Mr holly , never far away from a carp. Quality angler. Top bloke . 🐟🎣💪

Absolutely smashed this spring with this rig

Thank you for sharing. Very well explained. Will defenitly try this rig out.

I've used a rig very similar to this about 2 years. I love the quick change option it gives (like with a multi rig). In my case I've used a kicker in order to lock the D instead of Silicone tubing but the tubing might very well be better to be honest cause I'm guessing that will grip the D a bit tighter and therefore maybe prick the fishes mouth a little bit harder. Kicker works though. I've mostly used it with small baits such as tigernuts and dumbell wafters.

Top rig Mikey! Just got back from France after putting all 3 rods on this rig trying different presentations. My 55lb mirror fell to a pineapHell pop up with monster red and particle. Doing it for the SW. cheers mucker

Fantastic 👏 The rig video I've been looking for!

Just wanted to say how impressed I am with your hooks, started to use the grippers and the chod hammers this season. The hook points are mega sharp out of the packed no need to sharpen. On to the rig just tied one with the gripper and shrink tube and again mega impressed can't wait to get out Friday to try it out

@Jonsfishingdiaries

Жыл бұрын

I second that with regards to ESP hooks. I have nothing but their hooks in my box now after trying the grippers last year. I like the size 7 as not too big and not too small. Just right

Love the multi rig, those hooks look awesome 👐

Good video. Been carp fishing for just over a year now and been tying my own rigs for a while now just start doing pva solid bags and might give this one a try👍

I use slip d in my solid bag fishing and on my wafters like the idea of the tubing good little edge as you say we can clearly see looks deadly with a snowman 🎣🎣

Very interesting thank you will try it out this weekend by one of our lakes.

I never fish for carp but I'm going to try this rig 👌🏻💪🏻🔥

Great video!

Great looking rig ,and one I’ll be looking at using the next time I’m on the bank

Good solid rig Mike for most situations. Sometimes on a run of blanks its easy to chop and change when as you said with a rig like this it takes the doubt away.

@BaitworksTV

2 жыл бұрын

Thats the one mate :)

This rig reminds me of another good rig that i use you can use all baits change hook and use for donkey years Kevin from bait works he uses a combi and Albright but yours is much easier and awesome mechanics I also use that blob of putty near the hook so thumbs up from me . Thankyou

Mike Just used this 👌👏😉😉🎣really is to tie and caught 3 fish whilst using it thanks for the advice

Top man Mike 💪🏻👍🏻

Been using this rig as a pop up rig had 4 30s on it my go to rig now thanks Mike 👍👌changed my season 😃

@BaitworksTV

Жыл бұрын

Wicked Gary, thats wonderful to hear mate.

@brandonbr3796

Жыл бұрын

You still snowman it with a boiley under the pop up?

@garyspence8383

11 ай бұрын

What bivvy is that ?

Tied up one of these to try out,caught on it Saturday night and it was never falling off.Will definitely be using it more as love how easy to tie and change the hook is

@BaitworksTV

2 жыл бұрын

Great stuff Terry! great to hear it mate, glad it's working. All the best Mike

@billydelahaye611

Жыл бұрын

@@BaitworksTV how do you get the 0.75mm tubing over the eye

@terrifying7847

Жыл бұрын

@@billydelahaye611 I have found the best way is to get the end of the tube touching the eye of the hook then push and gentle twist the tube as you do.This seems to help it slide over the eye a little easier

@billydelahaye611

Жыл бұрын

@@terrifying7847 nice one mate cheers toght lines

Sometimes I can use the hook after catching a fish but when in doubt it comes off, really quick change, I also pre make the baits on a ring with floss, I like to do as much prep at home as I can so less faff on the bank. New hooks and bait goes on night before for next day session. Arrive, and rods are in within 10 minutes. Nice little rig setup this.

Nice one mate 👍 tied this rig recently and I’ve had consistent results up to to 28lb common 🎣

Slip D,great rig 👍🏼

Thanks for sharing this mike luv ya vids I've been on the banks for a fair while but have deffo picked up some great tips from you 🙂 tightlines

@BaitworksTV

2 жыл бұрын

No problem at all mate, all the best for 2022, tight lines

@hi.9472

2 жыл бұрын

@@BaitworksTV nice one I'm familiar with the pits in ya vids fairplay to ya/gotta b the croc next 😊/i can remember feeding the carp in crocs pit 15 or so year ago of the decking of the building /epic 👍

Think I might give this a whirl. I like to use new rigs for every session, and have a cacophony of rigs in my board, some used, some not, some, who knows. This would simplify my fishing: What's not to like about that? All I'd need is a bunch of different length boom sections, then I can select a hook and a bait mounting method. It's similar to my favourite german rig, mechanically Job done.

This has been my go to rig for years, tied exactly the same, but personally I prefer a size 4 longshank hook

Bin using this rig a while now and it nails the fish every time. Popped up or wafting

Best rig ever 👊 especially combined with a trig-hammer

Hi Mike, great video mate, will this rig work with size 10 & 12 hooks, and do I need to alter the tubing length or anything else on the rig Dave

Saw this years ago from Mark Bryant, used it since and love it!

damn this is so easy, can't wait to make them and start test them! thanks for the video!

Amazing rig that gives the same qualities as the slip d but on a friendly student budget. However when is your tubing coming into stock as I can't find it anywhere

Lovely looking rig definitely one I'm gonna try soon. Do you have any issues with slippage if using a clipped on bag?

Can’t believe how easy this rig is to make

A sharp hook and a hookbait they want. Thats all youneed. Not over complicated rigs. I fish for river carp , just strong reliable simple end tackle

What size & pattern hook were you using btw a Curve 4 maybe ?

I find it interesting that some rig philosophies completely contradict each other yet both work. Take, for example, the difference between this rig, and a standard bottom bait wafter rig. The idea of using a critically balanced wafter rig is for the hook to be super light and go farther back into the fishes mouth. In contrast, this rig adopts the idea of using added weight (putty) and a heavy hookbait to pull into the fishes lower lip. Both kinds of rigs would be fished in the same scenarios, both kinds of rigs do really well, but they have completely different approaches. This makes me want to see more high quality underwater footage testing different rigs like this.

@littlesam4.931

2 жыл бұрын

Good points, be very interesting

@ESPCarpgear

2 жыл бұрын

Light or heavy both serve their purposes. A lot of it comes down to how the hook hangs or how the bait is attached in both scenarios.

@tomwinterfishing9065

2 жыл бұрын

Yep. I really want to see underwater footage of big 25-30mm baits, compared to, small wafter type baits…

@EricPollarrd

2 жыл бұрын

They all contradict each other to create maximum manies in the pocketos. Take the Ronnie for example, showing the hook to be almost vertical. Yet in another rig video it’ll state no nooooooo the hook MUST be floating more horizontal, and just about every angle in between 🙄🙄🙄 Top sales pitches all round

@BaitworksTV

2 жыл бұрын

The concept for me and why I use it is a hook that swings below any bait, like a claw mate. Then the force of the bait being blown down the shank certainly helps set the hook, even when carp arent moving to tighten up the hook links. :)

Amazing informative video! Would this rig work with solid bag fishing if I shorten the length? Cheers

I take it when you catch a fish the loop with travel down the shank and stop at the eye? knocking the tubing off the hook. Most slip d rigs are fixed at the hook. If that makes sense

Beautiful mirror

Awesome Mike, love all your content.... can listen to you for hours. What hook do you use for this rig?

@christiancaudell5320

8 ай бұрын

How do you use PVA bags with this rig? Caught my first 40 on it last night😊

Loving this rig but I have noticed the coating bunches up,I have to keep straightening it out but don't like how it looks

Hi great video, can this rig ( hooklength) be used with any lead arrangement and lake bed ??? Specifically weed ?? Tia 👍

Hi Mike would this work with a 22mm bottom bait ?. Used this rig for the first time Tuesday and had the biggest carp in the lake 53lb 2oz. 👍

🔥🔥

Does this rig work as well if made with fluorocarbon?

How long do you make the silicone tubing??

Mike how do you fix the boiler or pop up to the hook ring cheers

Hi Mike , coming back to this rig after using blowback rigs for a while. Just trying it as they’re so much easier to tie. Quick question, do you ever worry about the lack of ability to have a longer hair for bigger fish or longer rigs, or do you find this really makes no difference? Thanks man.

@BaitworksTV

Ай бұрын

Hi Mate, I've never had any issues at all, in fact I've just got back from a European trip and I've been using it with a 24mm bottom bait and 15mm topper, tight and the big fish are always hooked perfectly also. It's down to the D not being pulled to far back I feel mate so the bend of the hook is always heavy and hanging down like a claw. Good luck with it.

Hi...I love the look of this rig. Correct me if I am wrong, are we relying on the 1 overhand knot to securely land the Carp with? Thanks

@BaitworksTV

Жыл бұрын

Hi Ace, you can do a double overhand mate if you wish but I've never had the overhand go and I've had some crazy, snaggy battles. cheers mike

@gdb99238

Жыл бұрын

@@BaitworksTV Thanks Mike. I take your word on that!

Nice rig. How long does the hook section loop need to be ?

@BaitworksTV

Жыл бұрын

All depends on the hook size about an inch and half to two inches suits most rigs mate, all the best Mike

This rig looks very good but Im thinking if the D section will slip if Im casting far and I put a small pva on..?

@BaitworksTV

2 жыл бұрын

It doesn't mate, the weight of the bait keeps it in place, never had any issue with it spinning or flipping. Like you say, if worried pop a PVA nugget on it ;) Tight lines, cheers Mike

@davidkis7879

2 жыл бұрын

@@BaitworksTV Thanks for the answer bud! 😁

Whats the max size boilies u use with a snowman on this rig. I’m just wondering if I use and 18 and 15 like i normally do is it going to effect the hooking capabilities with the bait being so close to the hook? Thanks

@BaitworksTV

Жыл бұрын

Hi Mark, I've used big and small snowmen and they both work exactly the same, really well mate. Give it a go. All the best, Mike

Hi Mike, been getting some bank time with slip Ds and this multi version. Would you also use this for a bottom or double bottom bait? Something you seem to do different to most is stop the d in line with the point. Which actually makes perfect sense to me, however where would you position it if using a double bottom bait (no buoyancy) further down hook? Near bend

@BaitworksTV

Жыл бұрын

Hi Mate, sorry for the delay, I use it exactly the same with all baits, pop ups (rarely use them) right through to baits hard on the deck, the rig has always performed really well. I like the hook bend to be heavy, I find D's further down the shank prevent this, hope that helps mate.

is this better then a regular hair rig?

Really loved this rig when I first saw it but the downside is you can't really use pva mesh with it. Also find the soft D needs taping to guarantee no tangles on cast. Do you not worry that the braid section is suffering abrasions and ware and tare from the hook eye area. I tested a few times and definitely caused some whispyness

@BaitworksTV

2 жыл бұрын

Yes mate, sadly I can't use a large PVA bag on the hook but little walnut sized ones are fine, the 0.75mm tube is tight and snug so keeps the D in place. Never had any issues with the abrasions, ever with the hooks I use. I've used the same hook link, the actual one for over a year with some incredible battles, never had an issue.

@Kb11466

2 жыл бұрын

@@BaitworksTV oh hey Mark, yes I know you like this rig as well. Albrighted to fluro if I remember right 🤔 that's good about the abrasions, I used the esp tungsten loaded with muggas and definitely found the braid was getting pulled into that tiny sharpish part of the eye where it finishes off (if that makes sense) used some other braids that seem better for this. Fab rig, would be my go to if just fishing single wafter and more likely to use when expecting to change hook often. I barely catch so not so necessary :) awesome bait btw

@BaitworksTV

2 жыл бұрын

It’s Mike mate here, but yes Mark loved the same concept rig with the combi indeed. Great rig also. Can’t comment on the Muggas mate, but that tungsten hooklink is tough as old boots 👍

@Era-DK

9 ай бұрын

@@BaitworksTV Could you not just tie the PVA mesh bag to the d section with pva tape rather than attaching it to the hook? Also how d you prevent the D section from tangles after cast or fish pick up?

👍👍👍

I made some rigs. Thanks.

Hi Mike, are you happy with the overhand knot loops at either end? Everyone seems to advocate the figure of eight these days. Thanks Shaun

@BaitworksTV

Жыл бұрын

Yes mate, never had it slip and I've had some hard old battles over the years Shaun.

@darrylclarkson1799

10 ай бұрын

Absolutely no need for a figure of 8 with coated braid or straight braid, it doesn't constrict like mono.

Is this not Nigel Sharps rig from years back, with just a kicker on the eye of the hook?

I've been carp fishing since the 1980's and trust me, sharp hooks are needed, but do not believe what these people tell you about swapping the hook every catch, cast or sh1t you have. They only say it on line as they get free hooks for saying this.

I like how we get crap for using the imperial system over the pond but you guys still use it, too 😂

Hi mare which hook are you using and size please

Hi I've just started carp fishing and want to try this rig but I'm not sure how you attach the boilie to the link on the hook ,what should I use ?

@ESPCarpgear

Жыл бұрын

Hi Thomas.. To attach a bait, you want to thread some bait floss through the little swivel which is attached to the hook. You then put your bait on a baiting needle, straight through the centre, and then with the same needle pull the two strands of floss through the centre of the bait. Then you want to put your hair stop on top and tie a few knots in the floss trapping the hair stop. Hopefully this helps..

Great video. Just tried to make the rig. I am really struggling to fit 0.75mm silicone over the eye of a hook. And I've tried several hooks 😫

@ESPCarpgear

2 жыл бұрын

Have you tried wetting it? It is tight but should go on fairly easily. If it is a fresh piece of silicone maybe give it a good stretch first so it is a bit more 'worn in'. Mike is using a big hook here and it goes on ok so should be easier for size 6's etc.

@hopingowen

2 жыл бұрын

@@ESPCarpgear Thanks very much. I will give it a try 👍🦈

@ESPCarpgear

2 жыл бұрын

@@hopingowen Also, perhaps heating it with some steam first? Once it has been used a few times it should be easier and easier.

@bornbredcarpgear2448

2 жыл бұрын

Hi Nigel, its a tight fit mate, but as long as its the ESP 0.75mm tube I promise it does go over, it takes a little bit of wiggling over the eye but I want it tight on purpose to trap the slip D :) All the best, Mike.

@hopingowen

2 жыл бұрын

@@bornbredcarpgear2448 Thanks guys. I've ordered some esp 0.75 silicon. I've got all sorts of makes and sizes but no esp. I'm sure it will work with the proper materials 🤣👍🐳

What hook are you using?

Hi Mike , can you use this rig with pva bags

Hi Mike please do not laugh, but how do you attach boilies mate

I presume Mike is using the Cryogen curved shanx hook?

What’s the point in the hook aligned when you have a counter weight with the putty?

@ESPCarpgear

Жыл бұрын

They work together, as putty slowly guides the rig down and the aligner makes it turn to the optimum angle

Is there a risk that when the loop tightens up to eye when playing a fish that it gets damaged in the eye gap?

How is the hook bait attached to the micro hood ring swivel ?

@ESPCarpgear

Жыл бұрын

Floss pulled through 👍🏻

what size hook and pattern was you using with this rig I want to give it a try this autumn .

@scottlongworth3615

Жыл бұрын

I'm wondering the same as he mentioned every other component apart from the hook

@ESPCarpgear

Жыл бұрын

Curve shank, in a size 4 or a 2 works perfectly.

Hi Mike, I use a similar rig but always tie figure 8 loop knots, is there any reason you use overhand knots? I'm guessing you have never had any trouble with the knots??

@bornbredcarpgear2448

2 жыл бұрын

Hi Brett, exactly that mate, never had an issue with the overhand knot mate. All the best

Hey mate cracking video, I'm currently using shrink tube to get the same outcome you have using silicone tubing, what tubing are you using most the ones I've seen are too small internal diameter to go over the eye of the hook. cheers

@BaitworksTV

2 жыл бұрын

Hi Sean, I use a 0.75mm esp silicone but if your struggling to get it over the eye then the 1mm would be perfect. All the best, Mike

@garyspence8383

Жыл бұрын

Mark Bryant ?

A variation on the Slip D Multi Rig

Which hooks, and what size do you use please. I've bought some esp 0.75mm silicone. Unfortunately none of my hooks are having it 😫

@BaitworksTV

2 жыл бұрын

It does fit mate, it's a tight push and requires a wiggles to get it over the eye but I've used it on hooks as big as a size 2 mate without any issues, like I say its tight but thats how I want it to keep it all in place. Cheers Mike.

@hopingowen

2 жыл бұрын

@@BaitworksTV Thanks Mike. I will persevere 🤣👍

@BaitworksTV

2 жыл бұрын

@@hopingowen Just push it onto one side and stretch it over the other mate. Once you get the knack you'll be away :)

@hopingowen

2 жыл бұрын

@@BaitworksTV Sorted thanks guys

Was tha shot at Coate Water?

Ive been using this rig for about 4 weeks ive had a few carp but the last 2 days ive lost 5 carp I dont know why i have put new hooks on every time any ideas

@ESPCarpgear

2 жыл бұрын

Hi! Bad luck. Hard to say what is happening without knowing more. What hook and bait size are you using? Did you lose 5 fish and land none? Thanks

what length silicon.1cm ?

How long is the silicone tube you use?

@BaitworksTV

2 жыл бұрын

I use it about 10mm long mate, all the best Mike

I’d love to know how he got .75 tubing over a hookeye, I’ve just tried and they is no chance.

@ESPCarpgear

Жыл бұрын

It definitely goes over, although a bit tricky the first time. A few people said it was a bit tough at first but we’ve checked it and it’s definitely the right measurement. Try with dry hands and really take it from side to side as well as the pushing onto the eye motion. If you are right handed you want the silicone in the right hand first fingers, with the coated braid tensioned also by the remaining fingers in the right hand and palm. The hook in the left hand, eye facing towards the right. Once you’ve got it you’ll find it easy. Good luck 👍🏻

😀🤝👏 Peccato Io solo Sordo o ho forma capito spero poso copie ok, bravo vince

Cannot get the 0.75mm tubing onto a size 4 mugga, other than that it's great!

@bornbredcarpgear2448

2 жыл бұрын

Hi Jamie, Its a tight fit but a mate uses it with the size 4 muggas and it does go over, you almost have to wiggle it over the eye. It's only the ESP 0.75mm tube that seems flexible enough, other 0.75mm tube seems too tight mate. cheers Mike

@Kb11466

Жыл бұрын

Just shrink tube it mate

Any chance of someone north of Watford on this channel?

Nice little rig! What pattern of hook is this?

@BaitworksTV

Жыл бұрын

A big curve style hook is my go to mate

@brandonezra4231

22 күн бұрын

What brand? Size? Thx

Mike please explain just how you get the tubing over the eye, I simply can't do it😢 What hook are you using to construct it? Please, please help me😂🎣☕

@ESPCarpgear

9 ай бұрын

Hi Ian, sorry you are having trouble. It is a bit tight getting it on at first, but after that is a lot easier. If you can't get it on maybe go for the next size up in silicone tubing? You should be able to return the 0.75mm stuff. Mike uses large hooks size 4 or 2, so it should be easier on a 5, 6 or 4?

@ESPCarpgear

9 ай бұрын

Try with dry hands and really take it from side to side as well as the pushing onto the eye motion. If you are right handed you want the silicone in the right hand first fingers, with the coated braid tensioned also by the remaining fingers in the right hand and palm. The hook in the left hand, eye facing towards the right. Once you’ve got it you’ll find it easy. Good luck 👍🏻

@ianredmond8389

3 ай бұрын

Nash 1mm shrink tube works perfectly on size 6 Krank B's. .75? Impossible.

What size hook is that your using

@ESPCarpgear

2 жыл бұрын

This was a size 2 or 4.

So my only concern is won't the slip D pull back on a decent cast?

@BaitworksTV

2 жыл бұрын

It doesn't mate no, its fine. cheers

@aTmospheriKzDnB

2 жыл бұрын

@@BaitworksTV excellent I imagine the lead takes the brunt of the force

How come you picked up green scissors to cut the hooklength but then used black ones, korda ?? 😉

@ESPCarpgear

Жыл бұрын

Talk about eagle eyed! We do green scissors too.. I am sure we just grabbed whatever was to hand. Never just take one pair of scissors in case you lose them! haha

@leighherbert4325

Жыл бұрын

@@ESPCarpgear Ha Ha, 😆 loved this video watched it a few times and now use this rig myself, looking forward to seeing more from Mike 👍👍

What hook pattern would you use for a pop up?

@BaitworksTV

2 жыл бұрын

The same mate, I really rate a curve pattern. All the best Mike

@easternundergroundsounds6977

2 жыл бұрын

@@BaitworksTV thanks I’ll give them a go next session!

0.75 tubing over a size 4 curve eye ?

@BaitworksTV

2 жыл бұрын

Yes mate thats the one, I've used the 0.75mm silicone over bigger hooks also, nice tight fit is the key.

This is how it should be tied! Why people fix the d on the hook is beyond me. I use the same setup but 6-7 inches using a Heli setup

@stevenpurcell507

2 жыл бұрын

Can you chuck a stringer or pva bags out with this without the d slipping back to the eye of the hook cheers ?

How long is the piece of silicone tubing ?

@bornbredcarpgear2448

2 жыл бұрын

10mm approx mate, that works best for me. cheers

@chrisc1315

2 жыл бұрын

Thank you

what pattern hook did you use?

@carper1993

3 ай бұрын

Looks like a ESP Cryogen curve shanx

I have a mistake: i can’t put silicon tube 0.75 on ring eye!. Impossible. To much smaller the 0.75

Which hooks are being used here? Cheers

@ESPCarpgear

Жыл бұрын

Any curve shank pattern will work!

@peerreiss110

Жыл бұрын

Ok great! And in this case as i did like the set up was it an ESP one or a Mugga?

What hooks do you use

@ESPCarpgear

Жыл бұрын

Curve shank patterns work best

Literally impossible to get that 0.75 silicone on to a size 4 hook

@carper1993

Ай бұрын

I use the ESP 0.75mm silicone and size 4 curve shanx and it goes on fine for me. I just wet it and twist it over the eye.

From my tests it doesn't actually pull down on h hook on ejection...the whole lot flies out and doesnt catch the lip...!!

@photoman3579

2 жыл бұрын

You are exactly right ...the hook and bait doesn't react as he says at all or ever..

@connorhird3390

Жыл бұрын

@CastAirLead He's used it in his own mouth lol