Greatest video's ever! .. Excellent explations and really valuable . Thank you for your support to us again .

Such an amazing video! - Great explanation, you just gotta love the airbus!

Thank you for another great video. It is nice to be shown how to do it properly. Looking forward to many more vids. Regards

@320SimPilot

4 жыл бұрын

More to come and thanks for watching as always!

Another great video! Keep up the good work 👍

@320SimPilot

4 жыл бұрын

Thank you!

excellent

Amazing 😍

@320SimPilot

4 жыл бұрын

Thanks 🤗

Thank you!!!

@320SimPilot

3 жыл бұрын

You are welcome!

I wanted to review this tutorial on the go around. Last night I was watching a live A 320 flight. The sim pilot was not a real A320 pilot. He was on final to land at Washington DC Airport. He could not lower the gear something was wrong somewhere. He tried at least 4 times with no luck while continuing his decent to the runway. He was resigned to the fact that this was going to be a belly landing. I started to type in to go for a missed approach but someone else told him to use the manual gear handle. The sim pilot did not even know were it was located. He had to be directed to it's location mean while the aircraft is still descending to the runway. He finds it and cranks the gear down and locked then lands the aircraft wheels down. He rolls out and comes to a full stop at the end of the runway. I sat there with my jaw dropped open in disbelief. He and the rest of the viewers could not believe it either. Now I know what he did was just plain wrong and he was lucky that's all. I do have to admit it was one wild ride down final to the landing.

Super super interesting !

@320SimPilot

4 жыл бұрын

Glad you enjoyed it! Thanks for watching.

Once again, an excellent and useful video. Many thanks! I was just wondering about go arounds that rely on ATC vectoring after you've followed the initial missed approach procedure (ie the approach chart says something like " ... then as directed by ATC..."). Obviously this takes care of itself in real life or when using VATSIM, but could you recommend a way that we can plan and then 'self-vector' to a holding point and then make another approach if we're not using VATSIM? May I also offer another suggestion for your tutorial 'to-do list'? Would you please make a tutorial for step climbs or descents? Thanks again, please keep these excellent videos coming!

@320SimPilot

4 жыл бұрын

Thank you for watching as always. I like your idea about self vectoring, I will add it to the list. For step climbs/descents do you mean procedural (so the chart includes altitude constraints at each waypoint) or from ATC where they limit your climb over the radio?

@richardv8416

4 жыл бұрын

@@320SimPilot Thanks for the response, and congratulations on the 200 subs :). I was initially thinking about the alts specified at waypoints in a flight plan (ie TNT/F380). Some guidance on how comply with ATC level change instructions would also be really helpful for those of us thinking about using VATSIM at some point.

Thanks for doing a go-around video, congrats on 200 subs :)

@320SimPilot

4 жыл бұрын

You are welcome, thanks for watching and thanks for the congrats!

@Aviator738

3 жыл бұрын

@@320SimPilot 23K subs :)

@320SimPilot

3 жыл бұрын

@@Aviator738 Hard to believe! Thanks for sticking with the channel!

@wotan91

3 жыл бұрын

This comment aged like fine milk :D

@Aviator738

3 жыл бұрын

@@320SimPilot 31,2 K!

I love your videos about procedures! For the next Q&A: What about a late Go Around in a circling approach? When you activate the secondary FPLN you don't have a go around procedure, or? Thought about it yesterday when on VATSIM I was on the LOWI 08 circling approach and it was quite busy on the runway. Fortunately everything went well 8-).

@320SimPilot

4 жыл бұрын

Thanks as ever for watching Holger. That is a great point and a big topic, I will see which video I can do about it!

@djhaik

2 жыл бұрын

@@320SimPilot Hi sir, would love a video about this :) had the same issue recently

What do we do after the go around and after passing EH624? Do we set the FMCU to go direct to EH620 and descend to 2000ft?

Many thanks for this great video and tutorial. J Just made a flight before on VATSIM to ESSA and had to perform a go around due to traffic on the RWY. I could manage it but wished to had a pilot monitoring. I tried an engine out scenario after V1 (GW appr. 82 tonnes), but I think the performance was very low, I got almost no climb rate. I would be interested in your opinion about this and may be you can do a tutorial when you think the performance allow it.

@320SimPilot

4 жыл бұрын

You are welcome! Yes single crew procedures can be very busy in flight simulator. I have not yet had a look at engine failures at V1 in the ToLiss but I will soon, and indeed will plan to make a video about it!

@richardv8416

4 жыл бұрын

@@320SimPilot That's great! Some tutorials on emergency procedures would be really interesting! :) I'm looking forward to those...

All of the A320 Sim Pilot tutorials are simply great; unbeatable. But I have one caveat. If English is not your mother tongue, the verbal explanations are unfortunately a little too fast. But either way: Thanks for these great videos. Regards

hi there hope your day is fine . what happens if you touch down then give it the beans toga thrust srs does the mcdu drop flight plan ie blue string gone or does it hold it in box please

@320SimPilot

4 жыл бұрын

Great question, yes it should change to go around phase! I will do a video on this soon. Thanks for watching!

How do u set the Go Around route?

"Home entertainment only" Now how am I going go land my private A320?

I didn't get how to get back to final app again after missed approach. Using heading, manually or there is some go around route I supposed to set before the take off?

@airbusguy3638

3 жыл бұрын

On the ILS chart there is a missed approach procedure. It will probably be vectors for a new approach from the last point of the missed approach procedure

hi captain. can you elaborate on alt* function. i dont seem to understand it.

Hi, great video! Could you explain why you've added the airport waypoint to the climb page? I didn't get this one :)

@320SimPilot

4 жыл бұрын

Hi thanks for watching and commenting! I am not sure I understand, could you please tell me at what time in the video you are referring to?

@tadeus7258

4 жыл бұрын

@@320SimPilot Hi, thanks for responding, you have added EHAM18R to the CLIMB page at 1:48.

@320SimPilot

4 жыл бұрын

@@tadeus7258 Ah yes, this is the 'PROG' (Progress) page. I am adding the runway so I can see the distance to touchdown, I explain it a bit more here in this video: kzread.info/dash/bejne/aGqTs5KFlbHSg5c.html I hope this helps!

@tadeus7258

4 жыл бұрын

@@320SimPilot Thank you, now I'm getting it :)

I don't think manage speed can go below greendot

@peteconrad2077

2 жыл бұрын

It can. It can’t go below VLS.