GM Passlock Diagnostics

Jon Nelson discusses the GM Personalized Automobile Security System.
This video is sponsored by CARDONE.
Brake & Front End: www.brakeandfrontend.com/
CARDONE: www.cardone.com/

Пікірлер: 72

  • @dboy3xf
    @dboy3xf Жыл бұрын

    THANK GOD!!!! A video that takes its time explaining in detail 🙏🏽

  • @rickl6697
    @rickl6697 Жыл бұрын

    Our 2003 Saturn(which is a GM product) has the pass lock system with no special keys. The special resister is in the steering column(opposite the ignition switch). Like I said in a previous comment I replaced it years ago, reprogrammed it with the 3 -10min sessions an had no problems for years. It has started to mess up again and we just wait 10 minutes and the passlock light will go out and it will start. Also, we've notice that if we wait the 3-4 seconds after turning the switch to the on position for the passlock light to go out it seems to always start, no problem. (Maybe the resister needs a few seconds for the value to settle, maybe this has something to do with most people having problems when the weather turns cold).

  • @11inventor
    @11inventor Жыл бұрын

    I tried this several times,, no luck... Any suggestions? 2012 GMC Terrain 2.4

  • @niya430
    @niya4302 жыл бұрын

    does this procedure go for a c6 corvette 2008

  • @andyharman3022
    @andyharman302224 күн бұрын

    When these days have passed long into history, people will look back and marvel at our stupidity for giving computers so much control over our machines.

  • @cooks4ross

    @cooks4ross

    8 күн бұрын

    Yeah these designer are just foolish all that just to start and drive .

  • @jorgecabrera1293
    @jorgecabrera1293 Жыл бұрын

    Thanks for your explanation I found it very interesting, but I need to know if you can show a video with touch button keys, because I have a 2012 Cadillac SRX and it didn't work for me. Thank you

  • @donoberloh
    @donoberloh2 ай бұрын

    Thank you for all the info. My trucks ignition switch was jacked up by would be thieves. The dealer replaced the ignition switch and supposedly reprogrammed the keys. It still idles rough and won’t stay running. Could screwing up my ignition w

  • @bighigh69
    @bighigh69 Жыл бұрын

    So I don't quite understand. Does the light have to go out around 10 minutes or just wait 10 minutes?

  • @waynerivera6990
    @waynerivera69902 жыл бұрын

    True story this works ✅💯

  • @jamesscheib4827
    @jamesscheib48272 жыл бұрын

    2004 Pontiac grand prix gt replaced old tumbler with tumbler from salvage yard had new key made key guy can connect to computer but computer won't communicate to program new key and car will turn over but wont start please help asap

  • @gmcduramax8835
    @gmcduramax88352 жыл бұрын

    So what happens if the lock symbol only appears the first run and not the second and third time

  • @CHICAGOFIREWORKS

    @CHICAGOFIREWORKS

    Ай бұрын

    Same problem I’m having! Any solutions?

  • @elviscarballo4150
    @elviscarballo4150 Жыл бұрын

    I did that it turn on I move it to park it right and turn it off and started todo it again now I tried it with the key on and it’s been 1 hr and the lock have not turn off at all

  • @Cleanairmufflers
    @Cleanairmufflers10 ай бұрын

    My 2004 Humner only shows me the solid battery light when i put the key in and does not crank ....nothing happens

  • @reformcongress
    @reformcongress10 ай бұрын

    How about making a video for pushbutton start vehicles.

  • @DavidGutierrez-zi4dy
    @DavidGutierrez-zi4dy Жыл бұрын

    great!

  • @AlDav-zv9er
    @AlDav-zv9er2 ай бұрын

    I bought 2002 Tahoe on 2010 was installed with after market security alarm I used that for long time until both fob keys was bad so I decided to removed after market system and I start using original fob keys work okay but my Question is if I unlock the door with the key and open the door horn doesn't go off and the vehicle start normal is that normal ? my understanding is if we don't use fob key to unlock the door vehicle should not start and horn should go off please advice thank you and yes yellow security light working blinking and if i unlock from inside and I open the door horn goes off

  • @tattoomom5161
    @tattoomom51612 жыл бұрын

    On my gmc 2006 Yukon Denali I replace my ignition switch when I got the key with it my old key that came with the truck I can open the door but not my new key so I put in the new key and wait for 30 sec on the on position like 5 times and my light comes on then it shows off so I don't know why doesn't do that with my new key on my truck any suggestions and opinions or what should I do I'm trying to save money so I want to take my car to the GMC dealership

  • @hyatt1982ify

    @hyatt1982ify

    Жыл бұрын

    You said you waited 30 seconds? You need to turn the key on and wait 10 minutes until the theft light goes out. Then do it again, two more times.

  • @bighigh69
    @bighigh69 Жыл бұрын

    Can the hood be open when doing this key relearn?

  • @jefferymarshall5317
    @jefferymarshall5317 Жыл бұрын

    My security light remains flashing and reprogramming doesn't work

  • @irvinkirton858
    @irvinkirton858 Жыл бұрын

    I have that exact problem with monr

  • @lindarodriguez4882
    @lindarodriguez48829 ай бұрын

    i have a 2009 g5 and i put a used ecm and followed the 30 min video to thinking my car would start now its not reconizing my key and wont start at all

  • @JoseOmar-bf4xv
    @JoseOmar-bf4xv4 ай бұрын

    I have a 2006 cobalt ss with a similar issue. What section should i be looking at for the short to ground issue? Id like to replace the ecm but first id like to fix the ground issue. Its going into engine power reduced p0601

  • @kefwals8722

    @kefwals8722

    3 ай бұрын

    That's a completely different issue man. Try your throttle body positioning sensor I want to say. I've had to deal with that more than once. GMs.electrical is far from top of the line. But replacing that sensor will often fix that shit.

  • @joanndavis4442
    @joanndavis4442 Жыл бұрын

    Good work

  • @jeremyshrader9787
    @jeremyshrader9787 Жыл бұрын

    My security light never turns off after 10 mins....someone help

  • @andymarkel

    @andymarkel

    Жыл бұрын

    Try charging the battery

  • @gadgetman136
    @gadgetman136 Жыл бұрын

    What do you do if the security light does not turn off after the 10 min? This procedure has not worked for my tahoe

  • @EndTimesDisciple

    @EndTimesDisciple

    Жыл бұрын

    That's my question

  • @bighigh69

    @bighigh69

    Жыл бұрын

    Can the hood be open when doing this key relearn?

  • @gadgetman136

    @gadgetman136

    Жыл бұрын

    Yes the hood can be open. Also, to fix the issue of the security light staying on you must unhook your battery for 30 to 45 minutes or make sure the modules in your car don't retain old memory codes.

  • @bighigh69

    @bighigh69

    Жыл бұрын

    @@gadgetman136 thank you 👍

  • @bighigh69

    @bighigh69

    Жыл бұрын

    I was just going through and checking all my fuses which was a big mistake cuz I must have took the fuse out of the computer or something. Now I got the solid security lock on my 2012 Buick Enclave. I've tried this and the light does not go off after 10 minutes or around 10 minutes

  • @MickCaleb
    @MickCaleb Жыл бұрын

    what happens if my security light stays on and doesn't turn off after 10 min on accessory? 98 gmc sierra

  • @scotttucker4075

    @scotttucker4075

    Жыл бұрын

    we've had a lot of trouble with Pass lock EVO module, You can find them in a junkyard or rebuilt with a lifetime warranty

  • @perceptionpressurecleaning9948

    @perceptionpressurecleaning9948

    Жыл бұрын

    Key out of the truck take the positive cable off for three seconds then tap the cable to terminal three times give it five seconds reconnect the positive cable to the battery and go start the truck

  • @MickCaleb

    @MickCaleb

    Жыл бұрын

    @Perception Pressure Cleaning did this, now the security light is off... but the ignition is not programmed to the passlock2 and the truck will still not start

  • @jimstrict-998

    @jimstrict-998

    Жыл бұрын

    Changed the dead battery in a 96 Buick Regal GS with PASS II. Starter-drive CLUNKS, but no cranking.

  • @dustinstigall8187

    @dustinstigall8187

    2 ай бұрын

    The light was going out for my truck either. After 2 hours of messing with disconnecting the battery and starting over countless times I decided to just turn the key to off and light went out. After turning the key back to on the light was gone so I tried just starting it and it worked. But once again I’ve tried everything I could thank of and it just eventually worked. Late to comment on your question but figured I’d share my experience if anyone new came to the comment section

  • @richardmckibben2384
    @richardmckibben23842 жыл бұрын

    I put a transmission in and now it won't start checks grounds got 12 power to ign and inj but no signal it didn't have that problem before

  • @dustingeise3587

    @dustingeise3587

    Жыл бұрын

    Did you ever figure out what it was? I'm having the exact same problem you were right now lol

  • @richardmckibben2384

    @richardmckibben2384

    Жыл бұрын

    I believe it was a ground wire near the bell housing

  • @scotttucker4075

    @scotttucker4075

    Жыл бұрын

    Won't start or won't crank two different problems,, You can only still crank the engine with a faulty pass lock but the engine will not run

  • @rickl6697
    @rickl66972 жыл бұрын

    You didn't cover the passlock system in my wife's 2003 Saturn ion quad coup. I've replaced the device in the steering column opposite the ignition switch which has some kind of resister in it 3-4 years ago, relearned the resister value and it worked fine until this latest cold snap. It's once again occasionally refusing to start requiring a 10 minute wait. Thanks for posting this video. I don't want anymore GM products. My vehicle is a 2003 Suburban Z71 with 61k miles on it and NO special keys.

  • @jkstdstang

    @jkstdstang

    2 жыл бұрын

    Unfortunately it still has the pass lock system I’m having issues with my 2001 Yukon right now

  • @osirisone6019

    @osirisone6019

    Жыл бұрын

    2003 suburban same issue z71 to

  • @scotttucker4075

    @scotttucker4075

    Жыл бұрын

    If the resistor checks out properly, then you may be having a problem with the past module or the body control module of where the the resistor tells the module that it has the right "key"and then the module sends the information to the ECM to crank and run the engine

  • @lordzson2700
    @lordzson2700 Жыл бұрын

    I dont get it if one key is programmed why do i need to relearn the second key? all keys are same cut

  • @hyatt1982ify

    @hyatt1982ify

    Жыл бұрын

    Because the computer needs to learn the transponder in the key, which is not the same for each key.

  • @robstory8856
    @robstory88562 жыл бұрын

    Ok my question is I changed the motor out in my 2003 Chevy Silverado everything wired back right go turn the key it will not do anything but the pass lock light is on so is that my problem

  • @sharleekuchynka7286

    @sharleekuchynka7286

    2 жыл бұрын

    How did you fix it...same problem here

  • @matthewcraft1676

    @matthewcraft1676

    2 жыл бұрын

    @@sharleekuchynka7286 have you found a fix?

  • @chipkentbaxter2008

    @chipkentbaxter2008

    Жыл бұрын

    2003 has vats not passlock. Have to have vats turned off with tuning software.

  • @GunnyNinja
    @GunnyNinja Жыл бұрын

    Passlock keys do not have a magnet inside. The magnet is in the lock cylinder. The name gives it away. PassLOCK, instead of passKEY.

  • @kittyjessica4943
    @kittyjessica4943 Жыл бұрын

    My 2005 buick century has the security light on when I turn the car on and drive it why would gm do this freaking dumb tf

  • @gunnersports6462
    @gunnersports64622 жыл бұрын

    No passlock? The one that I needed lol :( My key is all metal

  • @aidacaraballo1042

    @aidacaraballo1042

    2 жыл бұрын

    Mine is too. Do you know if it makes a difference???

  • @gunnersports6462

    @gunnersports6462

    2 жыл бұрын

    @@TravisJohnstonthenwbmxr4life no...just do the 3 steps and works. ..the turn the key after the car with the lock disappear and do it 3 times Just don't buy the ecm from flagshipone

  • @MickCaleb

    @MickCaleb

    Жыл бұрын

    @@gunnersports6462 what happens if my security light stays on and doesn't turn off after 10 min on accessory? 98 gmc sierra

  • @Purebeauti
    @Purebeauti2 жыл бұрын

    I’m PK3 & I did this several times and it does not work Now what??

  • @richardmckibben2384

    @richardmckibben2384

    2 жыл бұрын

    Ain't that a load the Colorado I think has a prob w8th bcm but full size don't often damage ecm

  • @MichaelGuy
    @MichaelGuy2 жыл бұрын

    Mine is running with passlock light on..... this procedure does not work.

  • @VileMisanthropy
    @VileMisanthropy2 жыл бұрын

    Ok... no 12v and 5v on the red and yellow wires before the ignition harness.

  • @AllAmericanGuyExpert
    @AllAmericanGuyExpert29 күн бұрын

    I believe that you are wrong about PASSlock. The system is in the lock, not the key. So a copied key of any kind will work as far as I am aware. The system is easy to bypass if you wait long enough, even if you replace a component. But a copied key works instantly. Passlock prevents your knife/screwdriver attack, but most other attacks are just a matter of waiting the 10 to 30 minutes for the relearn, no programming required.

  • @rexmaynard6958
    @rexmaynard695811 ай бұрын

    9

  • @user-gx7nb7gs4p
    @user-gx7nb7gs4p4 ай бұрын

    Mother efer GM the only one who can’t figure to start the car, is the owner themselves. But a real theft? Won’t be a problem.

  • @Guitarsnspraycans
    @Guitarsnspraycans Жыл бұрын

    Then why the fuuuck does my metal spare start my truck, these systems are shit

  • @scotttucker4075

    @scotttucker4075

    Жыл бұрын

    My design the past lock does not care how the switch is turned The pass lock is only looking for the information from the hall effect switch,, unless we are talking about pass lock 3

  • @rexmaynard6958
    @rexmaynard695811 ай бұрын

    9