GoKart Ep.2 - replacing corroded frame tubes
Автокөліктер мен көлік құралдары
With the jig made in the last video we can make a start replacing some of the corroded frame tubes, not too difficult a task with a good pipe bender & one by one they are replaced sucessfully - here's how we did it...
Enjoy
Andy
Thanks for watching, producing these videos does cost a great deal of time & some money too. I'm hoping you found this & other videos on the channel entertaining/helpful if you did then maybe you'd beable to send over a dollar or two to help support the channel so we can keep doing what we do best. If not then you can help in other ways - why not share the video you enjoyed on your facebook or other Social media platform - it's amazing how one single post can then be shared causing a sudden surge in views!
Here's a link to Mrs Mechanic's new KZread channel, you'll see lots of behind the scenes videos & also her epic ride down the full length of New Zealand on a tiny Honda Monkey motorcycle - off road!!
/ @onelittlelady
Now, remember, you can get your dirty hands on the new Andy Mechanic Merchandise through the new Andy Mechanic Zazzle store, just click on the link below:
www.zazzle.co.nz/store/andyme...
Also, if you’re keen to get an embroidered work shirt or jacket then visit:
andymechanic.uniformnz.com/
Both Zazzle & UniformNZ can ship to anywhere in the World so if you are far far away then just email them for a quote.
You can also become a Patron to the Andy Mechanic KZread channel. Patrons get special access to up and coming projects, future info about the channel & of course background info on the Tool Girls too! Here’s a link:
www.patreon.com/Andymechanic
If you'd like to send something through by post - a letter to be read out in the 'Mail Call' videos or maybe a parcel containing a surprise for your favorite Tool Girl, maybe a new tool for us to use in a video or a KZread channel sticker for the cabinet door or toolbox then you can send it here:
Andy Mechanic KZread channel
PO Box 6265
Victoria Street West
Auckland
Post Code 1142
New Zealand
You'll be sure to get a shout out on one of the videos too!
….or just flick me an email: andymechanic@live.co.uk
Thanks for all your support, until next time...
Andy
Пікірлер: 9
Hallo Andy and team
Back on the tools!
I have a 12 ton one of those pipe benders, had it since the late 90's it has bent two inch 3mm wall and just this week I have been bending scaffold poles to make a tent for a tractor without any problems and scaffold tube is 48mm dia with 4mm wall. Best to lay those benders flat on the floor to use them and chal the bend angle you want onto the floor also bend a piece of 6mm rod to the correct angle and sight up the tube between the line and rod, check your spring back as well as the tube will always spring back a bit so you need to go a tad over but not too much.
Frame does appear to be over built! Some good tips in this, especially the clamped angle piece used to line the tubes up. I did have to watch through my fingers on two occasions though.
@AndyMechanic
9 ай бұрын
Lol!
@bananabrooks3836
9 ай бұрын
@@AndyMechanic l didn't realise until the livestream, that its gonna have two adults sized kids on it!
@AndyMechanic
9 ай бұрын
Lol! Just one adult at a time!
@bananabrooks3836
9 ай бұрын
@@AndyMechanic Oh, l misunderstood then.
That's some heavy built go cart with tubing that thick. Not made in china 😂