Nice video, waiting mine to arrive in few days. I Impressive machine, runs extremely quiet compared to original. I don't miss the Musical steppers, they were cute at first

@windsorwoodcraft

8 ай бұрын

But that stepper motor music can be so soothing as you watch the machine move around. Lol

Nice video. It looks like an impressive machine. I have been using a MillRight Carve King (the original wood version), which is about the same size, about four (4) years now, without any problems. I am looking to expand my business and need another machine, so, I thought I would give this one a try and see how it compares to the MillRight Carve King. I 'pushed the button' the other day, Friday - Sept 16th, and ordered it.

@windsorwoodcraft

8 ай бұрын

Cool, thanks. It is a really nice machine. Ive used it to cut a lot of differnt materials so far and I haven't had any issues.

I got the v1 just a few months too early. I would have loved the v2, though I feel linear rails would be easier than the eccentric nuts

@windsorwoodcraft

8 ай бұрын

I agree, linear rails would be better but also push the price up a few hundred dollars. But I've never had any issues with this machine or the original 4030 version that I had in the past.

Very nice, agree they should have an option to upgrade to rails I would gladly pay few hundred more for rails

So before starting a job. 1. You home it. 2. Set probe and zero it . ? 3. Bring to corner of board zero that out and set start piont . And click start /send job ???

@windsorwoodcraft

4 ай бұрын

Correct. Those are the basic steps to start, assuming that you have your job set up correctly to match your starting and zero points in whatever software you are using, like Easel, Carveco etc.

@JanetDiaz6152

4 ай бұрын

@@windsorwoodcraft ohhh that's probably whats wrong. my job startup point when i use Vcarve pro.

Do you know if its compatible with the 4th axis or the laser rotary?

@windsorwoodcraft

5 ай бұрын

I think it is compatible with the laser, but not sure about the rotary or 4th axis.

@user-iw7iq6kd3n

5 ай бұрын

Ok thanks for the info.

Do you have a video on how to tram this machine? I own this machine, and I am ready to make my first cuts, but I am having an issue tramming it. Any assistance would be helpful, or if you could point me in the right direction, I would appreciate that a lot.

@windsorwoodcraft

6 ай бұрын

I don't have a video on tramming the machine, but there are some other channels that do. It's not hard to do, and honestly, I don't know that it's necessary right out of the box unless you intend to do fine machining where specific tolerances are required. I have not trammed mine since I got it, and I haven't noticed it being out of alignment with the projects that I have completed so far.

@josephlongo3991

6 ай бұрын

@@windsorwoodcraft I replaced the stock spindle with a Makita RT0701C router and I wanted to tram it to ensure it was as level/perpendicular as possible, before I make any cuts.

Bonjour ravi de votre vidéo j'ai appris comment régler la broche, j'ai reçu la mienne le 06/01/2024 très content mais de courte durée hélas j'ai le moteur Y1 ne fonctionne pas 😩😩 j'attend une réponse de SainSmart.

@windsorwoodcraft

5 ай бұрын

Thanks. Sorry to hear that you are having problems with your machine. Sainsmart is usually very responsive when customers are having issues. Hope you get it fixed soon.

Are you going to add a spoilboard?

@windsorwoodcraft

11 ай бұрын

I will be adding a spoil board soon.

@jongrace9133

11 ай бұрын

@@windsorwoodcraft I'm working on a plan right now with Vcarve. Willing to share the plan if you would like.

@windsorwoodcraft

11 ай бұрын

That sounds good. Thanks.

@peteredwards2371

11 ай бұрын

Hi, just received my V2 and was wondering about a spoil-board. Would you share your idea with me please ?

@jongrace9133

11 ай бұрын

@@peteredwards2371 Sure, working on it now.