Who else is yelling at the screen?... "Noooo, stuck open, OPEN!!!" Thank you, excellent advice!

@babyscorner2023

2 жыл бұрын

ME!! LMAO!!

@GMoney-B

2 жыл бұрын

Uhhhg seriously! Haha. I was triple checking what he said too. 🤣

@johnsonjay60

2 жыл бұрын

Yes!!! And inducer motor 😆

@brendanb6078

Жыл бұрын

Well, the switch was stuck open because the port was blocked (closed). Easy enough to mix it up while narrating.

@larrycole1991

5 ай бұрын

Thank God I'm not the only one, 2 flashes open, 3= closed... Pay attention to details! Either way about to try this lol

This man is still saving lives 5 years later.

@akhaqan

6 ай бұрын

Glad to be of assistance

Thank you sir, so much! My family isn’t going to be cold tonight because of you. You are very much appreciated by this little family 🙏

Woke up to a cold house this morning & after searching for over an hour & trouble shooting other things I came across this video which was my exact problem. You saved me 100s on repair for something so simple. You are awesome...thank you!

Yes! Checking in from the Great Texas Blizzard of February 2021. After hours of troubleshooting, found this video. Took a straighten paper-clip down the connection fitting and felt a little blockage right away. A couple of pushes later it was unblocked and now everything works perfectly. Thank you thank you thank you.

You just saved me a whole of time,money and headaches...I checked everything...I by passed it and nothing, checked all my other components..I even replaced the board.....I did what u did and sure enough I heard a click and then the flames.....thank u so much!!!!! Just in time for this cold weather in Texas...

Oh my god. My dude. You saved my family from another cold winter. We didn’t have heat last year because we couldn’t afford to pay HVAC to come fix our heater. We live in San Diego county, so it’s tolerable with a few space heaters, but after finding your video I fixed the problem with duct tape. My hose had a tear. I will pick up a new one next time I’m out. Thank you, SO much!

Thanks... AGAIN!!! I had this same issue Christmas Day and ordered a new switch which took a week to arrive. After putting it in the issue remained. PISSED, I began a new search and found this clip and resolved my issue with a twist tie. The problem showed itself again a few days ago and Inspected my system today 1/21/21 and tested the switch & the hose but did not check the induction motor connection UNTIL I across this clip,. again. Oddly enough, the same twist tie was on my desk and in a few minutes the issues again resolved. Clearly something is loose inside the induction motor that clogs that line. I wonder how much money has been paid to have someone complete a simple fix.. THANKS VERY MUCH!!

My kids won't wake up to a cold house again. Your video was easy to understand and follow. Thank you!!!!

@akhaqan

Жыл бұрын

You are so welcome!

Coming to you in 2023 from another happy homeowner! This was exactly the fix I needed and now the house is getting toasty warm again! Thank you for sharing!

@akhaqan

Жыл бұрын

Great to hear!

Thank you! I bought a new airflow switch, but it ended being clogged. Thanks to your video, I fixed my furnace!

This was exactly my problem. You solved it. I’ve asked God to bless you where ever you may be! Thank you!

@mendoncabeast1

5 жыл бұрын

Yes God bless him

I replaced the pressure switch and was still getting the 3 flash code. Found this video and cleared the induction valve where the rubber tube goes and it fixed the problem! My furnace is working and heating up the house again! Thanks a million. If you're ever in Delaware hit me up, I owe you a few beers lol

@akhaqan

3 жыл бұрын

I am glad it helped you, will take the rain check on your kind offer!

Exactly what the problem was with mine. Had to take the motor off and use a 1/16 drill bit to drill it out it was so clogged. Thanks man! Furnace working like a champ again

My wife and I froze last night, and laying down in the warmth due to your help. Thank you, sir! Cheers to your health and good fortune.

@akhaqan

7 ай бұрын

Thanks a lot, I am glad the video was helpful

Today the outside temperature is 20 degrees F and I came home to a freezing house. I watched your video and then checked my furnace and see the red light flashed 3 times. I cleaned the port hole on the pressure switch and the port hole on the motor and put the hose back on. The heat came back on afterward. If I called heating services the cost would have been $300+ easily and the mechanic would take less than a minute to fix it. Thank you.

@akhaqan

Жыл бұрын

Thanks, comments like these make my day, when someone is helped.

My friend!!! Thank you you have helped me!! I bought a new igniter but my furnace still didn't work but you! Thanks to your video I found that blocked hole , cleaned it and it works!! You saved me couple hundred dollars! And this is on the York furnace , different but works in similar way.Blessings to you.

Worked like a charm...in my case, the tube had collected enough condensate to prevent air from moving through. I simply disconnected the hose, drained the small (but enough) amount of water, and we're back in business. Thank you so much!

Thank you so so much. I was pulling my hair out looking for how to fix this. You were by far the best at explaining this and solved the problem! Much thanks to you. I thought this was an easy fix and it was.

You are a life saver, this is exactly what happen, just a quick tip when you guys do push a metal wire through the orifice remember to push it hard and you will find that it goes through a little further, just in the cases where debris is piled up.

Amer, you are a Rockstar. I have a Coleman and I had the same blocked valve that I used with a mini screwdriver to clear out. You saved me another night of freezing slumber!

Thanks so much. I checked the hose, but the wire/paper clip in the induction nozzle ...”Eureeka” ...that did the trick. Save me mucho money and mad the wife very happy to have heat again. Thanks again!!!

This was my problem too. My fan port was blocked with some real heavy corrosion, and I had to remove the fan+housing and hammer a 1.5mm allen tool through the port to remove the blockage. I put it back together and it's working like a dream. Thank you for this video!

Nearly 2 years later, Still helpful Thank you Good man!

This fixed my issue! I will forever be thankful my friend. If you're ever in Wisconsin I will buy you a beer or two! Thank you!

Sir, you are AWESOME! Thanks for sharing this video, for the last two years I have been having this issue. Some company wanted to charge me $400 to change the board, today, before seeing this video. I went upstairs to check and noticed the 3 lights and Google it, I took the hose out and blew into it to get rid of any dirt/dust and also bang the pressure switch lightly and my heater started to work. After looking at your video, I will use a small wire to unclog that nozzle where the hose goes into.

Wow, thank you so much. It worked and saved myself a lot of money. Was worried since it's 5 degrees Fahrenheit in Chicago right now and was freezing didn't know what was wrong with this Goodman furnace. You're amazing!!!!

Thank you! You saved me a few hundred right before the HVAC technician was going to come out.

@akhaqan

Жыл бұрын

Excellent!

Thank you! I was able to fix my furnace this way as well. In the canadian cold, you've saved me a very uncomfortable few days. thank you!

Great video - smart troubleshooting! I was getting the 3 blinking lights too, but that was a correct system response in my case. My problem was low pressure because the exhaust flue hosing was not attached firmly to the fan housing. I set it firm and flush. No more blinky lights. I'm warm and comfy now.

Thank you! I didn't think the issue would as easy as you made it look, or even be the exact issue. I appreciare your help and expertise, also your willingness to share the fix. I will be keeping a pipe cleaner in the furnace room now!

@akhaqan

3 ай бұрын

Glad it helped!

Absolutely fantastic video!!! I was scared to death and didn’t know what was going on, and I watched your video, did exactly as you, and voila!!! It’s fixed and the green light is back to normal. And I’m toasty again! I have a Comfortmaker furnace :) I liked and subbed!

Thank you so much...I just called out of work because no other videos were helping me, but when I got to yours I couldn't even find so much as a Bobby pin to clean the little hole. Luckily it's a bit after Christmas and there was some type of twisted tie under my bed and it did the trick...I yelled so loud when the heat kicked in again. About to get ready and go on in to work...thank you so much again

@akhaqan

5 жыл бұрын

You are welcome!

I had the same error code, same problem, same resolution. Thank you! Saved me having to call a tech.

11 degrees outside. Downstairs unit running more than normal and not really keeping up. Cold breeze flowing down from upstairs. Upstairs furnace won’t light. Watched your video and used a 1 cent twist tie to unclog the tube. You saved me time and a lot of money. Thank you so much for taking the time to make this video and sharing it with others! Very much appreciated!!

@akhaqan

6 ай бұрын

Its comments like these which make my day, I am glad I was able to help.

I have been struggling for many days and it solved my heating issue like a charm. Thank you

Wish I found your video 3 hours earlier, it worked. Thank you!

Thank you sir, you saved me hours of troubleshooting. My air way was not blocked but I believe the switch itself had grit in it or something. I ended up rapidly putting positive and negative air pressure in the tube while attached to the pressure switch to actuate the little flapper switch inside the housing. when I heard the clicking I reattached the tube to the fan and a warm house I got.

Bro! You saved me lots of money. The blower connection to the tube was clogged up and just used a paper clip to unclogged it and voila furnace working again. I love you all on KZread for helping us with repairs. Thank you so much!

@akhaqan

Жыл бұрын

Glad I could help

Oh my gosh thank you sooooooo much!!!!! Because of Covid-19 I had to try and fix my own furnace and your video was exactly what I needed. Thank you from the bottom of my (warm) heart!!!!!

This video was fantastic and Heaven sent. I followed the instruction to the T and it worked. Such a blessing 🙌🏿. Thank you my friend

Thanks. Just what my furnace needed. After 1.5 hours of watching videos, this solves the problem.

@akhaqan

Жыл бұрын

Most welcome

So I've watched a few videos and this one explained my problem exactly how it was happening. I did exactly what you did and it worked!!! The last I had this issue the repairman charged $300 to do this. THANK YOU! THANK YOU! THANK YOU!

WOW THANK YOUUUUU even 4 years later you just helped me out! it's 1:30 am in the morning and was digging in my furnace trying to figure out the issue and ran into your video. you literally had the exact 3 flash error i had and the exact furnace i have. i hope karma keeps building up for you! you have my thanks! my family can now warm back up from this 25F degree weather!

@akhaqan

Жыл бұрын

Fantastic! Glad it helped

Thank you sooooooo much! This fixed my furnace today. Only five minutes of effort and all is well. 😁

THANK YOU SIR! I used a paper clip to open the hole AFTER I bought a new pressure switch. THANK YOU sir for the Great Christmas gift!

AMAZING! Fixed my furnace. Thank you for taking the time to make this video!!!

Sure enough it was the port on the draft induction fan that was clogged on mine too. I thought for sure it was a bad flame senor. Thanks, you saved me a very expensive repair bill.

Thank you! This fixed my problem. May the Lord bless you and your family!

You my friend are a gentleman of scholars and many gifts. May the gods give you many more! Thank you so much kind sir!

@akhaqan

Жыл бұрын

Most welcome and thanks for the lovely words

Thank you kind Sir, I blew into the tube which cleared out whatever it was and now my furnace works.

Thanks for posting this! This turned out to be my issue and fixed my heating problems tonight!

Thank you, Thank you. You were a life saver here. We place a cover on our air intake due to a prior bee problem. We completely forgot to remove it.... this video reminded us. Otherwise we would have been paying a respnse fee from our local heating company.

I give credit when credit is due and I would just like to thank you for the simple solution to a problem that would have probably taken me forever to diagnose. Great job and thanks again!

Thanks alot. Saved me a service call and $. I used a paperclip.

Thank you Amer. My furnace now works.

Thank you thank you. It took 5 minutes and I know nothing about this stuff. This worked

Thank you so much man! Spent $125 on a new blower motor and igniter because idk wtf I'm doing lol this fixed it!

This video saved us from a cold night. Simply amazing!

@akhaqan

Жыл бұрын

Glad it helped!

It fixed my problem! Thank you very much! God bless you and your family!

Wow you are the best. That really fixed our Heat unit. Thanks a lot.

Same as others, this was my issue and it fixed it perfectly. Thank you!

This solved for the problem for me. today. I appreciate you recording the video. I was able to solve it within 2 hours. Thank you!

Thank you for this!! We're coming into a cold snap here in Indiana, We have an older style Goodman and it was acting weird, 3 blink code, cleaned the ports out, checked the hose, turned on and we have a warm house again. Ordered a new draft inducer and pressure switch just to be double safe, but it should get us through until the new parts show up. Thanks for this!!

@akhaqan

Жыл бұрын

Glad it was helpful!

Fixed my issue today. Saved me hundreds of dollars. Thank you!

Thank you for posting this video. I was getting the same error code. The problem was the tube had water in it. Now all is good. Thank you,

Thanks for sharing this!! It wasn't my problem but gave me ideas that saved me money! You rock!

You completely and utterly rock for making this vid. My son called me about his heater and he had this exact problem. We did what you said and it fired right up. Thank you, very much, sir, for making this. 🙂🙂👍👍

@akhaqan

Жыл бұрын

Glad it helped

It fixed my problem. Saved me a service call. Thank you

Had AC fixed ober the summer. Its getting close to winter and it wouldn't heat. That guy didn't fix the black tube. Thanks so much. Hooked it up and have hot air again

@akhaqan

Жыл бұрын

Glad it helped

Like everyone has been saying Thank You!!! We've been without heat for five days waiting for this part to come in.The part came in didn't work. Watch your video and five minutes later we got heat.

@akhaqan

5 ай бұрын

Most welcome

Thank you! You saved me some $$. This actually worked and the heater is working better than before lol.

Thanks this fixed my problem in no time. Very informative 👍🏼👍🏼

This saved our family Christmas today! Appreciate you taking the time to make and post this video!

@akhaqan

7 ай бұрын

Glad I could help!

it works. your videos is really very helpful. thanks a million for the tutorial. really appreciate it. I just remove the rubber that connects to the pressure switch. blow into it and reconnect it and viola it is now working.

Just fixed furnace at 4AM when it’s absolutely freezing outside. Thank you!

@akhaqan

8 ай бұрын

Glad it helped

Yup!! Great video and this was exactly my problem!!!

This fixed my furnace too!! Easy fix!! Thanks for posting.

Damn man, its 1:56 AM here and our furnace stopped working. Your video was exactly the problem. I can not even begin to thank you enough for this video. You saves us big time.

@akhaqan

7 ай бұрын

Glad it helped

This was my problem too. And I needed a new pressure switch. In order to not freeze while waiting on the new one. I had to keep going in there and giving it a shake and tap. Also repositioning it helped too. So don't get stuck frozen overnight. Fool with it until it works. And when the new one arrives. Pop it in

Thank you. Your simple instructions made it easy to fix. My heat is working just fine.

@akhaqan

Жыл бұрын

Great to hear!

It was my problem and your solution fixed it. thanks a lot.

Thank you sooooo much! This video saved me a lot of $. God bless you!

@akhaqan

5 жыл бұрын

I am glad it helped you

Your video got me up and running... thank you so much

Thank you, thank you!!! That fixed my issue, and I was wracking my head over it.

This video helped me tremendously, thanks man!

@akhaqan

5 жыл бұрын

I am glad, thanks for the feedback

Thanks for the video! Spot on! How could you give this a thumbs down?

Awesome! Thank you Amer. I have heat again thanks to you, my friend. I am very grateful. Thanks again! -Johnny

@akhaqan

5 жыл бұрын

Most welcome!

Thanks for the video. Same code stuck open, replaced pressure switch same issue. Cleaned the opening to the motor. Problem solved, thanks!

Thank you very much for the well-explained video, it helped a lot . 🙏🏻

Perfect diy! 25 degrees today and furnace wouldnt start. Did same thing and bingo!!

Amazing Tip and Trips. Had the same issue and Cleaned out my sensor and worked on the first try! Thank you so much for putting this video up!

@akhaqan

Жыл бұрын

Glad it helped

You saved my life and sanity! I was literally in tears.

Thank you! Its -10 and I didn't have heat. You literally saved my life!

Thank you for your video. Confirmed my issue and resolution!

Thank you so much Sir, that fixed me furnace.

Thank you! This was the exact solution for my chilly house. Saved me having to make a service call.

@akhaqan

Жыл бұрын

Glad I could help!

Good video! Just want to add a couple of things. The pressure switch actually works on negative pressure. The inducer blower creates slight vacum that triggers the switch . Do not blow or suck on the tube if one end is attached to the pressure switch. That can damage the membrane inside the switch.

@akhaqan

4 жыл бұрын

Thanks. I think it works on positive pressure since the tubing off take is from the periphery of the blower where it is discharging air hence positive pressure. Had the tubing off take been on the eye of the impeller, it would have been negative pressure.

@amarinayat8879

4 жыл бұрын

@@akhaqan All the ones that I have come across that are attached to inducer assembly were suction type (negative pressure)... dont know if there are some that work with positive pressure Also check the following out: www.thespruce.com/how-to-test-furnace-pressure-switch-1824742

This saved me quite a few dollars, much appreciated. Wife is happy and we have heat, win win situation!

@akhaqan

Жыл бұрын

Glad it helped

Thank you brother you saved me a lot off money I fixed it by myself 👍👍