Приємно бачити інструменти від Володимира. Гордість бере за таких людей. Слава Україні!

@10MinuteWorkshop

6 ай бұрын

Завжди! Найкращі побажання з Лондона. 👍

Thanks for that list, it's nice to see so many inexpensive tools and gadgets for under £20. I'll link it to the wife and kids in the hope of not getting any more novelty socks or offensive T-Shirts for Christmas and having something useful instead. I'll buy myself some pastry brushes as they will be super useful and peeling off dried wood glue is nearly as satisfying as popping bubble wrap.

Christmas? Works great for father's day as well! Birilliant list.

Thanks Peter, it's always worth hearing what you come up with for these lists, I shall certainly be after one of those Olfa knife/saw combos, for a start !

Things similar to the Messfix measuring stick with the built in tape have been around for decades in the surveying business. Takes me back to a sphincter tightening job I did with a mate, holding onto a really long one of those, with one end in a full swimming pool and a thunderstorm coming in as photos were being taken for an architect to get building approval for an extended roof. Luckily we finished before the storm arrived over the property.

A great list as usual Peter. Thanks for the ideas.

A very enjoyable video Peter, need to watch it over again and choose my next purchase of shiny fings ! ... Thank you.

Fun list Peter. Thanks. Have a good weekend.

I just use reusable velcro cable ties to strap paddles down and triggers depressed, Bosch also make a bit set with a palm ratchet in it which is quite handy for a similar price to the one featured but without the holder in the handle

I had the same thing happen with the advent calendar, I got my granddaughter to rearrange them for me, she loved doing it :-)

I can see that measuring stick coming in very handy for when I go to measure up for my installs and like you say it would pay for itself over time. Takes me back to the early 80’s when I was an apprentice and all the old boy carpenters would use a rod (story stick is just a too new fangled word and should be banned immediately)…😀

Thrilled to share, that I am the proud owner of the laser level ( got a tripod too), also the Hultafors measure and the mini wrench which is now my favourite tool, bought my wife the refillable touch up sticks she loves them. Thank you Peter for creating the list, every year there something I put on my list from yours .

@10MinuteWorkshop

5 ай бұрын

Good to hear, thanks! 🙌👍

Great video Pete, will come in real handy to replace the xmas socks lol

The 2 priceless gifts that you can’t buy - experience and patience. Once you’ve got the basic, accurate tools, then everything else are nice-to-haves. You don’t need them but you might like them. Those priceless gifts require time and mental training (at least patience did for me). Get out in the shop without the pressure of having to make something by some defined date and just practice - maybe chiselling, maybe accurate hand sawing, maybe all the features of the domino. Just ask the other half for the precious gift of 3 hours every weekend of being allowed to play.

@10MinuteWorkshop

6 ай бұрын

Time, the ultimate gift! 🙌

Interesting as always. For taking temporary notes I can recommend bambook: spiral notebooks where the pages are thin whiteboards that you write on with an appropriate marker and erase again when no longer needed. They come in different sizes and the type of “page” can be chosen (empty, lines, squares, dots).

@10MinuteWorkshop

6 ай бұрын

Thanks! 👍

A lot of great products there Peter and there’s quite a few I didn’t know about so thanks

@10MinuteWorkshop

6 ай бұрын

Thanks! 👍

Thank you.

Hi Peter, great ideas very impressed good items for the workshop, I liked the suction cups always handy pencils we all need pencils and I do like the twin end Sharpy and the pain pens brilliant items for the workshop and packers they are good but I'll stick to my 2p coins. As always a honest views and a great video, Take care

@shaun30-3-mg9zs

6 ай бұрын

Sorry Peter I meant Paint Pen's

Its 'Tat' wonderful time of the year!

I would never, ever use the measuring stick in anger, but OMG do I want one now 🙂

@10MinuteWorkshop

6 ай бұрын

I know, right? 😂 🤷‍♂️

Thank you Peter. My presents sorted!

@10MinuteWorkshop

6 ай бұрын

Cheers Dave! 👍

Those Earfun ANC ear buds work great - esp noise canceling in the shop.

Awesome video, thanks for the info. New subscriber.

@10MinuteWorkshop

6 ай бұрын

Thanks, and welcome! 👍

I have an old Shark Saw which is like a slightly larger version of that Olfa knife/saw combo. Had it for years and it's very useful but not sure if you can still get them. Also Facom do several versions of the micro bit ratchet, one of which has a locking flexible head. They are a bit more premium price tag, but really good for tight access jobs.

@tlangdon12

6 ай бұрын

The Wera micro ratchet is the best one. I needed one for a job, and I broke two different models (including the one in Peter's video) trying to find one that was strong enough. Only the Wera worked. There are videos of it undoing car lug nuts that have been tightented to 80Nm of torque!

@davidhull2060

6 ай бұрын

@@tlangdon12 I have both the Facom and Wera. Both are very good...the Wera has the smallest head, but the flex head on the Facom does allow access to very awkward spaces.

Looks like Ralph's new square is a direct copy of woodpeckers indexable square. Anyway, your videos are great. Keep it up.

@10MinuteWorkshop

6 ай бұрын

Thanks, but as always, this kind of feedback is much better directed at Benchdogs.co.uk if you want to affect change of some sort. 👍👍

The measuring stick is interesting, I hadn't seen one of those before. How do you feel about the cheap and cheerful laser measure? Usually working along and needing to measure awkward spaces I find them very useful, I sometimes double check with a tape but it seems to come in pretty accurate (usually too accurate and I need to take a bit off to accommodate a wonky wall 😂).

@10MinuteWorkshop

6 ай бұрын

I also have a laser and find it to be slow to use, especially when making multiple measurements to find eg the lowest point of a ceiling in a recess or alcove, or the narrowest width. I don’t need each individual measurement, just the smallest number and with a laser I have to write that down. 🤷‍♂️ First world problems and all that. 👍

@gingerelvis

6 ай бұрын

@@10MinuteWorkshop for jobbing work the measuring stick would pay for itself in no time. I have a terrible memory for measurements so have to write them down whatever method I use 😂

@10MinuteWorkshop

6 ай бұрын

@@gingerelvis Yes! At least with the old 'two sticks' method you could just find the lowest point, then measure the sticks! 👍

Ordered a laser been after one for a while just for odd jobs around the house. Thanks Peter....

@10MinuteWorkshop

6 ай бұрын

Thanks! 👍

I knew I shouldn't have watched this. So suction cups, wera stubby and small ratchet thingy ordered. Stocking fillers I'll tell the wife!

@10MinuteWorkshop

6 ай бұрын

😂👍👍

the messfix measuring stick intrigues me , i would like to see a video on it showing where it can be really usefull. i use a laser measurer and find it works perfcectly.

@10MinuteWorkshop

6 ай бұрын

I also have a laser and find it to be a pain in the neck, especially when making multiple measurements to find the lowest point of a ceiling in a recess or alcove. Horses for courses. 🤷‍♂️

Hi Peter. Great video thanks. What advantage would you say the measuring rod has over a laser measure? Seems like they would do the same job and possibly the laser is even more accurate and a lot cheaper?

@10MinuteWorkshop

6 ай бұрын

Simplicity. I have a nice Bosch laser and the damn thing always want to give me the volume of a space, or randomly switches units to imperial, or puts the laser pointer on instead of taking a measurement. Also, no batteries required with the stick. 👍

@Brianb_ie

6 ай бұрын

@@10MinuteWorkshop 😊 in fairness that’s very true. The straight up reply I use for so many other things in my woodwork. 😂

Hi peter had a wee chuckle at the black thumbnail I have the same 🤣hand to eye coordination not what it used to be 🤣

@martintheron1386

6 ай бұрын

Read my remedy

@10MinuteWorkshop

6 ай бұрын

Extractor bit me as I was getting it back into the cage. 😕

Great vid Peter.....something for everybody there. Would you or any of your followers know where to buy ( or if such a thing is available) a Makita guide rail attachment to accept a Trend T7 router ....for routing straight rebates using a guide rail. I know I could use the high profile on opposite side of the strip , but an attachment would avoid any danger of a climb cut.

@10MinuteWorkshop

6 ай бұрын

I don’t know of one specifically, but my first port of call would be Etsy, then eBay. 👍👍

I once had some secondary glazing fitted to my very 'airy' first flat in South London, Peter. The guy (from Everest) used something similar to measure the aperture, but from memory it was something that was a box section, not a round tube. It expanded and reduced within the window frame aperture and gave precise measurements, but I think from memory, he also used it to note any angle as well?! I might remember this wrong. I asked him where I could buy one from and he said, 'You can't, they don't sell them'. I've long lusted after one of those. Maybe someone can enlighten me what they were. Maybe they were in fact your Messfix tool. The glazing fitted absolutely perfectly.

@10MinuteWorkshop

6 ай бұрын

First time I’d seen one of these Gary, but a couple of folks have said they’re quite commonplace in other industries. 🤷‍♂️👍

Buy new sanderS'' ?? P.Millard 2023 6:41🤣😂 Enjoy the gift list Peter! 👌

@10MinuteWorkshop

6 ай бұрын

Well, you can’t have just one, right? 🤷‍♂️

For some reason the link takes me to my orders summary, not the actual item. Link the full list is ideal, thanks.

I use a leica laser measurer for internal height measurements, i'm sure it can't do all the Messfix 'compact' can do but it does fit in my back pocket.

@10MinuteWorkshop

6 ай бұрын

I have a Bosch one. Works really well, but taking multiple measurements across eg a ceiling to find the lowest point is a note-taking pain in the neck. A simple measuring stick works. 👍

Peter Millard x MKBHD is the 2024 we need

@10MinuteWorkshop

6 ай бұрын

😂 It’s coming! 👍

Hi Peter, thanks for the list and for bringing it forward to get a deal. Re the Enventor is there an advantage to a green level over a red level? The red is even cheaper but maybe is not in your Amazon shop.

@10MinuteWorkshop

6 ай бұрын

The green lines are supposed to be easier to see, generally. The Enventor red line laser is only rated to 15m, which suggests to me that the optics aren’t that great ie you’ll get the line spreading along its length. If you’re only using it over shorter distances it should be fine, but for an extra 8 quid or so the green line 25m is the one I’d recommend. 👍

@dgmx5

6 ай бұрын

​@@10MinuteWorkshopI knew there would be a reason. Thanks

I notice you always use brad point bits when working with wood. Can you please tell me what brand you use? Many thanks, dan

@10MinuteWorkshop

6 ай бұрын

Not always, but if I want to locate a hole precisely then they’re the bit for the job, yes. I have a set of Fisch brad point bits that make a very clean exit hole, but there’s plenty of others that do the same. 👍

The story stick $645 in Australia, damn.

@10MinuteWorkshop

6 ай бұрын

Ouch! 😕

Just let the wife see the video and told her this is what I would like for Christmas. She said “ what would you like “ . Everything 😅

@10MinuteWorkshop

6 ай бұрын

😂😂👍

Hi Peter, for some reason the link for the silicone pastry (glue) brushed doesn't appear to be working. Can you take a look? It's only cheap but would hate for you not to get the money from a qualifying sale. Might also be worth you checking some of the links on your amazon store. Went to order some Leyland primer the other day and I think the link needs an update.

@10MinuteWorkshop

6 ай бұрын

Thanks; links are working fine, not sure what your issue was ie the link didn't take you to the right product, or if the link just didn't work for you, but it's working as expected here. BTW everything is in an idea list on the store here - amzn.to/3R6GjHG - and provided you land on the store following one of my links then typically anything you purchase within that 'session' qualifies. Thank you! 👍

A laser measurer is smaller, cheaper, and more precise than the extendable story pole thingy.

@10MinuteWorkshop

6 ай бұрын

I have a nice laser measure. It’s smaller, no cheaper, I more accurate, and a pain to use when you’re taking several measurements to find the lowest point in a ceiling. But if you have one and you’re happy with it then you should keep using it. This is a gift ideas list, buy them or don’t. 🤷‍♂️👍

@acerjuglans383

6 ай бұрын

@@10MinuteWorkshop lol

Forgive my ignorance as im still very much learning (This channel has been great). Why would you chuck the phillips heads out? Is it just a preference for PZ heads?

@10MinuteWorkshop

6 ай бұрын

Long running joke with my old podcast partner Gosforth Handyman. You almost never. One across Phillips head these day, just pozi - but every bit set include Phillips. 🤷‍♂️

@andysweetland8645

6 ай бұрын

I think the reason that Phillips drivers still appear is that they are still (?) very common in electronics stuff of all sorts. @@10MinuteWorkshop

my favourite video always add something from it to my Christmas list, have been thinking of a laser for some time , would you buy a tripod as well ?

@10MinuteWorkshop

6 ай бұрын

Thanks! Not personally for the tripod, no - I have plenty of those, and this laser also has a magnetic bar which gives a few more options. 👍

@barclay50

6 ай бұрын

Thanks, think I’ll add one to my Christmas list as I haven’t got one 😄

I found the Olfa on Amazon but for some reason the product name and description is in Spanish, and the price is somewhat higher than you paid elsewhere.

@10MinuteWorkshop

6 ай бұрын

Thanks. Yes, I found that too, so as I said in the vid, you really need to google it as I’m not linking to that nonsense on Amazon. 👍👍

I think the note should have read “don’t buy more sanders”. ;)

@10MinuteWorkshop

6 ай бұрын

I *need* more sanders! 😂

Hey Peter, can y please put a link to the hammer that cracked and blackened your thumbnail! OUCH!

@10MinuteWorkshop

6 ай бұрын

It a hammer - extractor bit me while I was putting it back in the cage! 🤷‍♂️😂

Whatched with a responsible adult 😂

@10MinuteWorkshop

6 ай бұрын

😂👍

for the sander.. can't you just use dubble sided tape or hot glue?

@10MinuteWorkshop

6 ай бұрын

Of course. And I’m sure the person I’m giving it to will be thrilled with that. 🤷‍♂️

@gillesek4509

6 ай бұрын

Well, I mean that not everyone has a 3D printer and sometimes solutions can be simple and without spending money 😉 Thank you for the nice videos

HI peter, I have been working for a few months on a 3D printed product for MFT bench tops, 3D printed magnetic plugs for dog holes. Would you be interested in taking a look at them?

@10MinuteWorkshop

6 ай бұрын

Hi Dean. Happy to take a look and provide feedback, but no promises that I'll put it in front of an audience. Don't know if you're aware but Benchdogs.co.uk do a similar product - I featured it in the previous gift list, or maybe the one before that? Shoot me a message through the website at 10minuteworkshop.com, OK? 👍

@deandavies1462

6 ай бұрын

@@10MinuteWorkshop thanks, message sent.

You've forgotten the Screwfix Christmas jumper!

@10MinuteWorkshop

6 ай бұрын

Oh no I haven’t! 😂

@davewright9312

6 ай бұрын

Does anyone actually buy them ..I asked at my local store and they laughed and said no

@DukeofDave

6 ай бұрын

@@davewright9312 I've bought 3.

Such YT content presents difficulties for me. In the old days, I could leave some brochures lying around in "what can I buy him?" season... Oh well, we can all do with another pair of slippers.

@CabinetFramingUK

6 ай бұрын

Get one of those digital photo frames and leave this playing on repeat 😂

@10MinuteWorkshop

6 ай бұрын

😂

@10MinuteWorkshop

6 ай бұрын

I could do a Gift List catalogue with QR codes? 🤔 😂

@gav2759

6 ай бұрын

@@CabinetFramingUK OK, but first I need a digital photo frame brochure. to leave lying around.

How about an extra thick rubber thimble to cover your thumb ….!!!!????😁💪🏻

@10MinuteWorkshop

6 ай бұрын

I’d pay good money for one of those! 😂👍

I surely can’t be the only person that gets “Ricky Bobby Hands 🙌 “ vibes from Peter, the millisecond YT allows gifs you better believe I’m posting hands one

@10MinuteWorkshop

6 ай бұрын

I’ve no idea what that is and honestly, I’m scared to google that on a family computer… 😂

@worstuserever

6 ай бұрын

​@@10MinuteWorkshopMy search history would already make Satan cringe, and I was curious so I looked it up. It's a reference to Will Ferrell's racing driver character in Talladega Nights (never seen it) who doesn't know what to do with his hands while being interviewed. I can see where edgar0517 is coming from and don't see any negative intention. There is a momentary resemblance to your idiosyncratic mannerisms, but the movie character is your polar opposite, awkward and stilted whereas your distinctive gestures come across as thoughtful, outgoing and expressive. Hope this hasn't just made it weird, or maybe I just did by saying that. 🙃 Anyway, I like everything about your presentation style, and now I want one of those stupid measuring poles even though it's no bloody use to me...

Okay - you’ve just cost me a few bob ☺️

@10MinuteWorkshop

6 ай бұрын

🤷‍♂️ I don’t sell anything, I just make people want to buy… 😬😂

A very British list with a laser that starts at 3mm and ends at a 1/4 inch……… The domino height stop looks brilliant, can’t justify buying a 3D printer just for that……. 🤔

@10MinuteWorkshop

6 ай бұрын

Actually a nod towards our American cousins; and you don’t need at 3D printer - just need to know someone who has one! 😂