Actually these machines are made in the Netherlands 🇳🇱. The bucket is too wide for those pens I guess. And if you enter your barn backwards, Ur able to get to that other corner much better. These wheelloaders beat any skid steer in means of comfort, and visibility. Skid steers are quite rare here in nl. Almost every farm has a kind of this wheel loader though

@rigdigwus

10 ай бұрын

the reach of the small one is the same as with a skid steer but it is way bigger, don't see how this would every be worth it. telescoping can be handy but the reach is still quite limited

@Ever443

10 ай бұрын

@@rigdigwusit’s just like anything, you have to have a combination of equipment to do any job, both Skidsteers and these units have their sweet spot so to say in what they do well

@xSCHEF

10 ай бұрын

Made right here in my small town of OISTERWIJK, the Netherlands! Edit: Kubota has recently struck a deal with them actually, Tobroco GIANT will build all these mini-loaders under the KUBOTA brand too!

@mramanya

10 ай бұрын

What did your dad think about them?

@hendricogoosen4599

10 ай бұрын

Heel interessant

I just bought a case 21f compact loader for my dairy a few months ago. It replaced 3 machines on the farm. Compact loaders are very versatile! 10 out of 10 would recommend.

I love these machines! Made and used almost everywhere in The Netherlands! I get what you said, I have been stuck to the wall myself couple of times, but when you get the hang of it, you’ll learn the machine better. Becareful with heavy loads, you could flip if you turn too fast

Impressive machines, Eric. I can see lots of positives, but when many of your feed and cleanup systems center around the maneuvering of a skid steer it’s hard to change.

I can see how over time, you would become very efficient. But the ideal situation would be to have both the skid steer and the articulated machine. The problem you mentioned, getting pinned against a wall, put your bucket down , raise your front tires off the ground and articulate away from the wall.

We also have one 1 the Netherlands the same as almost every farmer, skidsteers arent popular here but we love our giant loaders

These machines are popular here in Scandinavia like Skid steer are at your place. But they just keep getting bigger and bigger and works well if you have all new buildings. We have machines from Avant and Multione that are around 1 meter wide and 2 meters long and lift atleast 800 Kg

I predict he sticks with the skid steer

@harrybowman306

10 ай бұрын

I agree, unfortunately a lot of their buildings are built around the use of skid steers which obviously are more nimble and agile than other machines

It’s from my HOMETOWN OISTERWIJK NETHERLANDS amazing machines!!😊 Edit: Kubota has recently struck a deal with them actually, Tobroco GIANT will build all these mini-loaders under the KUBOTA brand too!

@JHruby

10 ай бұрын

Having dealer support through Kubota dealers would be a huge plus. European brands like JCB are often let down here in the US because of small dealer networks and lack of parts availability.

The demos are always so interesting!

We used a G3500 for a month on a project. Machine really is amazing. Good balance and traction. Also the big black ant on the boom.

Your positive attitude makes it all go well, and thats why you get chosen to demo them.

I fit the 2700 in my tool trailer. It lifts pallets of pavers. I leave the escavator and track loader at home for all hardscape jobs now

I've got a Schaffer mini wheel loader similar size as that giant 2700. id never go back to a skid steer now. on occasion I get myself into a corner and the articulation makes it difficult to get out but all around I love these mini size/class of machines.

Basically a skid loader is like a very big and agile man with a very big shovel. Wheel loaders have their place but they don’t suit every job. Ideally it would be nice to have both.

I love watching the cows flick the dumping feed off with their ears! So cute! ❤

For driving a new machine you did a great job. With time i am sure you would be zipping around as nimble as the skid steer. Your review was really informative and thorough. Thanks for a great video Eric.

I ran wheel loader for 10+ years. I work for Horst Excavating out of Lancaster. If you end up buying one I would love to give you some tips. You do really well for not running one! Don’t comment much but love you vids and I’m local.

what a sweet ride Eric. Looks like fun to be honest

If you ever get stuck against a wall you can set the bucket on the ground and push the front wheels off then shimmy it over it that makes sense. We have a 2 ton lift capacity terex which is a lot larger than the Giants but our feed passageways 10ft wide! So tight we needed a special order diet feeder wagon but thats the joys of Ireland 😅

Wow, that makes a nice addition to the whole fleet of equipment

We use skid loaders for mixing feed and burn through hard surface tires pretty quick...I like how high the wheel loader sits. Thanks for the video nice to see an application that relates to what we would use it for 👍

Enjoyed your observations. Thank You

I am a machine operator. Love your videos and take wide turns that will make it easier to get in tight places

When you get stuck you could put the bucket on the ground so youre front tires lift up and rotate the stering whee then

I watched a guy fix the pivot pin on one of these...definitely make sure that pin is greased...it was a nightmare to split that machine and fix if/when the bushings wear out due to lack of maintenance. So cool to see new equipment being tested/used...I hope you enjoy the machines...would definitely be a great addition to your dairy farm! Keep em coming!!!!

Yeah Eric if nothing else the savings on not replacing the skid steer tires so often is a big plus.

Excellent review and demo! Great to see Dad putting the machines through the evaluation process. Excellent hearing you talk about visibility and kids on the farm. Certainly, they are both impressive machines! Thanks for the video.

We have the older "top of the line" V761T (now called G5000) and I reallj like it. Use it for loading/unloading trucks "forklift duty" and utility work. Tried a new Kubota the same size but didn't like it as much. Strongest contender I've tried so far is a Kramer 8085 with four wheel (crab) steering...

been using skid steers for many years about our farm and it’s a machine u could never do without once u get one, but defo feel u need to have a bigger loader for feeder filling and some heavier jobs about the farm,having the two machines we find neither is over worked and have gotten many years from them both.i’d feel even the bigger of the two demos is still to small for your operation

Reminds of the jcb 407 I used to drive. Very handy bit of kit. Brilliant video 💪🏻 🏴󠁧󠁢󠁷󠁬󠁳󠁿

1 skid steer and 1 giant g3500 would be a good combo

I used to operate a slightly bigger kubota version of these. Your assessment of planning turns or getting trapped is spot on. Also didn’t like that the whole load could be thrown off if you turn too quickly or sharply. On the model I operated it was also possible to climb into a running machine and grab the steering wheel and subsequently slam your load into something. Skid loader is much better for your jobs.

Great demo!

Love what you do man definitely love where you are taking things love seeing it man and yeah skid loaders do have their perks that’s why it’s good to have one or two around but Blessing to you and the fam bro!!!!🙏🙏

If you get stuck onto the wall, push you're bucket down. Push the frontwheels up. And just steer youre way out.

Awesome video Eric and dad. I like the skid steer much better. It looks like you can do much more with it. Maybe a new one would have the features that you would like. Thank you guys

Thx for the review

We bought a compact wheel loader (john deere 324L) and it works great for mixing feed and moving big square bales but building work is difficult.

Just started binge watching ur channel again today😉. If you get a loader in a tight spot, against a wall or something, put the bucket down till ur front tires r barely off the ground and slightly turn away from the tight area. Should give you enough room to get away from said wall or whatever. Just a little tip👌 Always great videos Eric!

Those look like some pretty neat machines.

You did a great job of putting both of the two new machines through their paces. And as you pointed out the larger unit with more reach has better visibility for loading the feed mixer. And with the totally enclosed cab, you would certainly be cooler in the summer and warmer in the winter as the operator VS the skid steer. By keeping this unit out of the manure handling duties, it would reduce the risk of cross contamination to your feed storage areas. But after having said all of that positive. I do think you would dearly miss having your skid loader around to do all of the close work in your barns. I just do not think you can beat having a good little skid steer on a dairy farm for handling manure, and clean up in tight quarters. Not sure if some lower costs for wear and tear on your existing skid loader would be enough to offset the cost of the new Giant loader. But your point about the importance of safety for your family certainly has some added value that should be considered as well. This won’t be an easy decision for you and your family. But I also know that it comes down to the dollars. And they have to work out if it is going to be a good investment for your dairy farm. Thanks for a great demonstration video!

@user-de1nz8dt4z

10 ай бұрын

?,,,,

When you turn in the alley, raise the bucket higher than the gate. You'll be able to turn easier. Then back up straight, put your bucket down and scoop. Get out the same way.

Mighty fine ; wish we could get some rain down here in south Texas!! God Bless!!

I could see how those would be fine in most uses. There may be some issues with height in low ceiling barns and maneuverability due to length. I do like your Kubota, I would love to get my Bobcat fixed, just a lot of things to get done and a lot of cost. Good test run and comment on it, thanks. Have a great week!

Just watched video again the small one in calf barn is cool to see you can clean 1/2 the pen from one side then go in backwards and clean other side

Does the dealer offer the larger machine without the telescope. That usually extends the front of the machine around a foot. Also look at a high tip bucket that connects to the auxillary system. You lift the bucket straight up over where you dump and then activate the bucket and it tips over.

On my equipment, I wrapped the hyd hoses, at critical bends, and rubbing points, WITH OVERSIZED CLEAR, BRAIDED HOSE BY SLICING IT, THEN USE ZIP TIES TO SECURE IT. CHEAPER than to change hoses.

Good review!

Good you made this video. I gonna try a Giant soon too.

I usually work with front loaders but seeing these wheel loaders makes me want to get one

I have run both, loader is better for feeding and mixing; while the skid steer is better for small pen cleaning. In an ideal world you would use both machines. As you point out there is less wear and tear with the loader and they are much faster compared to skid steer when handling feed.

@jentpostma337

10 ай бұрын

That's what we ended up with. Add a loader keep the skid. Alot less hours on the skid, yet still have it for bedding, small pens and cleaning up feed.

Interesting. They would definitely have a use. Mixing feed and cleaning out the bigger sheds it would be great. Also lifting up seed bags where you need a bit of extra height. It seems to have great traction and visibility. In your dry cow farm I wonder would it fit in the low roof shed ? anyway looks like a nice piece of kit

Very nice loaders

Great video Eric. Just like SaskDutchKid, A dairy on the prairie, Laura Farms, Millennial Farmer and a lot of other channels you tell the real and honest story abour ag and farming. You should be rewarded with much more viewers.

neat little machines there. if you had a bunch of round or square bale work it would be handy also. Just need everything a bit wider if you were going to use one all the time. thanks for another great video.

The one skid steer that wood work well for you would be jcb teleskid

Ask for more time with them to evaluate. A few days even. One of these and one skid loader would be a good mix for the chores you have. Cheers 🇨🇦

@jamesmisener3006

10 ай бұрын

I forgot lifting seed bags over the seeder.

Great video...getting some moisture that's great!

I used to do landscaping and we ran kubota articulated machines. Loved everything about them except for the slow hydraulics.

I think the compact loaders will do well cleaning up manure

Nice demo Eric! I heard they're made in the Netherlands, so the quality will be great. Nice equipment with many uses like construction!

They just seem so wrong for barn clean out. But they look like they would be so good for so many other chores.

Sounds you need this as a second machine instead of a second bigger skid steer. Great video!

If you are stuck in a corner it helps to put the bucket down en push the front axel of the ground and turn the steering wheel.

Great video, skid steers better option for tight areas. You could cut out mesh sides on kubota and install clear polycarbonate sides for better visibility, this is an option on bobcat r series machines

Funny we my wife and I were just down your way for the Rough and Tumble. We were trying to find the the air B and B we were staying at and we drove right past your place. We were driving by and I saw the farm and your new house, for a min she didn't believe me. We ended up staying not 5 min from you r farm. Anyway really enjoy your videos. Thank you.

We have a Bobcat A300 and an A770..just traded the A770 in on a Bobcat TL519...awesome replacement machine. Do'nt know why we waited so long.Its great to have a 19' lift height.

Those both look like nice units and would probably be a welcome addition to any farm. Unfortunately though I don’t think anything else compares to the maneuverability of a skid steer. I guess that is why you see so many skid steer, pay loader combinations.

Great video and yes a bit of a learning curve. i operated Articulate Machines in the mid 1980'to mid 1990's. On Overseas Containers for the Railway. They would lift over 60,000 Pounds. They were great once you spent a few hours Operating them. but like many machines you have the good,bad and the ugly on them all.

Nice video Eric lots of info on loader's you could be a great salesman but I think the skid steer is better on your farm. The good thing about the loaders is they don't chew up tires. But the cost to replace the tires on the new machines would be a lot more, they are so much larger than the skid steer. But they are very nice machines Iam sure after a few days you would have it working like the skid steer just that learning curve.

Look into a JCB tella skid. Side door and telescoping boob built into a skid steer. I love them when I demo-ed but it is a bit out of my price range. Trying to find a good used one.

The biggest one can be used for stacking round bales and scooping out the big barns specially the dry cows pens

It says alot about the quality of your channel that equipment dealers are interested in letting you demo various pcs of equipment

Love your videos

A lot less money spent on tires with these units. First thought I had, compared to a skid steer

@dirkus3722

10 ай бұрын

Yep that was my first thought as well.

love the videos Eric your house is awesome

I think you gave a good review on the wheel loaders, especially the bigger one. I could see our Farm run something like that if we had the money for it :-/ The main problem I see is that your farm is build around skid steers, so everything is quite tight. For example your calf barn and probably the slatted floor in the milk cow barn. Thats just build for skid steers and there wouldnt be a good way without compromises to be satisfied with just a Wheel Loader. But nontheless I can very well see you guys trade one skid steer in to buy a wheel loader with 80-100hp for Jobs that just require that bit more power and reach (if it fits the wallet of course XD) Great video as always and keep up your excellent work greetings from germany!

Nice to see Dutch machinery in the states

Watching other channels loaders are often used in Europe, and never see skid steer units. Saw a unit where they had an agitator on a bucket for silage (or in the case of Europe grass). Cole the cornstar, they got a JCB skid loader and they liked it because you enter from the side. Their loader is track but I think it also has a wheeled version.

Cool! Might save on skid steer tires.

I work on a dairy farm in Wisconsin and we have both a skidsteer and we also use compact loaders to do the bigger stuff that takes longer with a skidsteer

Nice machines

Another Great Video 👍

Thank Eric for the video. For my 2 cents and that is all it is worth. I think the G3500 would be more useful the the smaller one. around the farm. I think that as a person uses them more you will learn more tricks to using them. Have a good day.

I think your best bet might be a JCB teliskid. It has the features that you like from both style machines

See if you can find a drop off bucket. If you like the smaller machine but don’t have the height to get into the spreader, that type of bucket would work great. It also works great for back dragging when the bucket is open.

Buy both of them.

New is always nice, I think if skid steer could come up with a telescopic bucket without extending the overall length too much but hey I drove trucks what do I know. But I did a haul milk when I drove trucks and I’m familiar with the fragrances

I can see how something like the larger of the two could be very helpful on a farm of your size.

Very nice machines. I don't know if you have a dealer close to you but you could have a look at Kramer compact wheel loaders. They tend to be a little shorter wheelbase than the Giants because they are 4 wheel steer instead of articulated. 😊

Thanks for the demo video today. That is cool machine. I am wondering if you could put a narrower bucket on either one of those when your have limited room for right angles. 😊

Should have a look at the avant loader can do the same and is smaller also has over 200 attachments and would be suitable for dairy farming work

The skid steer is the right machine for cleaning out the calf barn, hands down!!

I always thought they would be great picking up round bales in the field because of the speed.

That's what you need just for loading feed and used the skid steer for everything else.

We have the same G3500 we just use it side jobs because we load feed with nh t6 with front louder

YES SIR!! 🎉🎉

If you had wider pens then these would be great...but for your guys setup I feel the skid steer just does it better.

Sure looks like fun. Good review. Don't know if an illusion or not, but I think the wheel loaders have a higher centre of gravity that could potentially cause a tippy situation.