first

@KevinTalbotTV

Жыл бұрын

Boom!

@audiwankenobi361

Жыл бұрын

I was actually first but I erased my comment so that you or someone else could enjoy the pleasure of being first this time.... You're welcome.

@Woza3.8

Жыл бұрын

Yes! More money to spend

@antonjuliodelossantos2988

Жыл бұрын

​@@KevinTalbotTV BOOM!

@peanutfilms8210

Жыл бұрын

@@audiwankenobi361 sure buddy

The high adjustment screw (or throttle screw) is the one closest to to the air filter. The screw closest to the engine is the low (or idle screw). There is a thin wire that goes to the coil (not the one that goes to the spark plug) it must be grounded to the engine to kill the engine. Follow this wire and check for a loose connection. I hope this helps.

@abemack

Жыл бұрын

boost

The channel needs more 5th scale content like this 🔥

@steelcityrc133

Жыл бұрын

I agree.

@spoolyboi9434

Жыл бұрын

@ZAC HARDLE really a waste of time and money unless you have money and time to blow would require alot of modification I've asked and seen similar asked in some 5th scale groups and forums, plenty out there that's a direct fit and not oversized that would out perform that 110 in most cases

@johannesb.1658

Жыл бұрын

Yes

@JetskisAndDirtbikes

Жыл бұрын

Yeah cus that was so cool? Lmao that was so dumb

@spoolyboi9434

Жыл бұрын

@Richard Ward how? Yeah it didn't go so well but nobody's an expert but if you are feel free to share that knowledge my friend

Do a monster slash build

@Bentleys_Rc

Жыл бұрын

Yes we need that

@shepshepson

Жыл бұрын

Traxxas slash? That would be epic

@jackfletcher8672

Жыл бұрын

@@shepshepson yes slash

@rcb1299

Жыл бұрын

something more ppl could relate to lol

@s109apache7

Жыл бұрын

Fr

I just love how Kev's "failsafe" is full throttle 😂

@nathandavies2677

Жыл бұрын

😂

I feel sorry for Kev, because he can’t experience the excitement us fans have when we see that notification 😄

@thatcrazyguyjay

Жыл бұрын

thats true lol

@TheRvg03gt

Жыл бұрын

He gets the same feeling from porn hub!!!

@bossmanprezzie8923

Жыл бұрын

So true.. by far the most entertaining creator in my subscriptions!

@toysforboysrc

Жыл бұрын

I’m sure the feeling is comparable when the views start to come in👀

@TurtleRc

Жыл бұрын

No matter who you are there is still someone you will idol. Me definitely Talbot. What happened ¿? Lol

Kev, on my dirtbike filter I only use 3 drops of air filter oil as per manufacturer instructions and rub it in. If it's too saturated the engine will run inconsistently causing you to chase the tune. Not sure how much oil you use but it seemed a bit much for such a small filter. You want just the outer surface saturated to prevent dust particles in dry conditions from going in the carb. With that said. That is a sick build!

@KacKLaPPeN23

Жыл бұрын

Which brand? I don't know of any of the major brands recommending underoiling filters by that much. Most recommend to saturate it, remove excess with a towel and then let it dry (yes, air filter oil dries a bit and becomes even more sticky through that).

@rcmaniac77

Жыл бұрын

When i rode motocross for the crf 250 i drenchd the fikter then squeeze exess out let it dry a bit stick it in

@SUPRAMIKE18

Жыл бұрын

That exactly what I've had happen to me, because the filter is clogged up with oil it effectively works like a choke and screws with the air fuel ratio.

@SUPRAMIKE18

Жыл бұрын

@@RyanMcIntyre I think it actually comes down to the size of the engine, the smaller the engine the more sensitive it is to changes, especially with the intake side. Dirt bikes are probably better off with a drenched filter.

@fugginrambo

Жыл бұрын

​@@RyanMcIntyreSo you're saying my alcoholic father wasn't supposed to leave a rag in the air-boot and then put the filter on? It really smooths the power out. LoL 😊

I wonder if you can get an after market fan to help cool down that engine?

I don't think people understand how much effort, work, and time this takes for Kev to do what he does. He fully deserves all his success, he's less than 0.1% of the population who have this in them. Admiration.

@toysforboysrc

Жыл бұрын

I agree…. I never knew how to properly appreciate content creation and what a “great video” takes and what it means. I’ve changed my perspective ever since I started treating my Chanel as if raising a child and how to put my viewers before me.

@tomwhite9551

Жыл бұрын

@@toysforboysrc great to hear 😊

@toysforboysrc

Жыл бұрын

@@tomothybahamothy … Good jobs are supposed to be easy, that’s everybody’s dream. The hard work comes first and the payoff comes later after sacrifices are made. Whether the students fail or succeed is on them. Kev obviously took courses and read books so obviously some people are cut out for this career and some aren’t, that’s just how it is🤷‍♂️

@watsupgardeners4023

Жыл бұрын

Kinda easier to do when it's your hobby

@theprogamer4371

Жыл бұрын

the fact that he built a monster truck just blows my mind

Man these 5Ts hitting jumps and taking flight is something else!

@antilagboostaddiction8322

4 ай бұрын

Foreal cause i dont want to do it to mine lol

I would try a different kill switch. Killer bee is the one I use. Also you’re geared to aggressive. That is why it was heating up like crazy. Also you probably should break the motor in proper before ripping like that. Just my take.

What a monster sized engine. Wow!!

Thanks for all the AWESOME content, Kevin!

Finally a big 2 stroke petro engine that moves a vehicle like it's supposed to.

Haha Kevin is like a kid in a candy store. When he gets excited then we get excited too... I was thinking the chassis was not going to hold up with the weight of that bigger engine. LOL Kevin cannot resist big jumps...

your break in process is quite unique 🤣🤣🤣

It is always wonderful to see how much a vehicle can take by bashing it as hard as you do. I would like to see everybody do some races together again!

That metallic sound is the motor bearings that could have been damaged by taking such a big heat, it happened to me with the rc gas boats

If you get a engine too lean it actually starts dieseling (tip of the spark plug actually glows)& won’t stop even if you pull the spark plug cap. the best thing to do is hit the kill switch &open the throttle this will dump fuel in & cools the engine. Or just cover the intake with a cloth

It was always gonna get a hammering when he went out with max 😂 chassis bent already, at least we get to see it bashed at the skatepark now 😂

that metallic sound is sometimes mentioned as the engine seizing sound, especially when not runned in engine gets hot, that is like number one thing that should not be done to new engines, but it could be just some random stuff rattling around in there... by the way, try to put some stuff into the front and rear diffs, they are still super loose, especially with that overpowered engine that blew the tires pretty much right off🤣

If a 2-stroke engines doesn't wanna turn off, you can always just block the exhaust, like put your shoe against it or something. Saved us and our engines many times! ;)

Lean with no load can cause runaway but if the kill switch works it could be a loose carb or case leak

That thing sounds sick!! Bloody awesome

Hell yeah Kev! Keep this content coming we love it ❤ Big shout out from your Aussie brothers !

You make building these things effortless. It would take me days of trial and error to get this one running😂

So crazy idea for the tuning but kev what if you take the nitro/petro cars to a car tuning shop or a dyno company hook it up to a o2 sensor to get air fuel ratio challenge then to tune it or get a Holley efi box and run the o2 system that way in the shop

Nothing like waking up on a Tuesday to watch a some KT rippage!!

Best sounding engine so far.

As others have said, we def need some more 1/5th scale content with speed running and bashing these monsters! Would be fun to drop the biggest and most powerful engine you can find in one of these 1/5 scales and let it rip! Cheers Kev👍

With Spektrum radios, you have to remember to re-bind after you get done setting up your radio sub trims, trims, travel, etc. The failsafe servo positions are set during binding.

I just love this guy's videos!

That was over power 💥

Absolute monster! amazing stuff indeed 👌

Love it mate jumping this beast like a 1/10 scale 😂 awsome vid and taylor rc absolute best just purchased his outlaw 88cc absolute beast would love to see you do a review on that 👍

Not sure if you will read this, only because you are such a big channel, with tons of comments all the time. But I love this channel. I had a "main channel" that I was working 40+ hours a week, with very little to no growth on it. I sort of quit that channel, and started this new channel about my dogs. And when I did, I found your video of the German Shepherds chasing your RC car, and ever since then I have been hooked. Using your channel as a guide on what RC car I should spend my limited funds on for the most enjoyment for them. I believe I will be saving up for the Traxxax Maxx. Why not go all the way right? Anyhoot, I love your videos on this channel, and find so much joy and pleasure out of watching all of them. Now, let's go RIP!!!! YES!!!!!!

5th scale is awesome but they're so loud! Especially if you have upgraded exhaust. You definitely need a good place to run them if you want to be considerate to your neighbors 😂

Kevin, you are an expert by the way. Not sure what kill switch you are using. But I have hand many brands and they are not all equal. Sometimes you need to reverse the wires to the coil. And you can have less interference.

Ask Taylor what the run-in carb settings are. There should be a certain number of turns out from all the way turned in. For my chain saws its like 1 to 1-1/4 turns out for the L and H. the 3rd is your Idle speed that you can adjust to your liking. You would think something like that would be included with an engine of that caliber.

@ihelpyou3

Жыл бұрын

silverhaze78 ya i agree i don't know much about moders thats because im 13 but ya

@jeffreyfowler7707

Жыл бұрын

It's 2 and 1/2 turns out from bottom !

Max really does break everything!

We want more videos 😊

hah, Kevin has built a monster again~ Always feels relaxing to watch how Kevin assemble his new rc. Another topic is I've bought the official Traxxas Steel CVD upgrade for WideMaxx, and a Yeah Racing Universal Set-Up System for on-road cars~ both of them are good companies!

Love your videos!!! Watch them every day on my lunch break! Just got my first 2wd slash and building a 4x4 now

lol - brilliant Kev. I think you prolly need to look at the amount of oil you used for the air filter? Thank you as ever!!

Mesin RC car nya....tenaga nya...tenaga monster....mantaaappp brooo.

I look forward to these particular videos....they really do act as a great reminder why I never want to own or run a Nitro or Petrol car ever again...

Kev. Nitro and Petrol cars go into a lean condition when the tank gets below 1/8th. We used to run a large in-line fuel filter on our cars and trucks to help that lean condition be better by aerating the fuel better. Also you can get a fuel line pinch kit to shut off fuel flow so the engine will stall if the kill switches happen to not work again in the future. Cheers.

That RC car is more powerful than my car...

Kevin! Things are getting out of control with these motor sizes. Next I expect you to turn the Lambo into a "full size" RC car.

I want to see that giant engine in the smallest car possible!!!

@JohnSmith-lm4nn

Жыл бұрын

I like that idea too

Kevin, does Taylor RC make a muffler like that you can put on the Raminator so it's not so loud?

More gas and nitro videos please ⛽️👍

this car is absolulely , i have this car too , but the original.....😁😆😉👍👍👍

That Taylor RC engine looks like a BEAST! I’ve been fixing/repairing small engines like in strimmers and lawn mowers and so on for years now and I get that sick of them, all my own equipment is battery powered now. Same with the RC cars. Awesome to get going but spend more time pulling the starter than driving the damn things.

@calcifiedbonecollector3222

Жыл бұрын

Exactly it isn't worth the hype. Gasoline/Nitro rcs are a pain in the ass!

@dzydvl76

Жыл бұрын

Heat up the motor with a heat gun. Never try and start a cold motor.

Wow Kevin I can believe The engine did that too you!!??? I do know why because you got trigger happy as soon as it started running...you should of ran it in proper!!! Lol but what do I know!!! Your the man Kevin!!! absolutely ran the Balls of thats new engine!!! Great videos as Always man!!! Thanks for your content!! Outstanding

Hey kev,love ur content mate.if u want a bashproof/kevproof chassis recommend looking into the UFC performance chassis.

Looks great Kev. Great job..

Thanks for the great content Kev, been a fan for a long time.

Hi Kev, this comment to not relate to this video specifically, I just wanted to thank you for getting me into the hobby. I am a complete newbie so the obvious first car was an 8S Xmaxx 🥴as it was second hand from eBay I have had quite a few of the retaining nuts on the plastic chassis strip. So I thought I would share a tip to the solution I thought off (apologies if you have done this and I missed it). Anyway, I found if you have enough area you can drill out the old hole and insert a metal furniture retaining nut using a hex driver. The bolt will then have a solid metal fixing. I hope that might help someone out. I'll put a link in the next comment as I believe sometimes they get blocked.

Love the gas engine rc cars😍

Time to do some really good upgrades for it (Losi 5T) I like that rc

Your videos are so enthusiastic and amazing! Love your vids!

I love watching your videos from south Australia keep up the good work😊

❤my favorite channel thank you Kevin for your shares have a nice day 👍

It's going to absolutely rip! The differential to pieces

You might need to put a valve shut off for the fuel line for an emergency shut off

Kevin I had your same symptoms happen on an Honda 85R to some kids, the only way I could get it to happen was get it hot in 1st gear. What it's doing is heating up and advancing the timing and running away. Which can also happen to an engine braking in with in adequate air flow, or making pulls or hits without making a few breathing laps. Hope this helps

Petition for Kevin to grow a mullet he half way there

Hey KT! That's a Awesome build on the 5T and sounds great with that pipe! When You and Maxx get together running rigs it doesn't usually end well and the run-in on that New engine running lean and low on gas and running on its own and that runaway you got Lucky you didn't wad that machine into a another pile of parts? Totally Great video and content, good luck on figuring out the issues Bud!😉👍📹💯✔️👋👋👋😂🤣

Kev , the runnaway could be caused when the car is to far away from the trasmitter and the throttel servo is stuck on gas and it runs away, and if you get to your car then it connects again because its in range again it works. Second reason is a weak battery in tramsmitter or car. Nice vid kev, this engine rips, Have a nice day

@littorio97

Жыл бұрын

The radio fail safe is used in that case So the throttle servo should be closed whenever the receiver loose signal Probably a weak or discharged battery is the problem ( but the kill switch detect it and stop the engine )

@ramsay4804

Жыл бұрын

Control was 5' from the truck

@ryanclark9386

Жыл бұрын

​@@ramsay4804lol right

@amandev6

Жыл бұрын

The runaway was due to the engine rather than the electronic components. Cutting off the air to the engine would've done the trick.

Hey Kevin, I'm very curious about something. Why don't you ever shoot any videos at that "ARC" place I think it was called?? I could be mistaken on the name. It had all the green carpet stuff as the track? That place was pretty cool 😁👍

@KevinTalbotTV

Жыл бұрын

We’re going there soon

I’ve been watching for years

Yes!!! My buddies and I were just binge watching your videos last night. I got them hooked!!! Let’s get them Tumble Wumbles Mr. Talbot!!!

Sorry you had trouble Kev but thanks for another highly entertaining vid! Love watching your content brother!

"Today we're replacing the engine wiff a hydrogen reactor, see how fast it is and go for a bash... Yes!"

You make this look cool and fun mate. Great video.

Running it in bwa ha ha ha, more like fry it in. Nice car.

Kevin love your work mate.The content is unreal.Cheers from Australia 🇦🇺

I truly love seeing his content, but most of all I honestly love seeing his subscriber amount go up, love to see it, love to see him succeed

finally a new video for this rc car ohhh its chrismas every day

So cool wish i had one 👍👍👍

next put a car engine into it

How long till Kevin is saying “today we are putting this Chevy LS corvette motor in this Losi 5T!”

Putting wheels on an huge engine regardless of the scale is always fun 😂😂😂❤

Every time you do a video on a gas (petrol) RC and I think "finial maybe this gas RC will be reliable", you just keep proving why electric is better 😆

@Eddiee757

Жыл бұрын

There is no better or worse in rc

That thing is Bad to the bone! Hope you can wash it off now. I'd love to see that rig in more videos. I'd love to see Taylor RC make a chassis like that for the 5th scale Kraton! I'd buy one in a second!

Glad to see Kevin finally upgraded from stanley tools to milwaukee tools

I just happen to be working on my 5T when I got this notification. I feel like that makes me special. Like me and Kev are connected man. lol

The power of these cars is incredible…. If you tried to rip that tire that blew, by hand? (without heat or acetone) you’d need some CRAZY power

Morning Kevin

Those Losi 5T's are a eriously good truck. Good thing I can't afford one....and don't have the room now I think about it. An engine running on I thought was caused by carbon build up in the head. When the engine turns off for a little while the carbon stays hot enough to ignite any fuel, and the engine diesels as it is sometimes called. That was my experience anyway. It can happen other ways and I have no idea what would cause it in a small engine like that (outside of what the problem turned out to be anyway). Looking forward to more of this truck.

Dude so cool love your videos.

HI Kevin huge fan I love Rc cars and planes so much I do have the Losi Baja buggy and a sc10 RC truck my uncle got me in to this hobby I started when I was 5 I enjoy RC's so much

Go on Kev

I get that in this situation it wouldn't have helped, but if you have a runaway, why don't you just make the car go in circles until it flips over?

Just casually ripping the local football field up 🤣

She's a big beastie to not check failsafe and you a Heli pilot too 🤣.

Love this more on stuff like this

You need that Ariel upright or better yet I would replace the Spekky radio for a Futaba set up. When the 5ive was first released there was an issue with the ignition interfering with the radio signal for spektrum radios and receivers, they did eventually solve this however and it shouldn't be a problem now but I would still swap it out to be on the safe side. While runaways are funny when it comes to the size and weight of these trucks I wouldn't want to take any chances.

Check the carb or intake for leaks if it keeps running when you hit the killswitch... Metallic sound i think clutch orbdirt in the diff👽 Love your Builds !!!