Works great for Joes or Cobra. I love it, thanks for watching.
Жүктеу.....
Пікірлер: 42
@humble1ne Жыл бұрын
Wow, you took a completely cartoon-looking Disney toy and turned it into an awesome Cobra custom. Love it!
@thepropcollector1
Жыл бұрын
Thanks bro!
@veekleek7535 Жыл бұрын
Looks great! The scale for g I Joe's work well enough for the price. Would love to see some battle scenes with this beast in it. This would be at least $70+ is hasbro would release something similar.
@thepropcollector1
Жыл бұрын
Yea bro too bad hasbro doesn't get on this, something kike this would fly of shelves. Thanks for watching 🤜🏻🤛🏻
@MattVirtualRuns12Ай бұрын
50 Cal. Barrel from the 60th anniversary trooper could go nicely on the front of that thing. They also mount well on Scrap Iron’s drones for second protection when the missile bays run dry
@thepropcollector1
Ай бұрын
I'll try it, I have a few troopers thanks bro 🤜🏻🤛🏻
@delfo_neto7313 Жыл бұрын
Nice! Fits perfectly!
@thepropcollector1
Жыл бұрын
Yea fits very well 🤜🏼🤛🏼
@Jamesviolaofficial Жыл бұрын
This was a really rad idea
@thepropcollector1
Жыл бұрын
Thanks 🤜🏻🤛🏻
@Riis1123 Жыл бұрын
Genius!!!
@thepropcollector1
Жыл бұрын
Thx bro!
@teslasuperdestinations Жыл бұрын
easy dope job! would love to see a whole "couch canyon" lined up with these for the GI Joe team to get through during a play/ stop motion vid!
@thepropcollector1
Жыл бұрын
Great idea. Bet it would look awesome thanks for stopping by 🤜🏻🤛🏻
@CutThroatComics Жыл бұрын
I like the color you wet with. if I was going do a paint job on the cannon. it would be a Nato Flat black color for sure or maybe a Crimson Guard colors.
@thepropcollector1
Жыл бұрын
Thanks bro 🤜🏻🤛🏻
@corneliussmithgijoe702 Жыл бұрын
That’s nice, like I said on my KZread channel , we have to build around GIJOE CLASSIFIED 👍🏿👍🏿
@thepropcollector1
Жыл бұрын
Cool bro Ill check out your channel
@lokiwartooth1138 Жыл бұрын
The paint ap on the rocks in the back look nice. But if you would have made a terrain paste and used it or used pva and toilet tissue they wouldn’t look quite so man made. After you make your stones glue them down the coat with the paste or tissue then let it dry. The effect is very nice. I hope this helps. Lovin the channel.
@thepropcollector1
Жыл бұрын
Thanks bro I appreciate it 🙏 🤜🏻🤛🏻
@lokiwartooth1138
Жыл бұрын
@@thepropcollector1 we are all a big nerdy team man. At least we should be!! Also you can get some plaster at hobby lobby or such to use mix it with sand and the tissue and pva this works very well too. Or you can order sculptamold which is very cool. But if your doing just a ground use that mixture and take out the tissue. I hope I helped. And instead of buying modpodge use pva glue then mix and use it where you would mod.
@thepropcollector1
Жыл бұрын
@@lokiwartooth1138 great ideas 💡 bro Im gona try to do a video talking about how I worked on this dio, still have aways to go. I have added water by using blue green and black spray paint on groceries bags. Im editing a video right now about a tent and kayak that I use for Classified Figures where you can see the water.
@raypaz2947
Жыл бұрын
I want to start. Total novice. Any tips from you both. Seems you both have more experience than I do
@thepropcollector1
Жыл бұрын
@@raypaz2947 I watched a few videos before starting, this is my first time doing a dio like this, its not that hard just take time. Go ahead and start its ok if you make mistakes. Its very cheap anyway I used styrofoam I had laying around all I bought was paint and past. Hope this helps..
@CutThroatComics Жыл бұрын
Good Idea for Gi Joe Classified figures
@thepropcollector1
Жыл бұрын
Glad I could help out thanks for stopping by bro
@CutThroatComics
Жыл бұрын
@@thepropcollector1 I have a idea for Cobra Custom idea I just found on amazon. Going to buy in January. I would love to show to you some time. It will work well with 6" inch Classified figures. Have a happy New Year,
@thepropcollector1
Жыл бұрын
@@CutThroatComics sure brother I would love to see it, thanks for the heads up happy new year to you too 🤜🏻🤛🏻
@davidmiller71424 ай бұрын
Hey, I'm trying my hand at a custom cobra firebat based on the lightyear xl14. I used rustolium plastic primer and it doesn't seem to dry fully. Any tips? Wrong paint? Finish and use clear matte coat? I think it's the same plastic as the xl15.
@thepropcollector1
4 ай бұрын
Try to sand it down a little, sometimes I use a fine grit sandpaper and sand down very gently the paint adheres better. I also use clear matte coat a lot of times. Thx for stopping by 👍🏻
@willwaggenspack64119 ай бұрын
Where you get the cobra decal
@thepropcollector1
9 ай бұрын
There watersides from ebay 👍🏻
@rickdavis32 Жыл бұрын
Couple of questions. First off awesome shit dude. This is kind of the type of thing Id expect to see on cobra island 100 m from the terrordome flanked by hiss tanks and vamps. And of course ashit ton of bats. This makes me want scrap iron,techno viper engineers and metal head also.! Anyways what would you do to work this into a diorama and is there any secondary you woukd add if you could or are going tp add? Ps outside of the hiss tank (not a custom)this is one of my favorite vehicles Ive seen. Thanks for showing this off!
@thepropcollector1
Жыл бұрын
Bro I am working on a hiss tank, and finishing a mech suit its the McFarlane avatar one. The whole figure fits inside the suit.
@thepropcollector1
Жыл бұрын
Thanks for stopping by I appreciate it
@rickdavis32
Жыл бұрын
@@thepropcollector1 Im probably getn a few of these ill try and put steps and running boards on them. But thanks for the cool stuff. Im just starting out printing,but hopefully by next year. Ill be able to make my own firures and playsets. Ps what are your wishlist figures! One last tip,for finer details since model paint can get gloppy. You can use spray paint on a brush it covers well and seldom looks doughey, clayish or overmodeled. Im a subscriber now!
@thepropcollector1
Жыл бұрын
@@rickdavis32 thanks for the tip bro and for the sub, I really wish the dreadnoks could be nex, good luck on the printing! 🤜🏻🤛🏻
@rickdavis32
Жыл бұрын
@@thepropcollector1 itll be awhile on the printing,I wanna make some larger objects so will hafta make sections but hafta improve my cad work first especially with pegs and fix points, youll wanna practice on glossed paper, magazinell do. You really have 3 to 5 mins at best. Thin strokes with a dry brush.Clean strokes in one direction the brush size should be slightly smaller than the part as far as tape i use masking tape but reversed. Best of luck to you, Iol go nuts and have fun! Ps love the dreadnoks I always added mercer to their team actually several of the marauders. But Im hoping for some sort of 3 pack on them! They always remind me of spinal tap!👍🎶
@PhysGraffiti7 ай бұрын
For 20bucks you can probably get 3 of these today
@thepropcollector1
7 ай бұрын
Ill be on the lookout 👀
@Nekro_216 Жыл бұрын
Just followed you on IG Brotha. Keep up the dope work!
@thepropcollector1
Жыл бұрын
Thanks bro I sent a request 2 u 🤜🏻🤛🏻 thanks for stopping by
Пікірлер: 42
Wow, you took a completely cartoon-looking Disney toy and turned it into an awesome Cobra custom. Love it!
@thepropcollector1
Жыл бұрын
Thanks bro!
Looks great! The scale for g I Joe's work well enough for the price. Would love to see some battle scenes with this beast in it. This would be at least $70+ is hasbro would release something similar.
@thepropcollector1
Жыл бұрын
Yea bro too bad hasbro doesn't get on this, something kike this would fly of shelves. Thanks for watching 🤜🏻🤛🏻
50 Cal. Barrel from the 60th anniversary trooper could go nicely on the front of that thing. They also mount well on Scrap Iron’s drones for second protection when the missile bays run dry
@thepropcollector1
Ай бұрын
I'll try it, I have a few troopers thanks bro 🤜🏻🤛🏻
Nice! Fits perfectly!
@thepropcollector1
Жыл бұрын
Yea fits very well 🤜🏼🤛🏼
This was a really rad idea
@thepropcollector1
Жыл бұрын
Thanks 🤜🏻🤛🏻
Genius!!!
@thepropcollector1
Жыл бұрын
Thx bro!
easy dope job! would love to see a whole "couch canyon" lined up with these for the GI Joe team to get through during a play/ stop motion vid!
@thepropcollector1
Жыл бұрын
Great idea. Bet it would look awesome thanks for stopping by 🤜🏻🤛🏻
I like the color you wet with. if I was going do a paint job on the cannon. it would be a Nato Flat black color for sure or maybe a Crimson Guard colors.
@thepropcollector1
Жыл бұрын
Thanks bro 🤜🏻🤛🏻
That’s nice, like I said on my KZread channel , we have to build around GIJOE CLASSIFIED 👍🏿👍🏿
@thepropcollector1
Жыл бұрын
Cool bro Ill check out your channel
The paint ap on the rocks in the back look nice. But if you would have made a terrain paste and used it or used pva and toilet tissue they wouldn’t look quite so man made. After you make your stones glue them down the coat with the paste or tissue then let it dry. The effect is very nice. I hope this helps. Lovin the channel.
@thepropcollector1
Жыл бұрын
Thanks bro I appreciate it 🙏 🤜🏻🤛🏻
@lokiwartooth1138
Жыл бұрын
@@thepropcollector1 we are all a big nerdy team man. At least we should be!! Also you can get some plaster at hobby lobby or such to use mix it with sand and the tissue and pva this works very well too. Or you can order sculptamold which is very cool. But if your doing just a ground use that mixture and take out the tissue. I hope I helped. And instead of buying modpodge use pva glue then mix and use it where you would mod.
@thepropcollector1
Жыл бұрын
@@lokiwartooth1138 great ideas 💡 bro Im gona try to do a video talking about how I worked on this dio, still have aways to go. I have added water by using blue green and black spray paint on groceries bags. Im editing a video right now about a tent and kayak that I use for Classified Figures where you can see the water.
@raypaz2947
Жыл бұрын
I want to start. Total novice. Any tips from you both. Seems you both have more experience than I do
@thepropcollector1
Жыл бұрын
@@raypaz2947 I watched a few videos before starting, this is my first time doing a dio like this, its not that hard just take time. Go ahead and start its ok if you make mistakes. Its very cheap anyway I used styrofoam I had laying around all I bought was paint and past. Hope this helps..
Good Idea for Gi Joe Classified figures
@thepropcollector1
Жыл бұрын
Glad I could help out thanks for stopping by bro
@CutThroatComics
Жыл бұрын
@@thepropcollector1 I have a idea for Cobra Custom idea I just found on amazon. Going to buy in January. I would love to show to you some time. It will work well with 6" inch Classified figures. Have a happy New Year,
@thepropcollector1
Жыл бұрын
@@CutThroatComics sure brother I would love to see it, thanks for the heads up happy new year to you too 🤜🏻🤛🏻
Hey, I'm trying my hand at a custom cobra firebat based on the lightyear xl14. I used rustolium plastic primer and it doesn't seem to dry fully. Any tips? Wrong paint? Finish and use clear matte coat? I think it's the same plastic as the xl15.
@thepropcollector1
4 ай бұрын
Try to sand it down a little, sometimes I use a fine grit sandpaper and sand down very gently the paint adheres better. I also use clear matte coat a lot of times. Thx for stopping by 👍🏻
Where you get the cobra decal
@thepropcollector1
9 ай бұрын
There watersides from ebay 👍🏻
Couple of questions. First off awesome shit dude. This is kind of the type of thing Id expect to see on cobra island 100 m from the terrordome flanked by hiss tanks and vamps. And of course ashit ton of bats. This makes me want scrap iron,techno viper engineers and metal head also.! Anyways what would you do to work this into a diorama and is there any secondary you woukd add if you could or are going tp add? Ps outside of the hiss tank (not a custom)this is one of my favorite vehicles Ive seen. Thanks for showing this off!
@thepropcollector1
Жыл бұрын
Bro I am working on a hiss tank, and finishing a mech suit its the McFarlane avatar one. The whole figure fits inside the suit.
@thepropcollector1
Жыл бұрын
Thanks for stopping by I appreciate it
@rickdavis32
Жыл бұрын
@@thepropcollector1 Im probably getn a few of these ill try and put steps and running boards on them. But thanks for the cool stuff. Im just starting out printing,but hopefully by next year. Ill be able to make my own firures and playsets. Ps what are your wishlist figures! One last tip,for finer details since model paint can get gloppy. You can use spray paint on a brush it covers well and seldom looks doughey, clayish or overmodeled. Im a subscriber now!
@thepropcollector1
Жыл бұрын
@@rickdavis32 thanks for the tip bro and for the sub, I really wish the dreadnoks could be nex, good luck on the printing! 🤜🏻🤛🏻
@rickdavis32
Жыл бұрын
@@thepropcollector1 itll be awhile on the printing,I wanna make some larger objects so will hafta make sections but hafta improve my cad work first especially with pegs and fix points, youll wanna practice on glossed paper, magazinell do. You really have 3 to 5 mins at best. Thin strokes with a dry brush.Clean strokes in one direction the brush size should be slightly smaller than the part as far as tape i use masking tape but reversed. Best of luck to you, Iol go nuts and have fun! Ps love the dreadnoks I always added mercer to their team actually several of the marauders. But Im hoping for some sort of 3 pack on them! They always remind me of spinal tap!👍🎶
For 20bucks you can probably get 3 of these today
@thepropcollector1
7 ай бұрын
Ill be on the lookout 👀
Just followed you on IG Brotha. Keep up the dope work!
@thepropcollector1
Жыл бұрын
Thanks bro I sent a request 2 u 🤜🏻🤛🏻 thanks for stopping by