Getting Started With Fusion 360 - Pipe Tutorial
Ғылым және технология
Learning Fusion 360? Need to learn how to build curved shapes like this pipe example? This tutorial will show you how.
🎥Watch Next
Brand New User Series With Exercises bit.ly/brandnewuser
Quick Tips Series bit.ly/FusionQuickTips
23 Tips Beginners Should Learn bit.ly/Fusion23Tips
⚡Subscribe To Get The Latest Videos
bit.ly/SubscribeTechEspressoNow
💪🏼Support Me On Patreon
/ techandespresso
___________________________________________________________________
#Fusion360
#Fusion 360 Tutorial
___________________________________________________________________
DISCLAIMER
This video and description may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this.
Пікірлер: 21
What designs do you struggle with?
@javieruriel
2 жыл бұрын
with delta wings on planes.
At last a tutorial delivered at a sesnsible pace that people can follow. THANK YOU.
thank you !
Sure, it's easy when YOU do it! Thanks.
@TylerBeckofTECHESPRESSO
2 жыл бұрын
:)
Thanks. Again a nice short tutorial that's loaded with tips. I would go for a similar approach, but not doing the inner circle. Sweep the solid body and then use the Shell command to hollow the tube. As always with Fusion 360, many way to skin a cat.
@TylerBeckofTECHESPRESSO
2 жыл бұрын
Totally agree!
Another option would be to make a midplane between the two faces and mirror the flange to the other end using that plane. Only really useful if both arms are the same length though I suppose! Plus your method allows for teaching dimension copying! 😊 Thanks for all your videos! It was great to get me started!
@TylerBeckofTECHESPRESSO
2 жыл бұрын
:)
A great tutorial stacked with tips, thanks!
@TylerBeckofTECHESPRESSO
2 жыл бұрын
Awesome!
thanks for share u forgot make the chamfer command on the top of the 2 Circuit slot said Thanks again that was helpful .
@TylerBeckofTECHESPRESSO
2 жыл бұрын
Good catch!
Sweet thanks. That helps a lot
@TylerBeckofTECHESPRESSO
2 жыл бұрын
Welcome!
what a great tutorial - many thanks
@TylerBeckofTECHESPRESSO
2 жыл бұрын
Glad it helped !
Love your videos . I struggle with lofting from one plane to another , top plane to a side plane using guide rails . The struggle is real 😱
@TylerBeckofTECHESPRESSO
2 жыл бұрын
Glad you like them! That sounds like a great idea for a video!
What EXTREMELY BAD! Do don't tell WHAT YOU ARE DOING AND HOW!!