Exactly what I am looking for. How long have you had this specific setup and how is the foam holding up?

@trpl_bgy

3 ай бұрын

Installed the Foamboard 6 months ago, 11/10/23. I measured with a tape measure last weekend before the video and if there is an amount of compression at all it is not measureable for me on my tape measure or naked eye. Internet told me :) - "A 200 pound man standing on both feet exerts about 2.78 pounds per square inch (psi) of pressure. Standing on one foot, he exerts about 5.56 psi of pressure." 1.5 Foamboard is rated to withstand 15-25 PSI. So having 1/2" foam/rubber + 3/8" turf I was betting that the load would be spread enough to not affect it. I figured if it did effect eventually it would be easy to replace or redo. So far, I'm extremely happy with it and becaue of that.. I put out the video :)

@jordangoracke1430

3 ай бұрын

@@trpl_bgy Makes total sense! Why didn't you go with a traditional 1/2" plywood versus the rubber top EVA foam? This would have saved a lot more money. Did you just want the softer feel? Love the setup, just curious.

@trpl_bgy

3 ай бұрын

@jordangoracke1430 great question. Was really an order of operations limitation lol. Already had the floor in before ever decided or considered going this route. It is nice and soft and the tiles link together very “flush” to one another as well. But not sure this is exactly how one would draw up starting from scratch. Mostly wanted to put out an example of the use of the foam panels as I haven’t seen anyone try it and was sure others were wondering like I had. I searched and searched for someone who could tell me it worked or didn’t but never found. So thought I’d play guinea pig here and try it. I should add, the ball bounce is greatly reduced and it the combination of the layers seemed to absorb sound, just felt slightly less loud after install

Awesome set up and thanks for the step by step instructions. This is just what I'm looking for to start my own setup. Thank you.

thanks for the insight

@trpl_bgy

3 ай бұрын

My pleasure! Thank you for the comment!

Another great video. I’m stealing your idea for the k2 tee hook. Love it.

@trpl_bgy

3 ай бұрын

Originally was going to cut that but now I’m glad I left it in!

@schop

3 ай бұрын

@@trpl_bgy how many different size teas do you have out?

@trpl_bgy

3 ай бұрын

@@schop typically try to get by with 2, 3 at most. When I play solo I use just one #6 tee. Common is a #1, #5, & #6

Thanks for the video. I’m still in planning stage and already purchased an sig pro softy hitting strip only and was going to build up everything else like your video including the hitting area for a clean look. Do you think this will work and hold up for a hitting area as well as putting area? Thanks

Good video! Thanks for all the help yesterday, come to find out my pc build did not have bluetooth for the MLM. I ordered an adapter and I'm going to build a faraday cage for the projector. I'm hoping it will help with all these "ghost shots" I get.

@trpl_bgy

3 ай бұрын

You're welcome! Glad when I can help. Stay in touch as you come along. Questions always welcome!

Great video! Where did you get the turf from? And can you buy it in one big peace?

We have built a 9 hole course in our pasture. We are currently running some as sand holes and some as AstroTurf from some that was being tossed (75% sand / 25% turf). Do you have any recommendations for outdoor rubber or setups that would work outside?

Great video. What mat are you standing on. Looks like it takes traffic well. I noticed your hitting insert showed wear but where you were standing didn’t. I’m using cheapo depo putting green material from Home depot but it’s wearing down from my stance. Looking to do something that will not need to be replaced every 6 months

@trpl_bgy

3 ай бұрын

So that is the "Stance Mat" portion of the SIG Pro Softy hitting mat. I had gone through two $300 mat's from local sports store and decided to invest in something more professional because of reviews. It's exremely durable and the hitting strip on the SIG Pro Softy hitting mat is relpaceable. I would recommend the purchase to all. Its been great on my joints and the hitting strip is 7 months old now and I don't plan to replace soon. SIGPRO Softy Golf Mat - amzn.to/3vxM7SA

New sub here. I have the SigPro Softy. It’s amazing and I love it. My issue is that it’s to thick and with garage height being at a premium (8’4”) I have to go get a Monster Mat, just because it’s not as thick. Great video!

@trpl_bgy

2 ай бұрын

Thank you for the sub! Appreciate it very much! Might be a silly question but Can you modify ceiling at all? Is there joist or attic space above?

@bougie_kenny

2 ай бұрын

Unfortunately, I can’t. I’m in a new build townhouse. Would have loved to have Been able to use a wall mount opener, but don’t have the corner clearance.

What projector are you using..Thanks

What size is your hitting bay?

Off topic but, do you have a tutorial on setting up webcam putting with the new direct connect bluetooth connector for the MLM2PRO? I never had putting setup but have the facilities for it now so I am trying to figure it out.

@trpl_bgy

3 ай бұрын

By popular demand I think I'll put something together here soon for this. :) *Note: It will be same as set up on the OCR Springbok Connector and I have videos on that. But the settings will apply the exact same to Duwayne's Bluetooth Connector*

@kodycooper1034

3 ай бұрын

@@trpl_bgy appreciate it! what do you download to get the putting? It's not built in to the BTC is it?

@trpl_bgy

3 ай бұрын

@kodycooper1034 it’s built in. Just needs to be turned on in the settings and it will pop up when you switch to putter

What PC do you currently use?

@trpl_bgy

3 ай бұрын

CUSTOM BUILD Case: PC-O11DX 011 DYNAMIC ATX Mid Tower Gaming Case - amzn.to/4cL5FDS Motherboard: ROG Maximus XIII Hero (WiFi 6E) Z590 LGA 1200(Intel®11th/10th Gen) ATX - amzn.to/4cBsEku Processor: Intel Core i9-11900K - amzn.to/3TO4YRk Graphics Card: GIGABYTE AORUS GeForce RTX 3090 Xtreme 24G Graphics Card - amzn.to/3VM0Oft Memory: G.Skill 32GB DDR4 TridentZ RGB 4000Mhz PC4-32000 (4 x 8GB) - amzn.to/43JJz0m Storage: (2) Samsung 970 EVO Plus SSD 1TB NVMe M.2 - amzn.to/4aqBnVd CPU Cooling: Thermaltake Floe DX 240mm CPU Liquid Cooler - amzn.to/49oMGfn Cooling Fans: (9) Thermaltake Pure 12 ARGB 120mm Fans - amzn.to/3PKzD0U Power Supply: Thermaltake Toughpower PF3 ATX 3.0 1200W 80+ Platinum Full Modular - amzn.to/49sVW1U

Do you have material list?

@trpl_bgy

3 ай бұрын

incomplete but close in the Description. If have any specific questions feel free to ask :)