I'm so sorry I do not. It got dark and started to rain so I had to wrap it up. Take out those little screws Open it up, you may need a screw driver to pry, pry carefully as it is plastic, remove the old one, Incert the new one, reinstall small screws. Reinstall the unit into the car. It's just as tricky to reinstall as it was to remove. Careful not to break the plastic as it may be brittle, Careful not to screw up the heater core lines as they are fragile too. Other than that, it goes back together the way it came apart. Personal piece of advice from life experience. When assembling something with several nuts bolts or screws.... #1 start all nuts, bolts, or screws by hand A. To make sure they are not cross threaded B. To make sure both surfaces are lined up properly. Hand tighten then torque to specification.
@miguelmaldonado98817 ай бұрын
WE NEED PART 5 !!!!
@TACOMASRT5
7 ай бұрын
Thanks so much for watching! See my reply to the message above!
@JohnSmith-xx1lx Жыл бұрын
Where on Earth is the drain for this box? Having a really hard time finding it. Especially when it's on the vehicle..
@polymetric2614
Жыл бұрын
I was wondering the same thing. I believe he shows it in part 3: kzread.info/dash/bejne/mmyEmrqoc7vfm5M.html
@JohnSmith-xx1lx
Жыл бұрын
@@polymetric2614 I'm trying pausing in and zooming in I still don't see it.
@TACOMASRT5
7 ай бұрын
If you pause it at 22 seconds you can see it next to my finger😊
Пікірлер: 8
Got a part 5? Lol About to do this job now
@TACOMASRT5
2 жыл бұрын
I'm so sorry I do not. It got dark and started to rain so I had to wrap it up. Take out those little screws Open it up, you may need a screw driver to pry, pry carefully as it is plastic, remove the old one, Incert the new one, reinstall small screws. Reinstall the unit into the car. It's just as tricky to reinstall as it was to remove. Careful not to break the plastic as it may be brittle, Careful not to screw up the heater core lines as they are fragile too. Other than that, it goes back together the way it came apart. Personal piece of advice from life experience. When assembling something with several nuts bolts or screws.... #1 start all nuts, bolts, or screws by hand A. To make sure they are not cross threaded B. To make sure both surfaces are lined up properly. Hand tighten then torque to specification.
WE NEED PART 5 !!!!
@TACOMASRT5
7 ай бұрын
Thanks so much for watching! See my reply to the message above!
Where on Earth is the drain for this box? Having a really hard time finding it. Especially when it's on the vehicle..
@polymetric2614
Жыл бұрын
I was wondering the same thing. I believe he shows it in part 3: kzread.info/dash/bejne/mmyEmrqoc7vfm5M.html
@JohnSmith-xx1lx
Жыл бұрын
@@polymetric2614 I'm trying pausing in and zooming in I still don't see it.
@TACOMASRT5
7 ай бұрын
If you pause it at 22 seconds you can see it next to my finger😊