This helped me make the decision to get a GoPro as opposed to another action camera. I read mixed things about the ability to remove the overlay and probably would have gone with a different camera had I not seen this video. It's wild to me that GoPro doesn't tell people about the extensibility of the Labs firmwares. It makes this camera so much better! Thanks for the helpful video.

Nice. I was having some trouble with the overlay this weekend. Tomorrow, I will try this out.

Congratulations for your video and for sharing this knowledge friend, it was very useful for me here in Brazil!

Great mate! Years trying to find the way and that's it's!

A very useful tutorial, as I'm looking to use a couple of GP11's to HDMI output to a broadcast vision mixer and the last thing we need is the GUI staying on after power-up or popping up mid-broadcast. Hopefully, it will at some point be updated to be able to do this from the camera, without having to go throught the QR code rigmarole, but at least you've made it perfectly clear how to do it.

@EmeraldAudiovisual

Жыл бұрын

Oh. It existed in camera as an option. It was removed with the Hero 8 Black for who knows what reason. So Labs is the way forward these days.

Thanks so much for this !

Thanks, not sure why they got to make you got through so many hoops for something so simple.

wow thanks my friend

@maulii647

2 ай бұрын

😂😂😂 ich zieh mir grad nochmal dein VOD rein, wunder mich warum deine gopro an dieser Burg in Prag aufeinmal auf volles FOV switcht. Bei RTMP sind die settings ja fest eingestellt, will nachschauen ob das mit dem media mod anders ist und lande wieder bei dir... ich dreh mich irgendwie im Kreis. Aber danke für den geilen Stream mein guter, hoffe du bist wieder gut angekommen :D

THANK YOU !!!

thanks for sharing. I'm stoked they finally have a solution for this. so many headaches streaming out of the media mod.

@EmeraldAudiovisual

Жыл бұрын

The solution has been around a long while. It's just not very well documented. It's been on my TODO list a long time. Guess, I used the festive downtime wisely :)

I'm just leaving my comment here for a better search later - a great video, btw!! thanks!

Thank you!

thanks!

ty sir!~

note supported to hero 8 ? ( clear hdmi setting )

We are considering using a GoPro Hero 11 with Media Mod as a studio camera in a very small space - its wide-angle lens can get the view we need. With the Media Mod, can we monitor the GoPro's live video on a TV connected via HDMI even while recording? Or does the HDMI output only work for live preview (before recording) or playback? Thanks.

@EmeraldAudiovisual

Жыл бұрын

There are a few things to consider: - yes, you can output the GoPro feed to a TV and it will show the footage, while recording, but the GoPro Hero 10 and 11 have a bug, where it defaults to 480p60, when you record. The GoPro Hero 9 does not have that bug. I made a video about this here: kzread.info/dash/bejne/eZV5pMtvhNebYto.html . If you record at greater resolution than 1080p, then it will always default to lower resolutions on the HDMI output. What resolution it will output is listed here: community.gopro.com/s/article/Media-Mod-HDMI-Output - additionally, once you connect something to the HDMI port (be it a capture or a TV or anything else), the GoPro switches off it's rear screen and only shows a "HDMI" logo on the front screen. So you can not view the back of the GoPro anymore.

@RiteSongStudios-bz9sz

Жыл бұрын

@@EmeraldAudiovisual Super helpful. Thank you!

@EmeraldAudiovisual

Жыл бұрын

Little update on the Hero 11. I wasn't actually aware of this: GoPro have updated the Hero 11 to now output 1080p30, when recording 1080p30 or 1080p60. And it will actually output true 1080p in idle. The link I provided above with the MediaMod HDMI output modes has been correctly updated.

Is there a way to disable the overlay using the Quick App? I have two Gopro 11 beneath the roof in an Arena and they are not easily accesible.

@EmeraldAudiovisual

7 ай бұрын

No. There is not. You either do it on the screen every single time you turn on or replug the HDMI cable or you install the Labs firmware and disable it permanently as per my video. The Hero 7 was the last one to have a setting in the menu to disable it.

@mzgskater

7 ай бұрын

@@EmeraldAudiovisual okay, that is quite unfortunate. Thanks for the video, I will try it out. Are there any downsides using the labs firmware or is it just additional experimental stuff on top of the usual firmware?

Hi, I'm entirely new to GoPro so thanks for this helpful video! I am struggling to get the HDMI out to work at all, before I do the update/QR code. I have the micro HDMI from media-mod going into basic HDMI USB-C capture device, then into OBS - but I am getting no live video at all (I have tried 2 x brand new capture cards in case it was that). Should the camera automatically send video?.. I was a bit confused about the media mode and button presses to get video to screen. Any tips or instructions would be hugely appreciated!!

@EmeraldAudiovisual

Жыл бұрын

Try connect your GoPro to a TV first. Just to ensure, it is not your Mediamod or your HDMI cable.

@mikebedford572

Жыл бұрын

@@EmeraldAudiovisual Thanks - tried that, no output from camera to TV. I tested the HDMI capture device (4K USB Mirabox) and that works with another HDMI source fine. Seems there must be a setting on the GoPro - I factory reset it. Is there anything you know of that needs to be set on the camera or a particular procedure apart from what is shown in your video?

@mikebedford572

Жыл бұрын

Ah, it works!!... seems that there was a specific sequence - inserting into mod when powered off, then HDMI, then power-on... now onto implementing your super-helpful clean HDMI feed tip. Thanks again

Before trying this, I confirmed our output of the GoPro to a monitor via HDMI. Once I loaded the labs firmware and selected the clean feed, we no longer get a video feed. I did a factory reset and still no feed at all from GoPro to monitor. Any suggestions?

@EmeraldAudiovisual

Жыл бұрын

Which version of the GoPro ? Also, you can always go back to the normal firmware, if needed, but that obviously would defy the purpose.

@Bubbles_Axolotlbro

Жыл бұрын

@@EmeraldAudiovisual Hero 11 black is our GoPro...I went back to the normal firmware and did a factory reset once I loaded the normal firmware just to check but still no HDMI feed at all to a monitor. The feed was there when we unwrapped out of the box. We will try another cable as well but didn't know if you had any other suggestions. Thanks for the reply!

@ROYALPRIX

5 ай бұрын

Same here with a 9. Insanely frustrating. Regretting my purchase for streaming. Not recommended.

Hi, do you know of a way to output in 4K via the Media Mod HDMI with a Hero 11 Black? I bought a Media Mod for precisely that reason, to playback 4K directly on a 4K TV and found out the Media Mod caps the output at 1080p, unbelievable...

@EmeraldAudiovisual

Жыл бұрын

The GoPro (all of them) is not capable of 4k output on HDMI. Here are the resolutions, that the MediaMod can output on HDMI, based on what resolution you have set your camera to: community.gopro.com/s/article/Media-Mod-HDMI-Output Maximum is 1080p. And the higher your recording resolution, the lower the resolution for the HDMI.

@thekidthatshoots

4 ай бұрын

May be better off using a card reader and plug it into the usb slot of the tv and you can watch that way. It’s worked for me.

Hello, congratulations for the video, I'm watching it here in Brazil. I didn't quite understand the table on the GoPro website and I have a question: with the GoPro 9, when turning on the media module, if I set the video to 16:9, full hd with 60FPS I will be able to have that same resolution in a live streaming on youtube? I'm going to buy a GoPro that will be used a lot for live broadcasts and I'm in doubt between the Black 8, 9 or 10 versions. Thanks.

@EmeraldAudiovisual

Жыл бұрын

Not quite. You will have a 1080p60 signal on HDMI, but it's 1080p30, as every second frame just is duplicated. This is the case for the Hero 7, 8 and 9 and not documented in the table, but a known "feature". For the Hero 8 and 9, there is a workaround, that you can start recording (while using HDMI over the MediaMod) and then you will get actual 1080p60.

hi can you confirm you can still use the Go pro Quick app for thi Firmware

@EmeraldAudiovisual

Жыл бұрын

Yes. The Labs firmware is an official GoPro firmware, it just adds experimental features. The GoPro Quik app will work the same way as before. Just make sure, not to firmware upgrade your camera from the Quik app, when it offers that, as that will bring you back on a standard firmware.

@carlmanalac1620

Жыл бұрын

@@EmeraldAudiovisual thanks. will try this. as we need the clean hdmi and usb trigger for our church livestream

At what resolution does clean HDMI output? Thanks

@EmeraldAudiovisual

Жыл бұрын

That depends on what GoPro you have and what resolution you have set it to. GoPro have a chart here: community.gopro.com/s/article/Media-Mod-HDMI-Output

@IsaacRC

Жыл бұрын

@@EmeraldAudiovisual oh sorry didn't know that specs where public, thanks a lot!

When I plug the micro HDMI cable into my GoPro 11 Media Mod, the screen goes black. Why is that? Thanks!

@EmeraldAudiovisual

Жыл бұрын

You mean the screen on the GoPro ? That's normal. It does not have the processing power to drive both the screen on the back (and front) + HDMI. It's either/or. That's been a limitation with GoPro since at least the Hero7, if not before.

@timhullfilms

Жыл бұрын

@@EmeraldAudiovisual Okay, thanks. I just started looking into this. The front screen is on. How do I switch the screens? Thanks for the help! :)

@EmeraldAudiovisual

Жыл бұрын

@@timhullfilms You can't. It's on, but all it shows, that you're using HDMI. Literally: GoPro's only do the internal screens or HDMI. Can't have both.

@timhullfilms

Жыл бұрын

@@EmeraldAudiovisual Nah, I found the answer here. Thanks anyway. I subscribed.. great video! kzread.info/dash/bejne/Yq6GuttqdqrclqQ.html

@EmeraldAudiovisual

Жыл бұрын

@@timhullfilms That is, when you have the stock firmware. My video is, how you don't have to go through these steps using the Labs firmware. In both scenarios, you don't have the use of the front and rear display of the GoPro.

Now they make usb-c to HDMI cables. Cheap.. Would that even work??

@EmeraldAudiovisual

Жыл бұрын

No. Because the GoPros solution is proprietary. To use a USB-C to Display Port or a USB-C to HDMI cable, the device you connect it to has to have full support for that. The GoPro does not.

Hello, Does the main display on GoPro active simultaneously while HDMI out in use?

@EmeraldAudiovisual

2 ай бұрын

No. The rear display goes off, once you plug a HDMI cable in. That's always been the case on all GoPros.