GODOX V1 Flash GUIDE How to use the Flashpoint R2 Zoom Li-on X
This video is a guide to using the Godox V1 Flash / aka Flashpoint Zoom Li-on X.
In it I go over mounting the Godox V1, button operations and functions, as well as the cryptic custom functions menu.
BUY GODOX V1 HERE: adorama.rfvk.net/RNb1X
My entire kit of gear : kit.co/robhallphoto
Follow me on Instagram: bit.ly/2sj7Lsq
Where I get Music and Effects: share.epidemicsound.com/tw3LG
If you are looking for how to learn flash photography, check out my beginners guide to off camera flash playlist.
• Off Camera Flash Photo...
Guide on using V1 as master / slave : • GODOX V1 Master and Sl...
If you are looking for guides on the X series transmitters, you can find those here:
Godox X1-T : • Godox X1T Control Guid...
Godox X2-T : • GODOX X2-T GUIDE how t...
Godox X-Pro : • Godox XPro (XPro-C) Wi...
If you are looking for a guide on using the V1 as a master to control another V1 off camera, you can find that here:
• GODOX V1 Master and Sl...
0:00 Godox V1 Introduction
0:35 Godox V1 Mounting
0:47 Godox V1 Battery
1:02 Godox V1 Buttons
2:14 Godox V1 Zoom
2:36 Godox V1 Modeling Lamp
3:14 Godox V1 Manual, TTL, Stroboscopic Modes
4:30 Godox V1 TCM Function
5:07 Godox V1 HSS
5:38 Godox V1 Commander and Receiver Mode
8:03 Godox V1 Menu Lock
8:20 Godox V1 Custom Function Menu
Пікірлер: 252
Finally a video specifically for first time users. Everyone makes videos for people who already know how to use flash. Keep this stuff up! I just bought 2 of these. Looking to buy a AD300 Pro as well. Your videos are always so helpful.
@fouzoull007
4 жыл бұрын
Thank you , that is perfectly answering my question👍
Finally someone have posted a sensible tutorial about this flash. I gave up on this flash and it has been seating in my bag with no use. Thanks a lot for your time. I will start practicing again.
The only video that actually explains this flash
I just bought my own V1, I was lost on how to use it, so thank you for the thorough video. I’m going full Godox so please keep these video coming.
Wow! This was awesome. This is the best tutorial on the V1 yet. Also helpful to learn about all the other functions. After a lot of frustration at a shoot, I pulled this v1 out and got lost in what function each button had. This tutorial is perfect for reducing the frantic button pressing session I had at a shoot. It is a very nice strobe. Thank you
Wow, after using speedlights for over a dozen years, your video helped me better understand the functionality of not only this flash! Well done!
I am so glad I found this video! I have been soooo frustrated scrolling up and down the power range in 1/10th stops or whatever it is and I am very pleased to find out I can now change power in full stops. Thanks mate!
@wendystumbaugh695
2 жыл бұрын
Same here!!!
I just received my V1 Today and thanks you, I have had a tour of the functions! The manual text is so small. Thank you my friend!
Finally an in-depth demonstration of a product. Thank you for taking the time to do this!
By far better than what I was taught with my mentor! Really appreciate the quick run down! I’ll have to watch again but this was very informative.
Thank you SO much again for producing another easy and concise demo!
I keep coming back to your video, Robert! Thanks for covering all of the bases!
Considering the flash comes with hardly any instructional information, this video is amazingly valuable. My firmware is version 1.4 vice .2 but the information was easy enough to translate the few differences. Great tutorial with out messy opinion just facts!
Excellent tuto... Precise, but in totally in detail. Highly appreciate your efforts. Professional! Thanks a million. All the best.
Thanks for a thorough explanation of the buttons and settings. Greatly appreciate the clear instructions and hands on video.
Thanks so much for posting this. Perfect timing for me
Just ordered my V1 so this was a great introductory video, clear and concise. Many thanks!
Thanks you, was very helpful. I couldn’t sync my remote and found ID was set to 1 and was interfering thanks to you. 💪🏻
@robhallphoto
3 жыл бұрын
So glad it was helpful!
Excellent: clear, comprehensive tutorial. Thanks!
Thank you for taking the time to explained it.
excellent vid, as already mentioned, straight forward and to the point, nice one man, thanks
The BEST Tutorial on V1 hands down!! THANK YOU SO MUCH! would love to see the video how to connect receiver and v1.
OMG so much more useful than the official Godox Video! 😅 Thanks a lot!
Very informative bro, thanks for sharing this. I got the V 1 and this video encouraged me to get it!
Incredibly helpful! Thanks so much.
Thank you so much for your video is very helpful, you make it easy to understand how this flash works. I love it.
Thanks! its so much more clearer than the manual! solved my confusion
What an awesome and through video. Can’t appreciate enough sir. Love from NZ.
Very detailed and informative video. Appreciate it a ton! Thank you so much!
Great instructional video! Just what I needed. Thanks!
Awesome video. short and to the point. thanks
Excellent review of all settings. Thanks!
Much needed Video! Thanks Bob!
Awesome and straight to the point. Thank you
Thank you for sharing this...it's very helpful.
Picked up mine on sale recently. Looking forward to mastering flash
Great straight forward video. Just got this flash. Thank you!
Thank you, I’ve just bought one (it’s still in the box), but excited to put it to use!
Thanks a lot! Very clear and short!
best guide on v1 ever. Thanks
Many thanks for a great tutorial. Had to slow it down by 2 stops though. GOD bless you.
I have one of these coming next week and will likely add a second. This tutorial Is gold, thank you!!
@jmich5123
4 жыл бұрын
Robert I have a question after using both of my Flashpoint versions of the V1, perhaps it applies to all flashes. I was under the impression that if the flashes were set to manual and in my case 1/1 I would get that max light output no matter what my camera settings were. I'm using the Flashpoint version of the XCPro on camera to control flashes. Using a Sekonic L-758C I started measuring the light output of the flash. So long as my shutter speed was set to the sync speed of 1/200 or slower {1/10, 1/60, 1/125, etc...} I was able to fire and measure the flash at full power. If I set a shutter speed above 1/200th and HSS was selected I read lower power readings on my L-758. Perhaps this is common knowledge but I did not know. I suspect the flash shuts down no matter what on the second curtain. None of this is any deal breaker but it bugs me that I don't understand why this is occuring. I'm using the Eos-R btw... If this isn't clear I'll try to explain better. Anyone else have a comment chime in. I understand that my flash effectiveness decreases as I decrease my shutter time but I don't see why the camera would shut down the flash.
@jmich5123
4 жыл бұрын
Update->. After doing some reading I believe the issue is the meters inability to deal with a flash in HSS mode.
this is oe of the best video on the internet.. thanks a ton
Thank so much for this, very helpful indeed!
The best V1 video.
Great video! Please do a video on the difference between TTL and Manual and also using HSS. Please keep these coming! Thanks -
@robhallphoto
3 жыл бұрын
TTL calculates the exposure for you based on reflective metering. Manual, you choose the output. HSS allows your flash to to sync beyond the camera sync speed limit, to any shutter speed you want. But, it does this by pulsing the light multiple times, which means its peak brightness is lower and less efficient.
Thanks so much for that great tutorial; it really helped me to understand my new speed light. I’ll start practicing with this so I can get it down. Subscribing now!
Thanks a lot for this run through
Excellent video. Very informative.
Godox should hire you for a revised manual , now in audio video ! With a few grey hairs and some bold sport I'm starting to get the hang of my new V1. Conclusion after listening to you for a FEW MINUTES ..easy I understand that ,I knew I wasn't stupid ! Deep bow Master !
Great tutorial !
What a great intuitive Video. Thank you for sharing this.😊 April 2024
Thank you for a quick, straight to the point and clear video on the V1 Flash! This is exactly what I was looking for. I subscribed!
I love this flash.....totally stop using my 600EX-RTs for weddings because of these. What even cooler is that you can still make adjustments from the EOS external speed light menu on camera
Such a helpful video thanks
Very well explained thanks
Súper helpful! Thank you!!
Awesome video, thanks!! Just got the V1n speed light and this was very useful!
@zaviergarrett1215
2 жыл бұрын
I dont mean to be so off topic but does anyone know a way to get back into an instagram account..? I was dumb lost my login password. I appreciate any help you can offer me
@skylerwilder7430
2 жыл бұрын
@Zavier Garrett Instablaster ;)
@zaviergarrett1215
2 жыл бұрын
@Skyler Wilder I really appreciate your reply. I found the site on google and I'm in the hacking process now. I see it takes quite some time so I will reply here later with my results.
@zaviergarrett1215
2 жыл бұрын
@Skyler Wilder it worked and I finally got access to my account again. Im so happy! Thanks so much you really help me out!
@skylerwilder7430
2 жыл бұрын
@Zavier Garrett happy to help =)
Awesome video. Thank you.
Thanks! Very useful 🙏🏻
concise and clear!
Great tutorial thank you
Nice video! Very useful!
Very informative ,, thank you very much .
Very helpful indeed... thank you.
finally a flash built to press SYNC and then it automatically goes into HSS!!! Thank God Godox made that easy
Very useful. Thank you.
Very helpful!
thank you, just got my flash
GREAT VIDEO
Great tutorial, thank you.
Thank you for this!!!!
best video ive seen on this.
Also, thanks very much for the tutorial!
appreciate the tips
Very Good video 👍
Perfect, thanks
Thank you so much for posting this! Can you do a video with the trigger on the camera and explain why the shutter will not change with this on the hot shoe?
Nice Video!... Thx
Really wish I watched this video before I got the V1 because I accidentally ordered the S instead of the C for my R6, returned and got the correct one lol so we’re good now🙏🏽
Good job. Thumbs up
Great video Robert! I often shoot AEB photos for real estate and notice that the aperture will change when I turn the flash on to fill the room. Any idea on how to disable the flash controlling my aperture? Thanks!
Thank you so much
For Firmware 1.6, "Slave" has been replaced by "Rx" at 7:25. Similarly "Sv" is "Rx" in custom functions at 9:17.
@earpluggs
2 жыл бұрын
Good thing I looked through the comments first. I was lost there for a bit! Thank You!
@khall187
Жыл бұрын
Unnecessary virtue signaling at its finest
Thank You!
Thank You Sir.
Thanks for the full stop adjustment tip! I was adjusting in 1/10th stops before I saw this. Quick question... my V1 is always on HSS if the camera is on (regardless of shutter speed). I only have the option on the V1 to select HSS on/off if the camera is powered off. 🤷♂️
Thank you.
Nice, I don't use my V1 often so this walk through was timely. In Multi your example 18 Times at 9 hz with a short press of the test fire doesn't launch the flash sequence. Holding the test button down does. Is this just mine?
Hey Robert great thanks for the breakdown...one thing I'm wanting to know does the Infra red focus light work with the A7iii as it doesn't with the 860ii!? Does it with the VIs ... Cheers Sky
thanks mate
Goat 🐐
I can throw my manual away now. Thanks Rob!
Excellent tutorial, Robert! One question please...Is the Flashpoint R2 a rebranded Godox V1/2 flash, and if so, are the controls/functionality the same? Thanks!
@robhallphoto
3 жыл бұрын
The Zoom Li-on X is a rebranded Godox V1, and outside of the name, is identical.
If anyone could point me in the right direction BUT I am using the A7iii with the Godox V1s and the XT2 trigger. For whatever reason the power input is decreased (under exposing) when using wireless. But works fine when mount to my a7iii. This is also with HSS on the trigger and flash. TY!
Thanks for all the great info! Was wondering if there is a reason my fps on my canon camera slows down when I put the flash on? I don’t need 12fps but it slows down to like 2 even at the lowest power on the flash. Any ideas why this is or, better yet, how to overcome it? Saw a photog on tv and his on camera flash was keeping up at @ 8fps.
Hello, Rob! I have the Zoom Li-on iii. Same-ish thing, right? Question about the modeling light. Does it stay on for the exposure? Does the flash still flash? How do you adjust flash if so? Thank you!
thank you for this video, i can now skipped the manual
thanks for this amazing video, but in mine when I put the "LCD IN +3" the contrast is too much and make it harder to read
Hello Robert! Does the flash has the same wireless controlling range as a transmitter?