Love your method Acrylic paint 4g to 1g graphite powder and a teaspoon of water works wonders too and much cheaper

@cuforming

Жыл бұрын

Thanks for sharing!

@donxgraphics

8 ай бұрын

​@@everardocoelhogomesfilho4618O que você quer dizer

@donxgraphics

8 ай бұрын

​Não é tão condutivo que você precisa para realmente polir o brilho. A primeira melhor aposta é com esmalte acrílico

@Dan-ry7ql

3 ай бұрын

I did the same mate and weirdly my rough texture objects are coming out great . The ones I prepped and polished do not a like me 😅​@@cuforming

@Dan-ry7ql

3 ай бұрын

I should note that I did the dab technique on the ring.. the rough bases I just brushed it on as I normally would ... This whole thing is backwards to me I'm a spray painter and shinny normally is your enemy for adhesion 😅

Super!

@cuforming

7 күн бұрын

Thanks!!!

I wanna give thanks to all my subscribers and supporters so, to celebrate 200 Subscribers and the “Love a Tree” Day, I will announce 10 giveaways of this recipe in my next Video on May 16th. Please subscribe and comment “I Love Trees” in the comment section to be selected for the giveaway of the Conductive Paint Recipe. Thanks to all of you!!! ❤🌲❤🌳❤

I love trees, amo los árboles!!

@cuforming

2 жыл бұрын

Hey, go check my latest video for the giveaway!!!

@alirezahorrihadafmandmachi5255

Жыл бұрын

I love trees

Thanks so much 🙏🏼

I Loooooove Trees!

@cuforming

2 жыл бұрын

Hey, go check my latest video for the giveaway!!!

I LOVE TREES!

I love trees ♥️

@cuforming

2 жыл бұрын

Hey, go check my latest video for the giveaway!!!

I love trees

@cuforming

7 ай бұрын

Sorry, too late. You can find the recipe here: beacons.ai/cuforming

Love a Tree

@cuforming

9 ай бұрын

Sorry, the giveaway was last year. You can buy the recipe from here: beacons.ai/cuforming

Can you provide a link to where I can buy the solvent and sealant? The recipe is a bit vague.

@cuforming

2 жыл бұрын

There is a link in the description with the recipe itself. In the pdf file, you can find links to Amazon and eBay for the materials.... Graphite conductive Paint Recipe: beacons.ai/cuforming ..... If, for some reason, those links aren't working anymore, contact me on Instagram or Facebook, I'll help you find the products you need.

@cuforming

2 жыл бұрын

And if you didn't do it already, subscribe to my channel!!!!

@TangoSierra-er2ne

Жыл бұрын

£9 for pdf

I love treees

Wow everyone in the comments..really loves trees 😅🌲

@cuforming

Жыл бұрын

That was for the giveaway on the following video where I made a copper tree.

What solvent and sealer have you used? I have tried different methods, using 1.alcohol 2. Acrylic paint. But with these the copper would flake off… Can you share this or maybe suggestions? I am trying to electroplate 3d printed items. (Resin)

@cuforming

8 ай бұрын

I sell the recipe here: beacons.ai/cuforming

@user-ob4xp1qy8o

4 ай бұрын

Иди на кухню с рецептом, продажник, балобол. ​@@cuforming

Incredibly useful video! When dipping the part directly into the paint, how thick does it dry up? Does it leave visible drops/clumps?

@cuforming

8 ай бұрын

Thickness depends on the concentration. To avoid drops or clumps, I just make a centrifugal movement to make all the excess paint detach from the piece. I do that inside the container, so it doesn't go all on my workbench.

@robinyilmaz1155

8 ай бұрын

@@cuforming ah alright. Have you had issues with the thickness of the paint causing loss in detail of the part? Because in the video, when you dip that little turtle in, it seems to leave quite a think layer. Or does that thickness kinda dissappear as it dries?

@cuforming

8 ай бұрын

@@robinyilmaz1155 You need to wait until it dries... contact me on Instagram, I'll show you a picture of that same turtle finished.

@robinyilmaz1155

8 ай бұрын

@@cuforming I successfully slid into your instagram DM's

Love tree 🌲 ❤

@cuforming

10 ай бұрын

Sorry, too late. You can find the recipe here: beacons.ai/cuforming

@zeka4907

10 ай бұрын

@@cuformingsorry I live in Iran and I don’t have access to any page to buy or pay money outside of Iran, so I can’t buy the Graft condactive recipe.

@cuforming

10 ай бұрын

@@zeka4907 I'm sorry to hear that! I hope that something will change for all of you!

@zeka4907

10 ай бұрын

@@cuforming Thank you so much🙏

There is NO RECIPE at your link to a recipe. What happened?

@cuforming

Жыл бұрын

Recipe is here beacons.ai/cuforming

@eCitizen1

Жыл бұрын

@@cuforming Nope, No recipe there

@dragonfire2371

Жыл бұрын

@@eCitizen1 solvent looks like it could be acetone, sealent i dont know.

@blueboogey

9 ай бұрын

​​@@dragonfire2371paraloid b-72 is the sealant

I'm a tad confused at what ive done.. soooo I was anodizing parts that's how I have gotten here kinda..... Anyway decided to try electro forming my own 3d prints for the RC parts so I can annodise them or something alike .. I can definitely... Definitely make the solution and I certainly can get it to electroform onto the graphite.. first attempt was a miniature base and it was really rough intentionally.. I wanted to see how hard it was to get the hard areas to coat... It come out bolooosy great and all I did was finger polish it and give it a real quick once over with a micro fiber ..... Now when I anodise I end up with copper spikes all over the aluminum rods...... Today I tried to do a ring.... I cannot get it to stick to save my life and ita bloody shinner then before and the current and voltage even seem to line up better... Haven't checked the resistance but by looks this should have gone waaaaay better I did it to the letter 😅😅

@cuforming

3 ай бұрын

Copper spikes are related to some contaminant in the electroforming solution, not to the conductive paint... you need to keep your workbenches separated, maybe in different rooms and to avoid other kind of metals near your tank, especially iron and nickel.

@Dan-ry7ql

2 ай бұрын

@@cuforming cheers for the feed back I shall do that.. and probably re do my solutions etc and get some new plates n things... Thankyou 🫡

I love tree 🌲

@cuforming

2 жыл бұрын

Hey, go check my latest video for the giveaway!!!

Olá bom dia, onde encontro a receita da tinta condutiva?

@cuforming

Ай бұрын

no meu site www.cuforming.com/tutorials.php

i love tree

@cuforming

2 жыл бұрын

Give away was on May 16th. Sorry. But thank you for your effort!!!

The ingredients and recipe seems to be gone from your website. Can you repost it?

@cuforming

Ай бұрын

Sorry, links are small... website.beacons.ai/cuforming/tutorials-shop

@kinggenghis9192

Ай бұрын

@@cuforming amazing! Thanks so much! Keep it up!

i love trees, los arboles son vida, cuidemoslos!!!!

@cuforming

2 жыл бұрын

Hey, go check my latest video for the giveaway!!!

"Hello! In the airbrush method, what nozzle diameter did you use? I've tried and the airbrush gets clogged... :(

@cuforming

2 ай бұрын

I actually don't know the diameter. I use the only one that came out with it, and it also gets clogged... but I only use it with the graphite paint so it's not a big deal for me since I clean it every time.

Amo los arbole

@cuforming

Ай бұрын

Gracias, pero ya pasó el tiempo de ganar. Si quieres la fórmula de pintura conductora entra a mi sitio website.beacons.ai/cuforming/tutorials-shop

how to buy the sealant. thanks

@cuforming

2 жыл бұрын

It's all in the recipe... wait for the give away!!! Thank you!!!

I can use real fresh strawberry ?

@cuforming

5 ай бұрын

Fresh strawberries have a lot of water in them which is gonna be trapped inside and get rotten in a week. You could try that, but you need to make a hole in the copper layer and remove flesh and liquids. Maybe after the electroforming process, you can bake the piece at a low temperature to allow it to dry. There is a video of Elementric Artworks which makes a raspberry, and he burns it red-hot with a torch. I wouldn't recommend that because the copper will get annealed and soft, and could get deformed just by pressing it with your fingers.

Is this graphite paint enough durable for car headlight reflector?

@cuforming

4 ай бұрын

This graphite paint is very durable. Its purpose is for electroforming and plating. What are you gonna do on car headlight reflector?

@vladislavpishiev3065

4 ай бұрын

Thanks for reply. I want to chrome plating headlight reflector, but it is plastic detail with high temperature and I need durable conductive paint. I think I found it now 😊

@cuforming

4 ай бұрын

@@vladislavpishiev3065 I can't give you any insurance about high temperature. The binder in this product will melt with high temperature.

@vladislavpishiev3065

4 ай бұрын

At high temperature I mean the temp that the headlight bulb created. I think it'snot over 70-80°C

@cuforming

4 ай бұрын

@@vladislavpishiev3065 I know that the maximum temperature for the binder is 50°C, but since it's mixed with graphite, the range could raise to 80°C or even more. This matter necessitate of tests in different conditions.

If is possible to use the copper powder?

@cuforming

2 ай бұрын

Yes, it's possible. Maybe you can lower the quantity, I've never tried with copper powder. You need to experiment a little.

@innar80

2 ай бұрын

@@cuforming I bought your recipe, I'll try using copper powder 😃

@cuforming

2 ай бұрын

@@innar80 Yes, I saw that. Thank you for your purchase. If you need anything, contact me on Instagram or Facebook, I'll be happy to help you. I just got some copper powder my self, I will make some test and see what happen. I'll be happy to share my experiment with you.

Agaclari seviyorum

@cuforming

3 ай бұрын

hediye çekilişi sonlandırıldı. satın almak istersen burada: shop.beacons.ai/cuforming/348be670-0eb4-4792-8854-54986e100666

Me love tree

@cuforming

2 жыл бұрын

Hey, go check my latest video for the giveaway!!!

Is the sealant you're using pellets of acrylic (same as plexiglass) dissolved in acetone? If so. That's a pretty genius method to getting a hard and durable coating impregnated eith graphite! I have a couple sheets of plexiglass from old displays, and was wondering what I could use the cut offs for, since I'd hate to waste them. Seems like a fantastic use for them! Keep up the good work 🫡👍

@cuforming

Жыл бұрын

Thank you for the appreciation. If the plexiglass dissolves completely in the acetone, that can be done. Some kind of acrylic or polystyrene usually don't get liquid, they only reach a gooy state.

@terrynoles8539

10 ай бұрын

Polaroid B-72, with acetone as a solvent works the best. This is what it was designed for, ie...sealing, adhesive, consolidation, etc. It is what is used with fossil preparation and conservation.

@mflipse

7 ай бұрын

@@terrynoles8539 And that is exactly what it is. Paraloid b-72 (not Polaroid 🙂). @cuforming This is not your invention, but you're selling the recipe like it is your own invention. I bought the recipe just to see what it was. Out of respect, I will not publish the % of the ingredients. Shame on you. And btw, use your own voice instead of an AI dubbed audio track on your other videos.

@terrynoles8539

7 ай бұрын

@@mflipse Yeah, sorry, Paraloid...my fingers got ahead of my brain for a bit.

@hsavidge

6 ай бұрын

@@mflipseCan you share the recipe with me?

Sızdırmazlık nedir hangi malzeme acaba?

@cuforming

8 ай бұрын

Tarifi burada bulabilirsiniz: beacons.ai/cuforming

"I Love Trees"

@cuforming

2 ай бұрын

Sorry, the giveaway was last year. You can buy the recipe from here: beacons.ai/cuforming

سلام ممکنه دو حلال گرافیت را نام ببرید ممنون می شم

@cuforming

Жыл бұрын

شما باید دستور غذا را از اینجا بخرید: beacons.ai/cuforming

Carbon dust + all type paint + lacquier = finish that simple why must buy recipe 😂

@cuforming

Жыл бұрын

Because carbon dust is not as conductive as graphite and lacquer and paint will isolate the current!!!!

I love trees

@cuforming

6 ай бұрын

Sorry, too late. You can find the recipe here: beacons.ai/cuforming

Love a Tree

@cuforming

2 жыл бұрын

Too late, sorry. If you wanna buy the recipe though, it's here beacons.ai/cuforming

I love trees

@cuforming

8 ай бұрын

Sorry, too late. You can find the recipe here: beacons.ai/cuforming

I love trees

@cuforming

2 ай бұрын

Thanks, but you are too late for the giveaway. If you are interested in the recipe, you can find it here: website.beacons.ai/cuforming

I love trees

@cuforming

Жыл бұрын

Too late for the giveaway. Sorry!

I love trees

@cuforming

Жыл бұрын

Sorry, the giveaway ended long ago! You can still buy the recipe from here: beacons.ai/cuforming

I love trees

@cuforming

Жыл бұрын

This giveaway ended long ago. There is another reward on another video. Check this one out and leave a comment there : kzread.info/dash/bejne/X3l1yKmSfLusiJc.html

I love trees

@cuforming

2 жыл бұрын

Hey, go check my latest video for the giveaway!!!