We rented an apartment in Vienna and it had three of these 'hidden' drawers. We were there a year before we discovered them! 🤣. Love your channel and just subscribed. Always wished I'd trained as a joiner/carpenter - but just dabble now retired.

@BradshawJoinery

2 жыл бұрын

Haha brilliant! That was a nice surprise when you did then!?

Exquisitely satisfying!! Top job. And always informative:-))

@BradshawJoinery

2 жыл бұрын

Thanks Again! :) Happy New Year

Another stunning piece of work.

@BradshawJoinery

2 жыл бұрын

Again, thankyou Paul!

Great work again, Ollie

@BradshawJoinery

2 жыл бұрын

Cheers Dave :)

Very nicely executed.

@BradshawJoinery

2 жыл бұрын

Thankyou!

That is a great little addition and the editing of the vid is fantastic 👌

@BradshawJoinery

2 жыл бұрын

Thankyou, we knuckled down on the edit for this one and plan to do the same in the future! Great that it was noticed.

Beautiful job

@BradshawJoinery

2 жыл бұрын

Thanks again mate 👍👍

Enjoyed watching. Are these a new idea I've never seen them before. I like the added springs you mentioned last. It's very well built it'll outlast the kitchen. Tony

@BradshawJoinery

2 жыл бұрын

Cheers Tony, fairly new! Great idea if you ask me!!!

Neat work as usual,keep them coming. Oh,and a healthy new year too.😆

@BradshawJoinery

2 жыл бұрын

Thankyou for that! Good health to you also

Hi Oliver, outstanding thought and design! hope you're keeping well

@BradshawJoinery

2 жыл бұрын

Cheers Nigel! Yes good thankyou, Hope all is well with you!

Genius!

@BradshawJoinery

2 жыл бұрын

Why thanks, Who's this? 🤣

Very nice and creative, good idea my friend

@BradshawJoinery

2 жыл бұрын

Thankyou 🙌🙌

Very neat!

@BradshawJoinery

2 жыл бұрын

Thanks Nigel

Very cool👍

@BradshawJoinery

2 жыл бұрын

Cheers Adam :)

That is very neat

@BradshawJoinery

2 жыл бұрын

Cheers Doug

This stuff is so inventive 👌🏼

@BradshawJoinery

Жыл бұрын

Its a great idea isn't it!

@christinagracewhite

Жыл бұрын

@@BradshawJoinery It’s very cool 👌🏼

Class Nice work

@BradshawJoinery

2 жыл бұрын

Cheers lester

I hadn’t thought of that. A modification of that will make an excellent retractable front step up in to my outside shed which is built on 18” stilts or stumps. It will be handy because I can sweep sawdust etc straight out the front door into the bin, which I couldn’t do if I put s permanent step there. Thanks.

@BradshawJoinery

2 жыл бұрын

Awesome to be inspiring ideas!! I would perhaps use a normal drawer runner in that scenario and have a stop point at which you lift/sit the step on to locate. that way there is no chance of the step retracting while your inside.

V v nice job

@BradshawJoinery

2 жыл бұрын

Thankyou!🙌

Great idea and nicely filmed too. I am almost a foot taller (30cm) than my wife, so something like this in front of the kitchen sink would be fantastic!

@BradshawJoinery

2 жыл бұрын

thanks mate! Hope your well and have a good 2022! They are a great idea, probably works out quite expensive but im sure you could muster your own version up!!

@DovetailTimberworks

2 жыл бұрын

@@BradshawJoinery Was thinking the same thing! Happy new year.

Vacuum pack clamp is genius!

@BradshawJoinery

2 жыл бұрын

Its a great tool, although im struggling with some curved work at the minute and i wasnt calling it a great tool then haha!!!!

I wish we could’ve seen the install and I apologize if I missed it, but what is a kitchen plinth step? Brilliant job with all the bells and whistles, it’s gorgeous!

@BradshawJoinery

2 жыл бұрын

Thankyou, a plinth is the kick board under your kitchen cabinets. this is designed so you cut a section of kickboard and then attach to either a drawer or this step for extra storage or reach for shorterpeople/taller kitchens

👍

Great work .🎯🎯🎯 👍👍👍 I just made the draw box out of 18mm birch ply put pads on the front underneath and had a sliding step inside the draw like a tray as the step only needs to be about half the drawer depth, with a hand hole to remove if nessesary! Adjusted just right so the pads take up the 1/32" movement in the draw slide (60kg side mounts so not a stylish ) it's in the utility room so all good. New kitchen is WIP, face frame so not really enough depth to make plinth drawers much use.

@BradshawJoinery

2 жыл бұрын

Thattl work! The undermount runners would do the same tbh and flex enough to hit the floor.

@cliveclapham6451

2 жыл бұрын

@@BradshawJoinery yes but you loose too much depth in a kitchen plinth. Although your drawer/step was quite deep. Dad made in plinth drawers way way back in the mid sixties, think he was ahead of the curve on that one, with wooden runners. The units in the basement now, 🤔 might be time to repurpose it into a workbench or something.

Loving your videos after being recommend from Keith brown. I wish you did more voice over rather than text. Good work, thank you

@BradshawJoinery

2 жыл бұрын

Cheers Lewis, next one is voiced, it just depends on the project and what I've got on as to wether I can talk through it or not

NOOICE!

@BradshawJoinery

2 жыл бұрын

Thanks Man

The accuracy of your work is unbelievable 👏 its as tight as mechanical engineering standards.

@BradshawJoinery

2 жыл бұрын

Cheers Dan that's some compliment!!

Now then Oliver, may I ask what’s the details of your vacuum bag set up you’ve got there and where did you get it from? The valves on that look proper solid compared to some of the ones I’ve seen before 👍

Is that lovely workshop and machines from your you tube channel ?

@BradshawJoinery

2 жыл бұрын

Yes, added a couple of bits since I did the workshop tour 👍

@patbassman8251

2 жыл бұрын

@@BradshawJoinery Cool so its worth getting a You tube channel together.

@BradshawJoinery

2 жыл бұрын

Sorry Pat, I misunderstood your question, no the revenue from KZread hasn't paid for the workshop! 🤣 Far from it! Blood sweat and sacrifice has paid for it 😄

@patbassman8251

2 жыл бұрын

@@BradshawJoinery Well you must of worked hard for those machines ,well done.

Amazing. What is the material that's sitting on the bottom of the drawer or is that part of the MFC board?

@BradshawJoinery

2 жыл бұрын

Cheers, search fibre non slip matting

What’s the clear adhesive you use in the caulk gun? I saw you use it on butcher block project also. Is it food safe? Very handy doing large jobs with caulk gun.

@BradshawJoinery

2 жыл бұрын

I wouldn't worry about food safe with adhesive, on e it's set it doesn't release any chemicals etc. The glue is PU glue I use various brands but currently rank the wood Weld from construction chemicals the best

Neat idea. Please put the thing you're building at the beginning of the video. I'm not interested in seeing how it was built if I don't even know what "it" is

@BradshawJoinery

2 жыл бұрын

Duly Noted! 👍👍

Do you show how this fits under cabinet or ARE the cabinets special made

@BradshawJoinery

2 жыл бұрын

It will fit under a normal cabinet, if you make the box so it slides in between the legs of the cabinet then cut the plinth and use that as the drawer front. Obviously check for services under the cabinets

Have you a link to the soft close draw/step mechanisms? Who supplies it? Thanks

@BradshawJoinery

2 жыл бұрын

Hi Jason, I bought from LDL online for the step part search Blum space step. You'll need a drawer of appropriate length (50mm longer I think) with tipon mechanism to have push to open. I used a legrabox ordered to size again from LDL .

Do you have a picture/video of it in situ?

@BradshawJoinery

2 жыл бұрын

I will do a walk around the finished kitchen in February

@jamescarroll4728

2 жыл бұрын

@@BradshawJoinery look forward to it, great build!

how tall is the cabinet? 410mm?

@BradshawJoinery

Жыл бұрын

Ouph i have no idea, Wasnt that high, about 210 from memory

Gonna need to see some Mensa scores or those claims are out.

@BradshawJoinery

2 жыл бұрын

lol it is a genius invention by Blum

Looks like a great place to hide a gun.

@BradshawJoinery

2 жыл бұрын

Haha!