Cool machine there! Looks like fun💯👍🏾

i love the sound of the birds...

@VanLoweLawnCare

9 ай бұрын

Yes me to. Being down in a valley surrounded by woods on 30 acres, there's definitely plenty of nature to enjoy.

@bogdan909

9 ай бұрын

@@VanLoweLawnCare you're in paradise. enjoy it

Good video 👍🏼

@VanLoweLawnCare

10 ай бұрын

Thanks 👍

You need to tighten up the nozzle that goes around the grease fitting on the tool that way grease won’t leak out

@VanLoweLawnCare

6 ай бұрын

Not sure how you can tighten up where the grease gun hooks to the grease fitting. It's coming out from between the grease gun fitting and grease nipple. Not from the nipple itself on the tool, or the coupler where it connects to my grease gun. The bearing greasers were given to me, so I'm sure the leftover grease inside them hardened up a bit. I grease plenty of other equipment and don't have an issue.

@kevinlj3497

Ай бұрын

@@VanLoweLawnCare I tried several ends on my grease gun until I got it to work correctly. also, you might try different zerks. some of these Chinese ones are garbage from the factory. If there's clearance issues like I had with my rear greaser, a 45 degree zerk helped. You might need to file the base of the new zerk in the opening so the shaft fits past it when installing the tool. Hope this helps. :)

@VanLoweLawnCare

Ай бұрын

@@kevinlj3497 yeah I'll see what happens this next time I do them. I have a Milwaukee 12 volt grease gun and a knock off lock 'n lube

I have grease my friends wheel bearing on their machines and it can take up to 25 to 30 pumps

@VanLoweLawnCare

6 ай бұрын

I've heard you want to grease them, but not over grease them. That's why I did 10-15 pumps. Not saying your wrong and not saying I'm right.

What’s the name of that fitting you used to get grease in there?

@VanLoweLawnCare

6 ай бұрын

It's called a wheel Bearing Greaser. You can get them anywhere. I don't know where these came from as they were given to me in a box full of parts.

I grease them until I see a little bit come out around the seal

@VanLoweLawnCare

3 ай бұрын

I'd be worried that you would be compromising the seal by doing that. But I guess that doesn't matter since they are split bearings and we are greasing them anyways🤷🤦

@markbuck9299

3 ай бұрын

@@VanLoweLawnCare l haven’t had any problems doing that !! And I now have 10000 kms on my quad and have never had any problems with the wheel bearings

@kevinlj3497

Ай бұрын

@@VanLoweLawnCare The seals on the bearings are worthless from the day one. Keep it pumped full, the grease is the only thing actually keeping the water out.

@kevinlj3497

Ай бұрын

Polaris in their infinite wisdom made the inner race out of two pieces, so there is split in the middle. that is where the grease tool is able to get the grease to go in; Consequently that's where all the water and dirt works it way in also. Its a junk design that's been a headache for years. I pump the bearing until it looks like a bukkake shoot then pack grease all in around the shaft and in the hole before install the hub and watch it all squirt out around the edges while twisting the nut back on. My rig is in the creak and mud every weekend and this is the only way to keep my bearings for more than 250 miles... which is all they last if you don't.

I've got a '17 570, would that bearing grease tool work on it? If so, where can I buy one?

@VanLoweLawnCare

3 ай бұрын

I believe they are the same size bearings in a '17 and '22. So yes it should work. You can find the greaser on eBay and Amazon

It would help if the grease actually made it into the zerk, the tool and into the bearing. You didn't grease a damn thing other than your fingers. lol

@VanLoweLawnCare

Ай бұрын

😂 The problem you are missing here is these greasers were given to me and I had no idea how long they sat. So the grease hardened up in the greasers, took a few pumps to get it going. But it did indeed grease the bearings

One very important question is do you know JESUS CHRIST AS YOUR PERSONAL LORD AND SAVIOR?