Gmsh Tutorial Part 1 - Fundamentals and 2-D Meshing
Ғылым және технология
Gmsh can be downloaded from gmsh.info
You can use Gmsh meshes in QuickerSim CFD Toolbox for MATLAB® - free software version can be downloaded from our website for both personal and commercial use.
Visit: www.quickersim.com/cfd-toolbox...
Пікірлер: 28
Thanks for the excellent tutorial on Gmesh basics. Very helpful for a beginner like myself.
Thank you for these tutorials!!!
Thank you! Excellent free tool.
Very clear and helpful! Thanks
Thank you very much! Its really useful
Where is Part 2??? I am doing a exercice of 4.3 Incropera but for a mesh 500 times more thinnest. And i have to make a mahtlab program in wich it has to calculate by FDM the respectives temperatures for all nodes in my discretized mesh by the program Gmsh with BC especified by the problem. But i am having problems in the numeration of the nodes and elements, i even nominate a specific name for my lines i can read my nodes and elements in my mathlab. But my mathlab program doenst work . Could you make a video assisting the newest programers like me, to get a light in end of the tunnel. Thks. sorry my english
Thank you. This tutorial was very helpful!
@QuickerSimLtd
3 жыл бұрын
Thank you for your kind words!
Thank you. It's very useful
Hello I am able to find part 1 and 3 however part 2 doesnt seem to be available? please may you point me in the right direction?
Awesome! Thanks a lot.
Very helpful
thanks, it was very useful
how to output 3 files : nodes file, edges file and elements file each one apart. thank you !
Hi, could you show how to import a 2D-STEP file from FreeCAD. If I build the same geometry as in your example with FreeCAD and import this to Gmsh, none of the explaind steps to build a mesh works.
this tutorial is very good. thanks
Excellent. Thank you very much for this video, I can fix my msh file in the right way.
great tutorial
Which Gmsh version yiu have used?
Thanks; it was beneficial!
When i start there is already k square box . How i remove it for starting a new tutorial .
Please how convert. msh to mesh.dat
How to get the surface after the straight-line? I've not got it. The version has changed, so it is not as the same as your video.
@nickjohnsonn9761
4 жыл бұрын
Hi bro. Do you have the answer. I ran into the same problem. However, this could be done by clicking to Mesh > Define > 2D
Where is part 2?
@QuickerSimLtd
7 жыл бұрын
Dear Pranav, we still request for a little bit of patience - we are preparing a new release of our app, as soon as we finalize that, we will record the next movie. We know that this issue is pending...
It would be much better to set speed at 1.5x. Thanks for the tutorial!
apaan dah, gak ngapa2in -_-