Пікірлер

• 
  @hamidnia724211 күн бұрын

  Oh my god!!!! 5 minutes of wasted life!! Better than before??? Please don’t fix stuff around your house bro

• 
  @kkp429723 күн бұрын

  use DAP extreme stretch elastomeric caulk. It is acrylic urethane. only slightly more expensive than dap 230. You can also spray several layers of 2k clear coat automotive paint to top it off for abrasion resistance.

• 
  @rkhoo734921 күн бұрын

  @@kkp4297 thx for the tips!

• 
  @jayesoteric9106Ай бұрын

  Any ideas for a glass dining table that has 3 legs broken (not glued) ? Its hard to make it stand up. Any techniques ? should i put some quick glue on one leg just to make it stand and then later put better glue ?

• 
  @rkhoo7349Ай бұрын

  However you want to do it, my friend, safety first. I'm sorry to hear that your table has three legs came off. I would not use those broken leg as prop to keep it stand up, that sounds dangerous. Instead I will find a box or container that is strong enough to keep the table up, while you do the repair. The hot pot is to find the perfect height. I will try to find a box that is slightly shorter and use books to shame to the perfect height, just a touch shirt so the table top could press against the legs to be glued. Again please be safe.

• 
  @blasgani2 ай бұрын

  Good

• 
  @AshokKumar-gs2rr2 ай бұрын

  Great Idea....I suppose to dispose my dinning table and coffee table...but now it has been repaired and more firm the legs.

• 
  @rkhoo73492 ай бұрын

  I am glad this is helpful 🙂

• 
  @user-ul1cz5ej9y4 ай бұрын

  joy

• 
  @russ81254 ай бұрын

  Thanks so much for posting this. I made one out of a water bottle cap and kite string. Saved me from pulling the toilet!

• 
  @user-pp3th4dc6d6 ай бұрын

  Amen

• 
  @lavendermarshmallowplant32297 ай бұрын

  I lost my bracelet that's sort of like a string (it was beaded) and I live with my parents so I don't know where all the materials I could use to make that are kept, without breaking some instead, so I hope that my dad and I will be able to find a solution. That bracelet has a lot of sentimental value to me, I desperately desperately pray and hope that I'll still be able to retrieve it.

• 
  @rkhoo73497 ай бұрын

  🧸❤️ I truly hope you can get it back. Dad power! Hope you have not flush it yet. Is it a hard bracket like mine or a flexible one? My method in the video work best for hard one that jams inside the pipe. If your bracket is flexible and magnetic, you may consider use of a flexible rod or metal wire, glue or tape a strong magnet at its tip may work.

• 
  @WhyIsTheClosetDoorOpening6 ай бұрын

  Something similar just happened to me, I lost the ring my boyfriend made me that we call our “engagement rings” bc he has a matching one, they’re not actually engagement rings, but they’re very important to us.

• 
  @HandlerZeo8 ай бұрын

  Can you use this to pair 2 mics up to the same channel?

• 
  @rkhoo73498 ай бұрын

  I do not know because these are two -way digital connections, like Bluetooth. Try and let us know. Thx.

• 
  @yvonnelee43968 ай бұрын

  Great video. Thank you for exposing the industries that take advantage of our ignorance for ridiculous profits.

• 
  @hikersdiarysg413611 ай бұрын

  我們呼求-----We beseech thee kzread.info/dash/bejne/e2SAm7x8dZbah6g.html 主 我 們 同 心 在 你 面 前， zhu wo men tong xin zai ni mian qian 以 禱 告 尋 求 你 面。 yi dao gao xun qiu ni mian 我 們 轉 離 所 有 的 惡 行， wo men zhuan li suo you de e xing 定 意 單 單 跟 隨 你。 ding yi dan dan gen sui ni 主 我 們 是 屬 你 的 子 民， zhu wo men shi shu ni de zi min 求 賜 下 父 神 的 心。 qiu ci xia fu shen de xin 我們要回轉向你父神， 也要看見復興。 主我們國家是屬於你， 求你來掌管全地。 願你來憐憫醫治這地， 榮耀再次降臨。 我們呼求你阿爸父， 設立你寶座在這地； 你必睜眼看側耳垂聽， 奉主名的呼求， 萬民都要來敬拜你， 榮耀高舉你的聖名； 復興這地， 全能的君王， 我們歡迎你。 #########

• 
  @valeriexoxo11 ай бұрын

  Thanks for the idea! Next time show us the process on camera

• 
  @sushantrane131311 ай бұрын

  My glass is tainted where the glue should be pasted hence UV light is not working, pls suggest an alternative

• 
  @ramilapatel20811 ай бұрын

  I want transperant adhesive which name is glue i buy

• 
  @rkhoo734911 ай бұрын

  You should use UV cured glue nowadays 😀

• 
  @kataysmith958111 ай бұрын

  Thanks for giving a detailed explanation! Very Helpful.

• 
  @SHINeeWORLDDDDD Жыл бұрын

  ❤

• 
  @SHINeeWORLDDDDD Жыл бұрын

  Thanksss

• 
  @RichRich007 Жыл бұрын

  why the hell wouldnt you have used clear epoxy? now that one round circle on your table is grey while the other three are clear???????????????

• 
  @swimmingnwinning Жыл бұрын

  Thank you for sharing. What a great idea to reduce out waste output.

• 
  @MichalHalczuk Жыл бұрын

  Very helpful video, highly recommended. Also - probably best to patch it from the inside, so that nothing grabs on the edges of the patch.

• 
  @rkhoo7349 Жыл бұрын

  Thank you for talking the time to add your tip. Good idea. If the glove lining material does not sticks well to the glue and patch, you could experiment by flipping the patch so that the lining is to glue with lining material.

• 
  @sharonteh6506 Жыл бұрын

  我一生最大祝福認識主耶稣。我的神，我的主永不離棄，主真好。Amen

• 
  @lessa_may Жыл бұрын

  Is that can be des mantle?

• 
  @rkhoo7349 Жыл бұрын

  When I did a side drift, the boat caught a it's own wake (ripple) and there was a great deal of water splashed on the prop, thus the noise and water on the cam. No flipping in that occasion 😜

• 
  @TrailcamsRCPhotoFlying2000 Жыл бұрын

  What happened at the end, did it tip over ?

• 
  @yenrabe3418 Жыл бұрын

  So ingenious !

• 
  @maine9319 Жыл бұрын

  Thanks for sharing this useful tip 😊

• 
  @pinetopthomas4100 Жыл бұрын

  Great video. I have this exact lift kit and your tips will come in very handy.

• 
  @visalakshipasagada962 Жыл бұрын

  What is the name of glew

• 
  @rkhoo7349 Жыл бұрын

  I used Gorilla Super Glue; but any instant glue liquid based on Cyanoacrylate will do.

• 
  @anawilson7782 Жыл бұрын

  How did you remove the legs?????

• 
  @user-ew2tb1pl3t Жыл бұрын

  已經有桂格就好

• 
  @cmurder1 Жыл бұрын

  Thanks for this great idea

• 
  @rodeoclown.futurist Жыл бұрын

  Appreciate you for passing this concept on.

• 
  @rushelldavidson1740 Жыл бұрын

  I i dont have this kind of metal is it optional where i can use shower .metal rod can that type of metal use

• 
  @cristopherroberts9098 Жыл бұрын

  😎

• 
  @Preeti_R_Das2 жыл бұрын

  I lost my engagement ring। Is there any help

• 
  @andyMSH7002 жыл бұрын

  I got a Typhoon and was very dissappointed with the quality. It skews out of fast loops and RCRCM was not able to answer why this was happening...and it's not a snapflap issue either. The elevator mechanism is very poorly made as it wobbles and I get 25mm on the tip of the elevator which is not good. The suggested stock motor burnt out also so I had to buy one with a gearbox costing around 200 dollars. I would never buy another model from RCRCM as you only get talking to Linda Lue who is not technical....but I think this is intentional...is it even a woman? They would not accept a return and only I had invested so much time into setting it up I would have returned it using my credit card return process. Not at all impressed.

• 
  @tubman47942 жыл бұрын

  請問有否英文版唱歌版？🤓

• 
  @tanvirahmed85852 жыл бұрын

  Thankh you for this video. It is helpful.

• 
  @yolande12762 жыл бұрын

  If I accidentally flushed a kitchen sponge into the toilet would it have flushed away? It was very soggy and not firm. The toilet is still flushing but I’m worried 😦.

• 
  @rkhoo73492 жыл бұрын

  Hi Yolande, thx for dropping by. I am not a professional, but I think if your flush water is strong and your sponge can bend easily and it is already swelling and your pipe is relatively smooth -- then I will not worry about it. Like you said, you will know if it stop flushing. Enjoy your day :)

• 
  @applehair9952 жыл бұрын

  Is this WD Weld clear when it dries. What glue do you recommdnd if you wish it to be clear since this is glass?

• 
  @rkhoo73492 жыл бұрын

  Nowadays, you should use UV cured clear resin glue. My method works but not good looking :)

• 
  @linieong3932 жыл бұрын

  👍👍👍

• 
  @RustyRazor92 жыл бұрын

  Inorder for those lovely sea turtles not to chew these rubber jelly fish, i did this BUT am using the wrong Super Glue, till i watched your suggestion. Thanks Khoo ~!

• 
  @sarvs50thaltacc152 жыл бұрын

  I accidentally dropped my penny inside the toilet I found that out when I was using it

• 
  @vangrindz86502 жыл бұрын

  Nice! I thought about getting one of those Black and Decker work benches. Do you think the skis can be clamped into the workbench directly by the bindings? I'd only be interested in making sure the base is elevated for waxing.

• 
  @rkhoo73492 жыл бұрын

  Van, I would not clamp directly to the bindings because they are not designed for compression from the side. If you already have the bench, give it a try and let us know. Go easy on the clamping force :) I saw someone on KZread who shaped a piece of wood which acts as the base of a ski boot to be clicked to the binding. Then that wood was clamped to the bench. You can then adjust the height. Remember to cover up your bench or the wax will make a mess. Have fun!

• 
  @aahen53032 жыл бұрын

  ...lol the gluing process was so tedious ended up ripping the hole even more and super glueing the piece to my fingers :/

• 
  @morningprayer-44332 жыл бұрын

  大神带你到我评论里说你可以走得更远！ 是的，你会赢的，继续崇拜他吧🙏

• 
  @tolitsdterrible47852 жыл бұрын

  This is pure stupidity. Sorry.

• 
  @kojam12 жыл бұрын

  Great vid! I just bought 2 of the smaller box one. They don't give the distances for installing the pulleys. WTH?! U must be an engineer. Your analytical way of looking at things is practical ... Thanks.

• 
  @rkhoo73492 жыл бұрын

  I am glad my video helps.

• 
  @zitaorosz19752 жыл бұрын

  acetone does not work to remove that glue. I also tried rubbing alcohol to soak overnight.

• 
  @itsgonnabeanaurfromme Жыл бұрын

  Huh and yet it did