Oh, and thanks for putting out the effort, thanks.

@FixedUntilBroken

2 жыл бұрын

No worries! thanks for watching

If your OSID doesn't have a an XDF. Save a back up and flash a different OSID on it that is supported.

@waynebayer3144

3 жыл бұрын

tryed on three different ones

@FixedUntilBroken

3 жыл бұрын

@@waynebayer3144 ok did you take pcm hammer. If not and you don't want to try than reach out the ls droid group instead

If I purchase all this will I be able to adjust abuse mode I'm having a loss of rpms dropping after 2k rpms while holding my pedal to the floor .i've had my vats rear 02s, speed limiter egr and Transmission sensors disabled looking for options before I send my ecm/p59 back out to get checked

Can you do a afm delete with this?

Can i use my Samsung tablet and an OTG cable to hook up to ALDL cable? Tunerpro RT only as i have it on my laptop? Any reply appreciated cheers from Australia ❤

Talking about with the PS 160 plus can you help me?

so if I am taking a PCM from a junkyard 5.3 to put into my 4.8 do I need to worry about the XDF, or just change the VIN?

@FixedUntilBroken

3 жыл бұрын

DXF isn't what you need to worry about but you do need a 5.3 bin. the VE tables and a other things are going to be different.

i bought a obdlink mx+ and it connects but wont read pcm ,theres a question mark beside read pcm, what could be the problem. made bench hookup

@FixedUntilBroken

3 жыл бұрын

LS droid has been having issues with obd links lately try pcm hammer. if PCM hammer works than you know ls droid was the issue.

What do I need to setup a test workbench? I’ve got a stock body harness and ecu I want to delete vats on, do I just need to give the ecu 12 volts and read the file to my phone?

@FixedUntilBroken

4 жыл бұрын

You don't have to you can do it all in the truck/car. If you want to do it on the bench I did a video on making a bench harness.

@WolffyHD

4 жыл бұрын

Fixed Until Broken I see, my motor is completely torn down for a rebuild, so I should be able to just supply the ecu 12v and a ground, and ignore the other wires, shouldn’t I?

@FixedUntilBroken

4 жыл бұрын

yes that should work I don't see why it wouldn't other than you will also have to to give power to the obd2 port to power the dongle unless its a shared 12+ I don't have the diagram pulled up.

Have you ever had the problem where the maps come out all jumbled? I don't have the rev range on the one scale and the increments on the other. Do you know why this could be?

@FixedUntilBroken

2 жыл бұрын

Normally that's just miss matched xdf to bin

@gemininyte279

2 жыл бұрын

@@FixedUntilBroken could you help me to fix that?

@FixedUntilBroken

2 жыл бұрын

@@gemininyte279 I'd recommend trying gearhead efi forum. Your going need to download the right xdf and I don't have all of them to email

@gemininyte279

2 жыл бұрын

@@FixedUntilBroken Thanks, I meant how to get the .bin file and the .xdf file to work properly. I have the files in need. It's for a motorbike

So will tunerpro work for things like a 5.7 vortec ECU? Or does it have to be LS engine related if that makes sense 😂

@FixedUntilBroken

3 жыл бұрын

It will work for anything you can find a dxf for. I know you can do the old OBD1 5.7 stuff like a TBI but those spider injected "vortec" systems are a pia to maintain. I've never seen a way to tune those but I have also never looked for a way to tune them because everyone just LS swaps that out lol

@lt.schlechtnacht9414

3 жыл бұрын

So what I'm doing is I'm turning my Long block 350 into a vortec engine. I bought the wiring harness and the intake manifold as well as the heads. I'm not necessarily trying to tune the engine I'm trying to see if I can disable things like the transmission control or the EGR. Because I'm not sure the engine will run on a stand with that stuff not connecting to the harness

@lt.schlechtnacht9414

3 жыл бұрын

I know that sounds ridiculous and lost of people have told me to just buy a kit but I'm not interested in spending 2000$ on a kit that I can't tune or control if that makes sense lol

@overbuiltautomotive1299

2 жыл бұрын

@@lt.schlechtnacht9414 microsquirt is what i have usa made n failry cheap options are wide open unlike big box stuff .or a SPEEDUINO ecu uis good and cheap like they should be .on can use a tablet as a dash with megasquirt to i think speeduino to same tuning software anyhow

Awesome info man. I decided to do a carb ls instead on my dodge truck, but my next project will be efi, check me out if you get a chance

@FixedUntilBroken

4 жыл бұрын

Will do. You gotta try EFI once you learn you will never turn back. Tons of options too megasquirt if you want to go full DIY Holly kits if you want something that just works or tuning stock stuff if you want in-between. Even HP tuners if a fair price it's about the same price as a high end carb.

Hey I'm trying to set up my tunerpro. Its a fresh install what all I need to download to it? I have a stock 411 pcm

@FixedUntilBroken

4 жыл бұрын

You mean your bin off the PCM? The easy way lsdroid or PCMHammer.

@dnap1011

4 жыл бұрын

I'm a lil confused on this

@FixedUntilBroken

4 жыл бұрын

@@dnap1011 it's better to keep it public so if other people have the same issue they can read over this. What's the confusion. I do have another video where I go and dump the bin, edit it and flash it. kzread.info/dash/bejne/l3mjrbB9hNS5mMo.html

@dnap1011

4 жыл бұрын

So do I need the OS ending in 0411 like my PCM says or i can use any OS

@dnap1011

4 жыл бұрын

@@FixedUntilBroken OK let me check this video

I registered for pcm hacking a month ago and still haven't been accepted

Link to his dongle please?

@FixedUntilBroken

3 жыл бұрын

New ones of the obdlink (the one I am using) is glitchy with current versions of lsdroid. If you plan on using lsdroid I recommend getting the tool that pete made(the guy who makes lsdroid). If you want to use pcmhammer instead go for the obdlink

Anyone else having a problem downloading LS Droid for Windows? Can anyone post it here?

Downside to tunerpro as there is no real easy way to datalog with it. With a P01 / P59 is to turn on/off things like VATS fans etc

@FixedUntilBroken

4 жыл бұрын

Most people data log with torque and a wideband. I personally don't do street tunes or Dyno tunes I use it for setting the vin or vats when someone needs a new pcm you can do a lot of other things like e fans, speed governor, transmission shift pressure so on. If you want to find another way to data log you can do trims and such just not my wheelhouse

@DanMcD80

4 жыл бұрын

@@FixedUntilBroken agreed. Also good for speedo corrections for tire size and rear end gear ratio changes, turning off MIL light for certain codes. Having tried tunerpro myself not that long ago something I had to figure out on my own on the datalogging so figured I'd share with the others that are newer than me.

@FixedUntilBroken

4 жыл бұрын

@@DanMcD80 agreed. What did you end up using for datalogs? Torque and stand alone wideband is what I have been seeing people do .

@DanMcD80

4 жыл бұрын

@@FixedUntilBroken not knowing you could connect a wideband to torque (till just now) I bit the bullet and bought HPTuners lol

@FixedUntilBroken

4 жыл бұрын

I guess you could add one to torque but I meant doing them separately but at the same time. Like one of the stand alone wideband with datalog and torque running at the same time

Is PS160 still PS160? I want to buy his dongle since he put in the work to f' the money grabbers, and thank him properly, but, I cant find his info.

@FixedUntilBroken

2 жыл бұрын

To buy one of his tools go to obdxpro, that's his business.

@mistersniffer6838

2 жыл бұрын

@@FixedUntilBroken - I thought thats what it was, but, i did not want to buy until I was sure it was his. I did not want to give some other schmuck money that should go to him. Cool, thanks

this shit does not work, ive torn my hair out trying to get it to work

@FixedUntilBroken

4 жыл бұрын

You will have to give more details I've had zero issues.

@thegxpguy

4 жыл бұрын

Fixed Until Broken I went back and done some more stuff to my ecm. I now have fuel and ignition, it’s booming and popping however still not starting. I can now hear the fuel pump being commanding to run by the ecm for two seconds key on, then off then runs again when cranking. Seems like after about 7 months messing with this all I needed was to vent a little pre pubescent like discomfort on youtube. Finally feel like I’m getting somewhere

@FixedUntilBroken

4 жыл бұрын

Im glad getting your frustration out helped you focus. These tools are pretty solid just doesn't hold you hand like some of the more main stream stuff.