

I thought the same!

I learned many years ago that any UBG (used but good) machine can benefit from a careful disassembly, cleaning, inspection, and reassembly. The big plus is that you now know the machine much better, inside as well as out. Of course, any damaged or missing parts can be fixed or replaced, and any fine adjustments made as needed.

@georgepigman4452

Ай бұрын

To me, its about the journey. All the side turns and alley ways just make it that much more fun and interesting, edgumacatin' before ya know it.

I used one of these to make brass instrument bell mandrels on an old hydraulic tracer lathe! Many sparks, much struggle... Not what I thought I'd ever do as an engineer! Shout out to Conn-Selmer(Cleveland, OH), the last mass manufacturer of brass instruments in America!

I love the attention to detail! Awesome work! This channel has jumped right to the top of my list of "can't wait for the next one!"

@InheritanceMachining

3 ай бұрын

Thank you!!

Dumore post grinders is still around. They go for approximately 3200$ - 4000$ 1/2hp to 3hp

@paul5683

2 ай бұрын

We had the same model Dumore Tool post grinder. We even had an extra long spindle for I D grinding. That one spindle was like close to 10,000 dollars.

Finally sound effects on the side project counter. I can now sleep at night!

@InheritanceMachining

3 ай бұрын

😂 shoulda said something!

My two favorite KZread channels for machinist work. CEE Engineering and Inheritance Machining. Both are top notch.

Need to sort the cable out though, my OCD was off the charts looking at the tape round the switch. Lovely work as always, love this channel

I love when he uses his previously made tools. Like it is all one big story.

If you haven't seen it already, MrCrispin has a great series of videos on setting up and using a tool post grinder. He used his to regrind the spindle taper on his lathe, as well as all his chucks.

amazing work Brandon, happy to see all your live centres in functionally use

@InheritanceMachining

3 ай бұрын

Thanks man!

Like you said, that tool is a game-changer. Congrats on you new acquisition.

@InheritanceMachining

3 ай бұрын

All the possibilities 🤯 thanks

I knew it would escalate to a cleaning frenzy and it was absolutely the right decision

@marceloiannini8199

3 ай бұрын

You'll see what is a cleaning frenzy once he has to clean his lathe! 1 min of toolpost grinder use, 10 hours of lathe cleaning (that's using towels and rags).

You should build your own heat treat kiln! There are several build guides out there, using lid Co strollers etc. For a few hundred bucks you can build it instead of 2-3k for a new one. I would love to see the over the top machining and construction you would do to the housing :D

Very good video brandon..thanks for your time

Your work is inspiring. You don’t sugarcoat shit at all. Thank you. Great video as always 😅

@InheritanceMachining

3 ай бұрын

😁 thanks, Terence

@mrimmortal1579

3 ай бұрын

Sugarcoated Shit…. Worst 1970’s breakfast cereal ever! 😂

Please replace the power cord and switch!!!!!!!!!!!!!

@rudycandu1633

3 ай бұрын

At the minimum get some heat shrink tubing and replace the electrical tape. I hate electrical tape as it leave a gummy residue.

Wow, your classes are a joy to watch. thanks

I just picked up a slightly smaller Dumore tool post grinder in much the same shape (wood case instead of metal) for $40 at an auction. About to do the same tear down/clean.

Thank you for your continuous healing content. It has helped make the engineer our of me i have always wanted to be. Scientist even ❤❤

Seeing something made in the home town I was raised in is a bit bitter sweet I’m happy you’re getting use out of it and hope it serves you well And it was most likely made in the 50s/60s Racine went to shit in the 70s

@InheritanceMachining

3 ай бұрын

DuMore is still in business, but I don't know if they are in Racine still.

@MyLonewolf25

3 ай бұрын

@@InheritanceMachining the Racine location closed in the 90s unfortunately They are still up north in Mauston though

Another amazing addition to your library of videos🎉

first new video since i found your channel!!

Every IM video: *_IT'S OUT OF ALIGNMENT_* What can I say... I commend your patience.

@InheritanceMachining

3 ай бұрын

😂

I really appreciate the unique themes of your videos and the high craftmanship!

the solution to drive the live center just blew my mind, so smart !

I saw that coming.

"I'm not gonna tear this thing apart just to clean it" Proceeds to tear it apart just to clean it.

As always, well done. I really like your style. Thanks for sharing your time and talent.

Loving the mix of machining and new tools lately! That is one beautiful piece of machining history

No! You cant just drop a video simultaneously with "I did a thing"! Now i dont know what to watch first :)

@bramh5264

3 ай бұрын

no way i had the exact same problem

Hand Tool Rescue would be very happy with your work on that grinder.

Watching you disassemble and sort out this tooling - just magnificent. 👍

Next time please just cut down the sides of the box and fold it away. I felt like I was about to watch someone die as you were trying to kick that empty box off the table

Wow! This one of my mostest favoritest videos so far! Thanks!

Congratulations for your new tool addition. Nice thinking using the cable you did to drive the secondary spindle. Thanks for the video and please keep them coming.

Thanks for sharing your knowledge. I always learn something. When setting the spindle on my tool post grinder for height and square I set the spindle between centers on the lathe and tighten down the tool post clamp on the grinder. Quick and accurate on two planes.

As always an amazing video. It’s so inspiring watching your channel grow. Thank you for everything you do and inspiring me.

I'm looking forward to seeing how your shop grows and changes over the years. Hopefully there's decades worth of material yet to come😊

yay! new video! in the past week, I've gone through and watched all of your videos till today's. I enjoy your content very much👍

One of the greats on youtube, great work sir. I always enjoy these videos when they come out.

I love seeing old tools get a new life. Love all the side projects you get into. Awesome job!

Very impressive work! Thanks for sharing

What a great project! Thank you so much for sharing

Way to go Nathan! Thanks for sending this over because we all get a cool video to watch because of you!

It has been a joy watching you grow.Well done.Snafus and success.

Such a satisfying project. I’m pretty sure I’ll never be as good a machinist as you’ve become… 1. I don’t need to be for what I do 2. I don’t have the background in math 3. You have a gift. But thank you for contributing to my education, and in a highly entertaining fashion!

You have a real gem there. I worked for the Boeing company for 13 years and as modern as our shop was we still ran a LOT of old equipment such as tool post grinders, trur trace units on our Bridgeport mills etc and after years of use still would get the job done. That man was super nice to let that grinder go so be sure and properly thank him. Good job on the refurbishment...

A beautifully over engineered solution to the centre grinding problem. Loved it. Thanks for sharing 👍 🇬🇧

Man, this old machines are something else. Things made in the 50 to 70's are beautiful and have a especial vibe. Or Maybe is just a nostalgic thing inside me

It's best to run it and warm the bearings up before setting end float or preload. I've seen the spindle bearings in a freshly rebuilt machine seize as the end float was set by intuition when cold and as it warmed up it became zero

I just want to say thank you so much for sharing this fun hobby and allowing us all to engage in friendship with you. You're a special person and your skill, humor, and sentiment all make for outstanding videos. So thankful I started watching your channel. All the best sir.

Loved how you drove the little centre turner dohickie! Very clever. Great video 😉👏👏

Apparently the trick to carbide parting tools is to run the workpiece as fast as you can and take a really heavy cut, your colleague Clough42 recently did a video on this.

@joshua43214

3 ай бұрын

I don't watch Clough42, so I don't know what he did. I do know most people I see on YT do it wrong on a manual lathe. Parting tools are like any other tool, they need to be run at the correct feed/speed, which can be pretty hard to do manually. I always power feed mine at the same feed that I would face a part. Carbide inserts need far more tool pressure than HSS, so they are next to impossible to feed at the correct rate with out turning the RPM down way to low.

Nice solution to driving the live centre, and very well made.

You are amazing on the rotary table! You built it to be synchronised with the way your brain works and it shows!

@InheritanceMachining

3 ай бұрын

funny i never looked at it like that but you are right! thanks

Your attention to detail is awesomely astounding, nice work as per usual 👍

As a design engineer myself, I loved hearing your comment about making them more efficient and reducing cost!

The memes run hard on this one keep going man this is fing awsome

Just got done building a small driveshaft on my channel without any of your precision...so I totally get how valuable it is to get your equipment as accurate as possible...I am stuck always with some small runout, or lack of concentricity, or outta square etc...nice addition

Love this channel, always get double the content- first time falling asleep to it, second time watching it (and sometimes a third time for fun)

Sunday morning here in England , just walked off my full Irish breakfast with the dogs , coffee, inheritance video ,sweet.always feeling the level,of satisfaction using that rotary fixture and those trick old skool hot rod clamps . Wonderful.

Great job. I have no machining experience but love your videos. Not sure how to explain it to myself. Very satisfying.

You make a lot of badass videos man, but this is my favorite by far. True resourcefulness and creativity.

Loved every minute of this. A tool-post grinder, like a surface grinder, is a trademark of the tool-and-die maker. Your adaptations are excellent, as always. Thanks for sharing your expertise and experience with us. Have an enjoyable and pleasant weekend.

Driving the live centre via the chuck was inspired. Such a brilliant build. As always, thank you for sharing. 👏👏👍😀

It's a good way to start the year. Thanks for the video, keep them coming, I gain inspiration from videos like this as I'm nearing retirement. Thank you again

@InheritanceMachining

3 ай бұрын

Thanks Ryan. You gotta figure out what you're gonna do with all that free time!

I enjoy watching your channel for the way you problem solve and apply those solutions. I am not an engineer of any kind. I am interested in the job at hand. A lot of the time I do not immediately understand. Listening to you, I can begin to put things together. I see why you enjoy doing it. Even when the solution escapes you there is that can do attitude. Before I retired that was the way I functioned. Issues were temporary, solutions were just thoughts away. Looking forward to the next video.

I literally patiently wait and check every day to see if you posted, my genuine excitement to see youve posted is crazy thank you for doing what you do

As always I really enjoyed watching this, thanks!

@InheritanceMachining

3 ай бұрын

Thanks, Wayne!