Glow Plug repair//How to remove stuck glow plug (s)
Автокөліктер мен көлік құралдары
How to extract ,broken tip of glow plug ,use a tap (10-32) to score inside of old plug,then place washer under old plug ,a couple drops of loctight inside the old plug re-insert old plug over broken tip ,using a twisting motion, but donot engage threads,and once loctight (red) has setup ( 4hrs or over night) use screwdriver to pry up with a steady pressure(under washer) while rotating with a ratchet, tip should pull up take your time don't rush,if this helps ,Your Welcome,Jennings
Пікірлер: 17
You're the man! It works. Thanks and hope to see more helpful videos.
Very helpfull mate. I just broke two plugs and I am going to try your technique because I once did a similar thing to a filter and it just works. Many thanks for that post. The idea of a ring to pry the thing up is also BIG. Cheers mate.
I would like to see this in reality and being tested by others. Difficult to believe Loctite is strong enough. However: this could be a top tip.
I changed my glow plugs yesterday on my 300SD and had no issues but you problem is really a not common issue. While you explained about put loctight I was wondering if you leave that part loose inside the block and try to start your engine, the compression would not have enough force to push out the loose part on the block?
very nice video, very usefull. But the title should be changed :D How to remove stuck glow plug (s) cheerz
You just got lucky man
Did you consider knocking the broken plug tip into the cylinder and extracting it from the fuel injector hole at the top at all?
What's inside glow plug ? A neon bulb or heater ?
If you take out the injector, you could have pushed it out with a screw driver.
no sound?
Please put sound back on! No sound at the moment. Thanksalot
9 years old.. Mate did you bite the dust yet?
My tab is not removed screw ie 😤 please 🙏 I made super glue inside Tomuch please please please 🙏 😢 😭 😢 😭
Now I am not still man
I am 12 age my tab is 😢 😭
stuck in a engine HEAD, not BLOCK!!!!!!!!!
The reason for changing the glow plugs was ,engine very hard to start (glow plug impacted with carbon , was not loose)