Fusion 360 Joints and Assemblies - 12 Tips For Beginners (Joints)
Ғылым және технология
Learn Joints and Assemblies in Fusion 360. 12 tips you need to know! Check out this Fusion 360 tutorial.
*Thanks to Dell for supporting this channel! bit.ly/Dell_TylerBeck
I use Fusion 360 for design, 3d printing, SolidWorks and for the Adobe Suite to make these KZread videos. I love having a machine with a capable processor, RAM and graphics card. Dell has been my go to PC for many years now.
Check out my 🚀Fusion 360 Jumpstart Course at bit.ly/Fusion360Jumpstart
🎥Watch Next
Brand New User Series With Exercises bit.ly/brandnewuser
Quick Tips Series bit.ly/FusionQuickTips
23 Tips Beginners Should Learn bit.ly/Fusion23Tips
⚡Subscribe To Get The Latest Videos
bit.ly/SubscribeTechEspressoNow
💪🏼Support Me On Patreon
/ techandespresso
Content Writeup
___________________________________________________________________
#Fusion360
#Fusion 360 Tutorial
#Dellinsidecircle
___________________________________________________________________
DISCLAIMER
This video and description may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this.
Пікірлер: 35
Fusion 360 Joints - Confusing or Easy? Vote down below...
@AutoMotivatedTV
2 жыл бұрын
Maybe you can help me - I have a front suspension - the a arms have joints at the frame and at the wheel spindle - 4 joints all rotational - I keep getting a joint conflict when I try to assemble the last joint - I expect the 3 joints to move to allow the last joint to be assembled but it hasn't worked the ways I've tried it
@bangel2310
2 жыл бұрын
What about that last joint ?
@brianwgDK
2 жыл бұрын
how do you get the handle to rotate and the pin slide. all my parts lock up. can´t get everything to move together, all move correctly by them self, but cant move when all are connected 😥😥🤬🤬
@TylerBeckofTECHESPRESSO
2 жыл бұрын
@@brianwgDK Feel free to share your Fusion 360 model with me. Tyler@techandespresso.com
@ttp_007
Жыл бұрын
Tyler, your video explanation is the best! There are some tutorials that are waaaaay too long or too boring, covering too many features into a single video, instead, break them apart into short videos. Seriously, I watched many other F360 tutorials, and none of them goes straight to the point, covering so many features within 8 minutes, yay! Keep doing the good work, you got the talent to teach! Subscribed!
Tyler, your video explanation is the best! There are some tutorials that are waaaaay too long or too boring, covering too many features into a single video, instead, break them apart into short videos. Seriously, I watched many other F360 tutorials, and none of them goes straight to the point, covering so many features within 8 minutes, yay! Keep doing the good work, you got the talent to teach! Subscribed!
EXCELLENT tutorial! Just what I needed!
Great example with everything well explained! Thanks!
@TylerBeckofTECHESPRESSO
2 жыл бұрын
Thank you :)
This has bien a great help... Thanks a lot
excellent comparison Tyler. working in both F360 and F360. the DOF jointing in F360 makes perf sense.
Perfect, thanks!
Really well explained, thank you!!
@TylerBeckofTECHESPRESSO
2 жыл бұрын
Appreciate that Nathan!
Very good video...I have a question...at 1:33..when you hit say animation of the joint...the moving object goes counter closewise...If I want the animation to go clockwise...what I should do ? Thanks
Useful video. Thank you
@TylerBeckofTECHESPRESSO
2 жыл бұрын
Glad it was helpful!
Nice vid thx
I did a little bit of moving parts but not enough to be a pro. That was a great lesson.
@TylerBeckofTECHESPRESSO
2 жыл бұрын
Glad to hear it!
Love it. I keep forgetting to use the Ctl key to get access to the inside. Thank you!
@TylerBeckofTECHESPRESSO
2 жыл бұрын
Welcome!
Nice explanation. Would it be better to use Joint Limits or contact sets?
@TylerBeckofTECHESPRESSO
2 жыл бұрын
I think joint limits are simpler to solve for Fusion. Contact sets typically require more computation.
Hello I have a fusion360 question, I have some panels drawn out in AutoCAD and once I move them to fusion the panel size changes… what am I doing wrong??
I made the joint, but how you move it ?
Great video on F360 joints.... I have designed in SolidWorks since 1998 and Fusion360 since 2017 (just under 6 years). I despise the joints concept compared to mates in SolidWorks. It is simply awful. Maybe someday F360 will offer something similar to SolidWorks mates. After 5+ years fiddling with joints.....Autodesk is still telling me: "you just have to get used to it, it's different". I laugh at them. Joints are terrible. Slow. Clumsy.
how do you use the mouse to move the joints, mine always wants to select something..
@kingofcastlechaos
Жыл бұрын
use PAN instead of SELECT
Please how can you move with one component? Every time I want to move a component, it changes the position of the whole assembly. Thx
@chadcoady9025
2 жыл бұрын
You need to ground one of your components. Right click the component in the list and select Ground.
1:40 what you just did here in 2 seconds (a bit too fast for 8 minute joining video) is what im trying to do in the past 10 minutes and it wont do it, it doesnt join it and the ok button is greyed out, fk f360 so sht, so much easier in sw...
@biancasava
10 ай бұрын
skill issue😔