BONUS episode: kzread.info/dash/bejne/ZKWXvLGjpcSogLQ.html

@JohnMagraw

12 күн бұрын

I think Chad should invest in a set of gear wrench's

@brucewitcpalek5120

12 күн бұрын

@@JohnMagraw maybe you should buy them for Chad !! You don’t know that’s not what his KZread channel is about !! It’s a channel to show people that without a fancy shop and fancy tools that anyone can build themselves a car without investing all the money !!!

@petermartin6975

12 күн бұрын

Why not take the carbs off first. If it fails they are the easiest part to break. He knows how tall to make it. I’m just saying.

@RalfordBenjamin-qc9fr

12 күн бұрын

​😢

@roymilton426

11 күн бұрын

.....One would have thought that his TV appearances would have earned him enough money to afford some cutting edge workshop machinery???.....​@@JohnMagraw

Let’s not all forget about Doug too , he is a great worker as well and does a lot of the jobs that some would never want to do … Good on ya Doug and the rest of yall ✌️😎👍

@daddysails8926

11 күн бұрын

hes a great all around guy, and part of doing what gets done. and jovial

That ancient torque tube drive shaft is not going to work, and assuming that's the original rear differential, that will never hold up to a blown 460, so you will need a 9 inch Ford Rear.

@GeraldBoone-qy2yt

12 күн бұрын

That’s old closed driveshaft would be gone with one tap of the throttle. Lol

@michaelwalsh98

12 күн бұрын

One bip of the throttle and gone 😂😂

@user-di7in2zx1c

12 күн бұрын

@@michaelwalsh98 I agree the drive shaft in the 1940 Ford Coupe needs to be upgraded and I'm not sure what 'the gear ratio is in the rear end is and whether it's been already upgraded to handle the 525 HP Enine with 650 ft lbs. of torque. Nate is a professional mechanic and he would know what the old Coupe willneed to handle the additional power and rorque.

@dogsense3773

12 күн бұрын

Car will never be driven

@randy9573

12 күн бұрын

Dosent mater. He never drives anything he builds except that god awful. Green goblin.

That motor will never get in there without Nathan. Give him his props!

@dinga11128

12 күн бұрын

You're right, they need to change the name of the channel to Bad Nathan.

@brucewitcpalek5120

12 күн бұрын

I see the haters are out !!!!!!

@JeanFrenchinGambia

12 күн бұрын

Are you serious 🤭🤭is the hen doing an egg or the egg doing a hen ...yes Nath is very good but....😉👏👌👍Bad Chad!!! is the master with only two hands and a master team🎩🧢🧢🎥🐕👋😉

@dkennylee

12 күн бұрын

Oh bs stick to your model cars

@jamesgould7583

12 күн бұрын

@@dkennylee40years in body and paint work and you for sure don't know shizz what's going on.

With the people showing up it feels like Fridays at my shop lol. I own B S Rods N Roadsters in Ohio and build cars also, im 70 years old and have been in business for 53 years. I like watching your stuff with Nate and Doug helping great team and great builds keep up the great work

Why not take the super charger off its only a coupe of bolts?

@user-wf6es1gx8j

12 күн бұрын

why

@superpela1

12 күн бұрын

He wants to get as close as he can to the model he has

@furiouswolf777voodoo4

12 күн бұрын

Easy to install without charger...I was thinking the same thing

@larszenthio1012

12 күн бұрын

Exactly what I thought too. The motor is easier to lift if the blower is removed. Just turn it back on when it's time to start up the big monster engine.

@ruffnut1000

12 күн бұрын

@@superpela1he means take it off and put it back on once it’s in

Hi Chad, Jolene and Nate, What a wonderful video today of preparing the 460 Cubic Inch Super Charged Engine and for installation in the 1940 Ford Blue Hot Wheels Replica ( One of Chad's Dream Cars ) Super Nate rigging up the engine lifter and making it balance and bolting up the Automatic Transmission. Then Chad working on the firewall area to facilitate the engine to go as far back in the body to match the replica of the car. It's a of experience and ingenuity to make everything work properly. Jolene the filming of this episode was terrific especially with all the great visitors dropped by to the shop for a tour and chat with Chad and Nate. The vehicle collection is forever growing in size with amazing artistic creations.

Chad, it really says a lot about you to take the time out of your day to take someone on a tour of your collection. I really appreciate the fact that you truly are down to earth. I believe that is why people are attracted to you. Thank you. Thanks for the video Jolene.

NATHAN FAN CLUB HERE 😇

@kevinhornberger4351

12 күн бұрын

Chad needs to let him loose on that bugatti hauler

@ayc5810

12 күн бұрын

I agree.👍

@choplogic8724

12 күн бұрын

Nathan on the Bolts, Chad on the Volts 💪💪😎😎

@user-rd9ql5qc5g

12 күн бұрын

Good guy

@thomassciurba5323

11 күн бұрын

Nathan is a doer not a talker. He lets his work speak for itself. Fortunately Chad yacks enough for both of them.

I think this motor will tear the crap out of the frame 😮

@jazzking99

12 күн бұрын

It will make a metal pretzel.

Motor is goin to look good in there...not sure bout cutting into the firewall...but it'll look radical...not sure what rear your goin to be running for the horsepower...but im sure it'll be all sorted and it'll be bad....Nate is a great addition...alot of knowledge and skill...got alot of company there today for sure...its FRIDAY...cya tomorrow

After a little of my own introspection perhaps we need to just watch, enjoy and cut Chad a bit of slack. I greatly admire what he does, has accomplished and the show that they put on. He is quirky and goofy at times which is also cool and works harder than most in here. I find him curteous, polite and accomodating and and the work he has accomplished is very admirable....now if you could all rise up from behind your keyboards and help Chad change the frigging lightbulb lol. ps. the caps, spelling and grammar in here is a face palm!

Bigger rear end, new driveshaft I hope. Looks great!

Respect and love gains you tons of good karma. Thanks for taking the time!

You may not want to move that motor all the way back where you think you want to just extend the scoop so it’s scoop sits where you want it

Hey Chad, Jolene, & Nate, it was a day of visitors today! Chad I can't wait to see how the engine is going to look in there! Better yet will be hearing it on the day that it fires up! Nate will get it mounted in there and fired up when the time comes this is just a test fit to figure out where the mounts will go and what all has to be cut out or repositioned! Jolene great work as always you are the video Queen and producer!

Today there is a bit of coming and going of visitors and friends. The beauty of this channel is that you can also see the everyday life of real life. 😎👍 If I'm not mistaken, Canada being bilingual, you should also know some French. But I suppose about the same as us in Italian-speaking Switzerland who also teach us a little German and French at school, but then we always speak Italian (and the others continue to speak French or German depending on the geographical area)

Thank you NATHAN. I appreciate your work. 👍

Yay! BBF 👍 Go for it Team Hiltz 👁🐅👌

What about the flywheel ? I always made sure everything was right so when I put the engine and gearbox together I didn't have to pull it apart again.

It's great to see you guys again! Make sure you're happy with it, Chad!

Bad Chad, Wow, this made my day brighter! Thank you!

Nice of Chad to show Mr Chenard his Art, His Joy was Heart felt Artist to Artist ☮️

Seen those tall engines twist a bit which would mean wider opening than youd think when cutting opening ... watched drags as a kid

Got this car coming along. Thanks for sharing with us.

Grteat day in the shop with Nate and lots of friends dropping by...that is a great day.

You made the right choice on the engine for your car Chad and Jolene and the right person to help you with it👍👍

That woman is the old man's Care GIVER!!!!!!! WOW

@jazzking99

12 күн бұрын

Yes, not too shabby at all!

get the bugatti done !!

I’m in with the Nate fan club…lol the two of you make a great team, and Doug and of course the brains of the outfit Queen Jolene! Great job to you all!👍😊

Nate: THINK, THINK, THINK Chad: LETS GO!

Well done Nate, hope it runs as good as it looks....Nice filming Jolene...

CHAD you couldn't have a better man helping you in your Daley work endeavor ! You two work so well together, WHAT A TEAM . It makes my day to watch you guys GET ER DONE !

chad needs to let nate determine how to set the engine in and stop trying to micro manage every little detail

Nathan is the engineering master. Who are these people who interrupt them when they can see their super busy? I couldn't do it, I'd feel so awkward.

@MrBmxbrawler

11 күн бұрын

Super busy? It's all part of the show. Like Chad said. You just need to be yourself. This is their life. simply friends stopping by.

The old man just visiting just wants to chit chat and Chad is trying to gets things done. Why not task him to come back later in the day when filming is over?

And ps the sign on the door idea hmm 🤔 it’s a thought, but your shop your show and maybe you like the interruptions we like watching you and the crew one way or the other, but does seem like a big day of interruptions! Thanks for what you do! 🙏😊👍

Usually you would remove the blower to make it an easier install

Awesome, Thanks

Yeah, because we know what happens when Chad tries to drive the tractor 😂

By Appointment only. Such good banter with the fellas. This would be a cool workshop! Never a dull moment ❤❤

Great Episode!!!

Mat is the man when it comes to figuring things out! 👍🇨🇦

@MrBmxbrawler

11 күн бұрын

Who the f*** is Matt?

GOOD JOB!

I feel like I owe you an apology Chad for a comment I made when you started mounting the hinges to make the suicide door mod. From all the work and mods I have seen you do, I should have known you would make those hinges work. I missed the episode where you got them working so I will have to search for it to see how you did it. Great work by you and Jolene as always

Good 50 cent tour with the first visiter and god. Bless Kevin and let see a picture of the rear end Maybe some buddy can’t recognize it Chad and Nate Good video Jolene

Great work, mate.

Exciting time test fitting the engine

I think better taking off the tunnel ram off for the less weight to put the hoist up to the car or the transmission also?

It going to be a beast for sure, love it ❤

Nate, in regards to the chains one forward and one back. Been there done that.

Hell yea big block , cool build

Hey from NFLD, great job boys , that’s the way it rolls in the shop!

Open house !! Very cool ... lotsa visitors today! Sign of a real garage

I know some don’t and maby even Chad don’t but I love when people stop in it’s just as good as when they go to other peoples places

One of the worse motors to put a blower on. 10 bolt head pattern blows gaskets easy. O ringed heads and cust gaskets help

@Robert-il4pi

12 күн бұрын

Don’t worry it will never drive!

Right on bad Chad awesome creations you have built love it all mousemanwoodriver Illinois usa

❤good show(like the longer shows❤

Chad is excited about getting that engine installed he’s has the right man dere Nate he’ll get it figured out

All that torque tube that's right up there underneath the floorboard all that shit needs to come out anyway cuz it ain't going to hook to the back of that transmission you're going to have to have a regular drive shaft that hooks to the back of that transmission that goes back to the rear end you may y'all may even have to change your ends but that torque tube set up that old 40s or 50 ml to set up is not going to hook up to that automatic transmission that you've got sitting there in the floor unless you buy some sort of adapter I've done too many of these conversions

blower belt should start halve inch loose cold it will tighten up. also anchor belt adjuster

My Friend had a 1940 ford he put a power vent motor from a Cadillac to operate that Cowel vent worked great that was in 1978.

Just curious if anyone saw the engine running?

Turn the lifts length wise amd build a spreader from right to left so you can adjust front tobwck

The adjustable lift should go front to back not side to side...

I would like to suggest that you consider a blower containment bag, if the blower fails the rotors come out the back into your face,

Hi and Gday from sunny Queensland , top vid this one , thank you , cheers

wondering why your leaving the blower on and intake? You guys do good, but?

@grantscrimgeour1848

12 күн бұрын

Thinking the same. The way they are going about it seems to be too much of a risk - no wonder the comment about having "been known to drop a few engines" in the past. Use some common sense fellas....

@user-kx6xp3nn9l

12 күн бұрын

@@grantscrimgeour1848 I guess i will watch and see. But never seen a blower and intake installed like this. Seems it wouldn't be good to smash this or have it flip top heavy to the ground, just saying.

@johncarlola

12 күн бұрын

they just want it in place to see how it fits. they'll leave it on the hoist and mark for mounts. you want to see how that blower looks popping through the hood.

@user-kx6xp3nn9l

12 күн бұрын

@@johncarlola A 871 blower and all the belt hubs are a lot of money. you can put the motor in and set it on without bolting up . i would even before firing this up look at the bottom on the blower before starting. but hey that's just me. Chad and nate will get it done

Needs to have the body off, install complete modern front end with disc brakes, replacement rear suspension with suitable diff etc, strengthen chassis. Concentrating on installing a big powerful engine at this point? Why? But this show is not actually about fitting out any car for the road. It is a show that repeats the storyline of creating vehicles for the road but cannot deliver because the mods are not certifiable for a start.

@thomassciurba5323

12 күн бұрын

In certain ways the show is a disservice because the last 20% of any car build is 80% of the work. That is why the Buggatti is taking forever and paint on the shoebox ford took forever (even to do a bare bones job). But that fact does not really come across in the videos, it would not make for good videos and is not conducive to producing daily content. So mostly the channel is about metal fabrication, getting the cars to be more than lot drivers isn’t really a thing.

@user-np2ww7uk5i

12 күн бұрын

@@thomassciurba5323 yes I wouldn't mind so much if they just said look none of this is for the road. The failure is in the pretending. Eg the buggatti hauler. A lot of skills in many ways but it is not going to ever be certified and in practical terms it is a nightmare. Consider being in an accident. No frontal protection. How do you even get out of the thing? As I say I wouldn't mind if it was stated hey this is just for fun. An art class. But instead it's this is going to hit the road and we are waiting on parts for this car so we are going to start another project! Come on! But say these things and you get this navel gazing at the start of the next vid or half way through and comments like "this is for all you haters out there!"

Chad's the builder and Nathan is definitely the mechanical guy.

Nathan and Doug are stealing the show 😱

I so wanted to help Nate with the spreader bar , use 1 like intended but with a bar on each end then 4 chains on end of bars 👍

thanks man

It’s Friiiday !!

Nathan is definitely a grinder. So glad to see him working with Chad. 😊

WOW GLAD NATE IS HERE WHERE IS LAZY DOUG LOL ENGINE LOOK AWESOME CANNT WAIT TO SEE HE PUT IN HOPE ON TOMORROW OR SUNDAY

Another great show.Your Friend

You got a lock on that front door???

Good job so far.

Cool back rims, sweet looking

Cowl vents feel pretty good to cool the firewall when Big Engines are installed...Its that or A/C...

Moving or motoring along Nathan and Chad wrenching on the engine for the dream toy car . Hopefully no issues but it's early yet so stay tuned to see what sort of hilarity that they come up with ! Thumbs-up Jolene ❤ always !

About helping each other.. Not Brang,,,, Brought....

It would be a good ideal to put a flat bar under the front edges of the fender part thst stays ok n the car thst way it would hold the renders when the hood is closed.

You might not want to push it back that far just to be true to the matchbox. They didn't have to worry about the foot room or driving position.

That motor needs a Hilborn style scoop/cleaner on it...

Consider polishing all of that aluminum on that blower and intake. She will shine.

Uggg..I would love to watch the guys work without interruptions... wow..I mean Chad goes on air at the same time everyday..and I'm sure these people no it...kind of disrespectful... shows yah Chad has a heart or a long fuse...lol .looking good guys what we seen get done anyway..cuts into the hour definitely..rrrrrr..I want to see car building not talking to fans ..just saying..I'm just loveing this build..its a bad ass car...

I HOPE IT FITS

I like the when you have visitors and show your collection

Hello Chad and Yolene !! Good work Nathan ...

Looks like going be hell of engine

Chad needs to to shit up and let Nate figure it out instead of asking so many dammed useless questions . Nate’s doing all the figuring lol . Just relax and let Nate take the lead . Share the limelight will ya !

@PerronRoger

12 күн бұрын

Do you not know who owns the shop and who pays the bill?????

@frankmarraro6632

12 күн бұрын

@@PerronRoger what does that mean? Nate has more knowledge about fabricating an engine work and mechanical then Chad will ever have. Chad is good at building the sheet metal on the leave the rest up to Nate.

@samsungcrossland2036

12 күн бұрын

Im sure its bad chad KZread channel your watching not nate 🤔​@frankmarraro6632

@GregoryBamber

12 күн бұрын

You never learn anything if you don't ask questions Mr Know-it-all.

@John-kl3ue

12 күн бұрын

Why watch ? Oh that’s right I have to complain again about something anything as long as I can complain..!

Nathan is a pretty damn good mechanic and I bet he's learning stuff like body work from chad

Chad, I know your trying to do a perfect match and I’ve been liven what you all have been doing but before ya cut measure, f I’m your wishbone to see how far you can actually set the trans, you may be able to set the motor back as far as you want, I’m thinking your going to come up against the frame, you’ve got a really cool car going live the up up Nate did but if ya have to not go back as far as you’d like it’s still going to be super cool and frankly way easier!

How long will you just look at the engine sitting the car before it’s finished

Nathan is the best thing for this channel

How come you never use a ratchet? Looks like it would be sooo much faster and easier most of the time.

Nathan. Make a mockup (engine) out of square stock.

Will the lift raise high enough