You ruined the clean look by using jb weld black glue

Great Idea....I suppose to dispose my dinning table and coffee table...but now it has been repaired and more firm the legs.

Crystal clear is uv resistant epoxy resin , it's available to by all over internet, use the one that they use in the making of river tables . Perfectly clear just like glass , I think gorilla makes an epoxy glue aswell just not sure how clear it is, super glue won't work, it will crack and turn yellow in no time . You can also use it to create a film over badly scratched glass tables, but it won't work if you skip the prep .

why the hell wouldnt you have used clear epoxy? now that one round circle on your table is grey while the other three are clear???????????????

Hot air gun to remove metal part from glass. Then soak it in acetone and later brush it with steel wool. Then best is to clean it with bohle's metal primer for uv gluing. Then 3-4 drops of UV adhesive glue + uv lamp for 2 minutes to cure

Hi what’s the thickness of your table? 12mm or 10mm?

Hot air gun to remove old glue from metal, and regular clear superglue from a tube instead of big blotches of dark grey glue as you have done.

It has been more than a year. The join is still Strong.

Good if you don't mind the ugly gray epoxy showing through the top of the glass. I would have preferred Nano470 construction glass glue instead.

Samir, I just Acetone to remove the old glue. Nail polish remover would be the same. I pour some on the old glue, cover with a small piece of title paper to help it soaking. In about 2 minutes, while the acetone is still wet, I used a blade to scrape off old glue. It took me three time repeating this process to clean it up. All done in 10 minutes. Hope this answers your question.

it's really helpful,thank you for the idea

i broke one end of may glass table, how can i join the piece that broke off

hello what is the name or model of this table plz? my moms house is being remodel and someone went in and stoled her table now we need the property management to replace it she has had it for 15yrs. Thank You in advance

How to remove black coated underneath my table, some chipped off so doesn't look good.

I i dont have this kind of metal is it optional where i can use shower .metal rod can that type of metal use

I had problem in my table at a point (connect point)where the top end of stand{ rod } and the metal which stick to the glass,, i want to order the metal which stick to the glass, what's its name and where i can buy?

Thank you for the video. But as long as you sanded the glass, why didn’t use clear epoxy also JB weld?

Any ideas for a glass dining table that has 3 legs broken (not glued) ? Its hard to make it stand up. Any techniques ? should i put some quick glue on one leg just to make it stand and then later put better glue ?

Where did you find the JACK to hold the table, while you repaired/worked?

Which glue we use for glass??