I am glad you showed assembly from boxing to finish.

@ACPro

Ай бұрын

Glad it helped!

Nice video! A couple tips - you assembled the bolts backwards for attaching the tongue to the front axle. The nuts and large washers are supposed to go in the back. The bolt heads may dent the axle tube and make the tongue loose over time the way you assembled it. Also, there should be a black plastic boot cap at the bottom of the handle tube when assembled to avoid metal-on-metal rubbing between the handle and tongue. That will also eliminate the slop in the handle.

I just got my 1200 lb cart, today, Christmas Eve, 2022. My box looked just like yours - a couple holes in it, no straps, my first impression of the tape was, someone opened the box and resealed it. I inspected closely for missing parts! Then, I inspected for damage. All I could find were a couple tiniest of scratches, that may or may not have been caused in transit. I had no straps inside, just some extra-long twist ties, similar to bread wrapper ties but heavier. Like yourself, I had it together in about 15 minutes. Like yourself, I was initially confused how the sides latched together. I'll echo Joefoley comment below, the bolts on the tongue should point to the rear, with the head of the bolt against the heavier metal of the tongue, and the washers spread the load of the nut over the thinner metal of the cross member. Nice video, I wish I had watched it BEFORE I put my cart together.

@ACPro

Жыл бұрын

Thank you for sharing

Thank you so much for this video I for Christmas😊 I got my son a gorilla cart.

@ACPro

Жыл бұрын

Nice he will love ut

I think the black plastic cover on the toungue is a bushing. Also I think the gates are on backwards they should drop and hang perpendicular to the ground.

Thanks Just bought one This’ll help But OSHA does not approve of exposed toes during assembling

@barryhunnel2420

2 жыл бұрын

screw OSHA and Let’s Go Brandon FJB!

@MMGDESIGNKING

Жыл бұрын

Lol

Thanks , I just got the 1000 lb cart same as yours . Mostly a toy for me . hope i can get some work out of it . I had to place large washers to each wheel to take the slop out . I did add oil to each wheel also '

@ACPro

2 жыл бұрын

Thank you for sharing

@twentysevenlitres

8 ай бұрын

The wheels have sealed bearings, they don't need oil. Washers are a good idea.

Bought one similar from Tractor Supply. A year or so later the tires were shot. no biggie. But! The races on the wheel bearings had done rusted themselves to the axle stubs. A 3lb sledge and a can of penetrating oil later.....I had three rims that survived. And! The really great news is that the part (wheel/tire) is discontinued! And it is some goofy hub length that NOBODY makes! I bit the bullet and ordered 4 new tires/wheels from Tricam Industries (GroundWork). C-H-E-A-P tires! I fully suspect a dandelion will cause puncture!

@Robert-ug5hx

2 жыл бұрын

That what I was looking to find out before ordering one I couldn't no flats to fit. That saved the trouble of ordering one

I got my 12k cart, and my box looked nothing like that; I guess it's the way Walmart works I can't wait to get my 14k one; it'll haul more store stuff

Hi I own the same cart my name is Lewis and I'm a gardener in San Jose CA now check this shit out, I've got the cart for x mas 2 years ago and the cart is my truck I have a motorized bicycle

@ronaldjerrimmy4659

2 жыл бұрын

To finish my story I connected the trailer to the bike and do all my gardening with it like load up lawn mower and other tools and dog and I go do a route really great cart thought I'd share that

@ACPro

2 жыл бұрын

Thank you for sharing

@GSSoulTV

2 жыл бұрын

@@ronaldjerrimmy4659 do you have videos of that

@Theunexpectedadventurer

Ай бұрын

@@ronaldjerrimmy4659can I see that like how did u attach it

Great video!

@ACPro

2 жыл бұрын

Thank you for watching

I do not like the yoke steering it is inherently unstable, bring back the car type steering where the wheels stay under the four corners of the wagon where they belong. Engineering wise it seems like we are moving backwards.

@ACPro

3 ай бұрын

Good call

Thanks for the video. I bought the groundwork cart from tractor supply and it is similar to the one you reviewed and it broker on day 2 and the replacement broke in the store the same way. The metal pulled apart at the weld. This appears to be better manufactured. Any gripes or complaints after owning for a few months ( like adding washers or design flaws?) Thanks

@ACPro

3 жыл бұрын

Only thing I would like better is for the powder coat to be thicker. Metal is alittle thin but for normal yard work it is ok.

@netxtown1524

2 жыл бұрын

I got tired of tripping over the tongue that wouldn't stay "up". I used a piece of 1-14" angle iron to extend the tongue out 8".

Would this thing drive well through lose gravel similar to that found by the railroad tracks? I have a yard full of gravel that size and beed something that's good at hauling about 500 pound loads through the gravel.

@ACPro

3 жыл бұрын

Loaded with 500.00 it would be hard to pull. If yoy pull it with at it would be ok but I couldn't imagine the tongue lasting long time.

That’s what they make sockets and ratchets for.

@ACPro

Жыл бұрын

Everyone has a different way . But as long as it gets done. Everyone is right. Thanks for watching

What is the size of the square tube pipe used in the front/rear axel as well as in the handle?

The size of this trolley please?

@ACPro

11 ай бұрын

Not exactly sure maybe 36 x60

Where did you purchased this cart ?

@ACPro

2 жыл бұрын

I hot this one from Amazon

I'd like to see someone use one. How does the axel move in the front? Is there too much play in the axel to convert it into a bicycle trailer?

@ACPro

2 жыл бұрын

Shouldn't be a problem. I'm not sure you want to drag it 30mph however

@jeremybenson5782

2 жыл бұрын

@@ACPro Would that be an issue with the bearings or the tire? What do you think about putting bike tires or something on it?

@jeremybenson5782

2 жыл бұрын

@@ACPro I wonder if a John Deer poly trailer could be converted. I pick seaweed for a living, and make good enough money for myself. But it's not a lot. Kind of like working in a store at minimum. I'm thinking of ways of cutting the pickup out while I'm still young. Poly trailers are like 100 lbl, but they could handle it for sure. The one in the yard feels like 2lbls.

@ACPro

2 жыл бұрын

@@jeremybenson5782 better off just building one. Take 2 old bikes from the dump and weld in mesh. Simple trailer and can do it free from scrap you can find at the dump.

What did it cost & where did you get it from?

@ACPro

3 жыл бұрын

This was around 200.00 and I think it came from amazon

@hmtrimworks7148

3 жыл бұрын

@@ACPro It must be a hot item… Everywhere I look they are out of stock

Theres a piece that fell off for the tounge so it doesn't have play

@ACPro

3 жыл бұрын

thank you

Can I hook it to my atv?

@ACPro

3 жыл бұрын

Should work well with at. Maybe use a pintel hook

Put a pair of boots on!

@ACPro

4 ай бұрын

Ok

Its 115 lbs

@ACPro

3 жыл бұрын

This wagon doesn't weight 115lbs.

Too bad the coating is so poor.

@ACPro

3 жыл бұрын

I agree

@barryhunnel2420

2 жыл бұрын

What do you expect! Came from Joe Bidens delivery service! LGBFJB!

Estás bien güey y ablas y pujas mucho

@ACPro

Жыл бұрын

Thank you

How tall is this wagon?

@ACPro

2 жыл бұрын

It's about 24"

@grandfresh9196

2 жыл бұрын

@@ACPro from the bottom to the base..