Now I know why you're always in the shop, if I could make awesome projects like you do .I'd be in the shop all the time to .

We love RBG!

@RedBeardsGarage

Жыл бұрын

We love you! Thanks for the support.

14:24 that look clean dude, nice work!

With a cnc plasma table and a machine lathe, the possibilities are now truly endless. Congratulations! You are living my dream. I applaud you. Thanks for sharing it all with all of us.

Project looking good

Too cool

Cool dude like the build.

Brother Red beard I’ve been sending you massages needing your help with my mule project. Original motor no good took out gone..I’ve been trying to upgrade to another motor at the moment I have a 16hp DuraMax electric start but my problem is the motor turns the opposite way from the Kawasaki differential braking my dead on taking the differential out replacing it with like you did on one of your videos dammit but you make it look so damm easy I were wish you were down the street anyway I’m still going forward viewing over and over again you’re video thanks

Every time I watch your video I want to come and help you. Makes me wish I was young again and I had a man to show me the ropes just like you. i WENT FROM BEING A MACHINE OPERATOR TO A GAS PIPE LINE WELDER AND IT TOOK A TOAL ON MY BACK AND WATCHING YOU I CAN SEE A EASIER WAY.

That will be an awesome high reliability ride! The entire powertrain is built like a tank, but stil easy to service. Nice!

It looks absolutely fenomenal, you sir, are an artist

🔥🔥🔥🔥🔥🔥🔥

Great job👍 can't wait for the next round

Amazing Job on it all but the exhaust is spectacular job great fabrication work

Gold in the engine bay, so basically a McLaren F1!

2-1 is the best exhaust you can put on a V-Twin motor.

@Red Beard, Just watching and learning on this end for my girl's build. Got to say you are a great instructor, you make the jobs seem easier and understandable. Just had to give a shout out to you and your crew, as a business owner myself I understand how important the folks are in the background. I can't wait to post my build for you to check out, if your not to busy. Thanks brother for shearing your knowledge, talent and love for the builds. Great job on all your work!!!

Nice

You do nice work 👍

Build looks very cool so far. Just want to say that you’re one helluva decent guy for doing trick build for that guy. Damn nice of you. Looking forward to the next video.👍👍

@RedBeardsGarage

Жыл бұрын

I try and pay people back the best I can so they wont hesitate to help me out again in the future lol. We also where just so thankful for his help.

Sick looking exhaust 😊 looking really good so far, can't wait to see the finished job!

Nice work 😳👌👍🎉🌟🦇

@RedBeardsGarage

Жыл бұрын

Thanks ✌

Damn nice job!

Awesome work as usual.

Lookin Sik 🤟☮️

you’re exactly like me lol ain’t no doin like over doin’

Looking great excellent exhaust, thanks for sharing, all the best to you and your loved ones

I just don't seem to ever have enough to get there. I reach for the sky and the sky gets higher. It seems almost as if this is all rigged against me. Maybe it's not for just anyone. You ever take a step and have it crumble beneath you? That's me. I just can't seem to win for loosing. It's not for lack of effort. Just seems like no matter how i excel no matter how much I try it's all just beyond our grasp. I'm so happy for you and your family. It gives me hope to see you live your best self. Thank you so much for taking us all along for the ride.

RED BEARD HAVE YOU EVER THOUGHT ABOUT BUILDING A STREET LEAGAL MOTORCYCLE OUT OF ONE OF THOSE V TWINS THAT YOU CAN REPLACE WHEN IT QUITS. A MOTORCYCLE THAT YOU CAN REPLACE ALL THE PARTS CHEAPER THAN THE BIG BOYS AND JUST AS MUCH FUN BUT MAYBE NOT AS FAST. I SAW ORANGE COUNTY CHOPPER PUT A V TWIN ON ONE OF THEIR CHOPPERS.

Heck yeah

I want to see someone 670 predator swap a bmw isetta or some micro car

@garyosborn3168

Жыл бұрын

It's been done. There's a channel of this older guy swapping a Honda insite and a few others where guys have put them in trucks and all kinds of shit.

@thundermite1241

Жыл бұрын

@@garyosborn3168 oh he did a 212cc predator single cylender in that but currently he is shoving a kubota i3 into a saturn ion quad coupe the channel is robot cantina right

Super nice!

Cool build RBG as bringing a GEM to the dark side as way cooler. The beefier wheels and tires bump up the curb appeal.

Looks great!!! How's it sound!?! We anxiously await

I used to have a go kart with a 150cc gy6 clone engine and keyed electric start

SS mig setup is a good idea. Probably going to need some tri-mix gas if you are going to run hard wire. Previously I spent some time running .030 er309l, used 90% Helium tri mix gas, ran pretty well.

I just bought a set of those Ice tacking clamps. They are sweet.

@RedBeardsGarage

Жыл бұрын

I am defiantly going to get some for the next exhaust I build.

Hello

I really can't wait to see what this build will be like I think it'll be kind of Trick Quiet with ridiculous power for what it is

please do a video on the ducar 212 it would mean a lot

Might want to drill a new drain hole in the muffler below the outlet side of the muller or it will rot out faster than it should because of moisture build up. The original drain hole is for when the muffler is flat mounted.

Your press would make those muffler mounts in an instant. Pipe (or a socket) for a die, vise jaws set diameter + 2x material thickness. Press.

@RedBeardsGarage

Жыл бұрын

Ill try that on the next set I have to make

I WOULD PUT A HEAT SHIELD BETWEEN THE MUFFLER AND THE DRIVE BELT. IF I WAS A LOT CLOSER TO YOU I WOULD HELP YOU FOR NOTHING SINCE I AM RETIRED I USE TO BE A PIPE WELDER FOR A GAS COMPANY FOR YEARS.

Nice job on the build. Do you have a video on fork seal replacement?

I am guessing you made the merger opening off camera or just left it out.

@RedBeardsGarage

Жыл бұрын

Did it off camera and forgot to film it.

Do you think that reverse gearbox would handle a snowmobile engine? Looking for one that would do a Kohler 25hp v twin and one for a snowmobile engine... Awesome build! Nice, clean, and sturdy!

I like that welding hood, what kind is it

@RedBeardsGarage

Жыл бұрын

It is a Swiss made helmet Optrel Crystal 2.0 It will change your life lol. Best helmet on the market.

really curious as to the volume of that setup. im wanting to make my 212 as quiet as possible for where it gets driven, and i dont know if i should just go get a straw-stick sized muffler from Napa or something

How will your exhaust compensate for motor/chain adjustment?

@RedBeardsGarage

Жыл бұрын

It has a turn buckle chain tensioner.

Am I the only one wondering how the right side exhaust is supposed to flow without knocking a hole in the left side??? Bluetooth?

At (14:05) you joined the second cylinder pipe to a solid pipe…. Did you forget to cut a hole in it???

I’m sure this is an odd question but I’m new to crate engines and have one of these about putting on a mud motor, what are the things sticking off either side with the holes in them, are they for lifting the engine? If not what’s the best way to raise it

Let's hear an update, 6 months on, a year, whatever, about the gearbox. Technically I suppose the best news would be you never seeing it again, but I'm sure I'm not the only one watching who needs a reliable, affordable, and most importantly AVAILABLE FNR unit. I'd really like to see you use one on a personal project of yours. I know you're more likely to beat the hell out of it like I would than the average golf cart driver.

@BubbaB43

Жыл бұрын

I've owned one for a good while and love it.

@jesse1136

Жыл бұрын

@@BubbaB43 That's good to hear. I've got a couple big blocks I've been holding off swapping in for the 212, because I want my kids to have reverse as an option. It's too heavy for them to muscle the end around by themselves if they get into a pickle.

Would like more information on forward/ reverse gear- box doing a ez-go galf cart electric to gas swap live axle swap with 420cc gas engine Would like name and power rating and if it handled the weight and power of the duramax v-twin.

Exhaust turned out nice! Question, what was the tubing you had hooked up to it while you did the finish tig welds?

@karlanderson812

Жыл бұрын

That's for backgas purging. Doing that protects the backside of the weld so it doesn't oxidize and develop "sugar".

What happened to the kabota diesel go kart

How do you make a exhaust vid and not put a sound clip

Were u going to drill a hole in that pipe so they flow together?

is it possible to rotate the cylinder head in the opposite position, which was previously on the left or parallel to the axle pulley, so that the exhaust hole is on the right side of the engine or parallel to the fly wheel i have tagawa 670 engine and want the exhaust pipe on the right side thanks

Well......a little concerned about you welding the end of the exhaust tube to the top of the other tube 14:00, gonna be some serious back pressure going on in one of the cylinders. 😳

I've always been told the tensioner supposed to go on the slack side of the sprockets.

@bryduhbikeguy

Жыл бұрын

It is.Picture it Pulling the chain up as it goes forwards.

You coul’ve used heat to do the flat bar bent

I didn't catch what kind of transmission that was with reverse

@RedBeardsGarage

Жыл бұрын

The links are in the videos description for it.

Shouldn't there be a hole in the pipe where you are merging those two exhaust pipes together

What size driven sprocket did you use? Link?

I noticed you welded the exhaust Y without cutting the hole first.... unless i missed something or didnt catch the angle correctly. Or is there a method or cutting the hole afterwards?

@RedBeardsGarage

Жыл бұрын

I cut the hole. It didn't make it on camera. 😶

@boxbawks

Жыл бұрын

@@RedBeardsGarage gotcha! Happens to everyone! Just rather mention something than not just in case. 😅

Still waiting on predator 459 build

RBG 14:06 it shows you didn't cut the flow for the other side to flow the exhaust maybe you did I'm just looking out brother it was clearly noticeable in the video

@thomaslapan1323

Жыл бұрын

I can't believe nobody noticed that besides me

@RedBeardsGarage

Жыл бұрын

I cut it. I just forgot to turn the camera on.

DID NOT SEE YOU MAKE A HOLE WHERE YOU SPLICED THE 2 PIPES TOGETHER. KINDA BUGS ME.

Didn't see that hole cut for the merge pipe????

@RedBeardsGarage

Жыл бұрын

Did it off camera and forgot to film it.

How much for the motor exhaust supercharged

Not one grease fitting on any of them bearings for the axle You're putting them big ass tires on there and using that itty bitty break