Έγιναν σαν καινούργια! Ευχαριστώ πολύ για την βοήθεια.

Lol, amazing! At the car detailing shop we used citrus cleaners and this brings a whole new level to what that means and probabaly smells better than store bought cleaners!

Not only does it look great, but I bet it smells good too!

גאוני עד שלב הלימון ! מספיק שטיפה אחת תיגע במתכת , והחלודה תרוץ על כל הרכב !

The last mixture bit amazed me.

Thanks for this helped my headlights massively 😁

@MrMigido

Жыл бұрын

Post a vid. Show us.

@tytassell9294

Жыл бұрын

Glad your headlights are happy

@IamAli89

Жыл бұрын

What can we use instead of Sodium Bicarbonate? I don't know what that SB is and where I get it?

A good cutting compound and my DA polisher along with a 4-inch pad and done, except they don't have that lemony smell.

헤드라이트가 저렇게 뿌애질정도면 몇년을 타야 저렇게 되나요? 난 오년마다 차바꾸는데 일단 5년까지도 깨끗하던데

very cool the results are so clear and clean

@gamakapas3379

Жыл бұрын

Use heating pistol

This is a master chef work :)

Al final no es por el limón es por la lija

Out of sight! Organic headlights. So tasty and healthy :-)

What????? Amaizing..i will do that..i got some spray from store and i expended 20 on this crap and just littlepart was no so bad but continued the light bad .thanks

I use marine rubbing compound with a variable speed buffer. Then I change the pad and finish off with car wax. Works like a charm. Takes 10 minutes top to do!

@annettezalar5848

Жыл бұрын

How long will the results last?

@HuckThis1971

Жыл бұрын

@@annettezalar5848 quite a while!

@frias2287

Жыл бұрын

👍👍👍

@MrJohnnyDistortion

Жыл бұрын

No clear coat sealer after?

@HuckThis1971

Жыл бұрын

@@MrJohnnyDistortion A good wax will last a long time. When you start to see it fade. Repeat process. Takes less time when headlight isn't too contaminated.

Creative video, thanks :)

Lemon is just an addition like many others, the rest is water and sandpaper which does the lion's work.

*Nickel ! Top ! 👍😁* *+1abo*

Sidenote" you should never use a " rough scouring pad" to clean headlights regardless of grit size. Silver polish works really good as well. Also, putting on a "headlight protective spray coating" helps reduce the damage caused by UV rays and "fogging". So will adding a small hole to bottom headlight assembly to allow water evaporate (condensation).

@pascalrenneson

Жыл бұрын

Les conseilleurs ne sont pas les payeurs, à bon entendeur, Salut ! ! !

@khalilthompson869

2 ай бұрын

I was thinking the same thing... Because I scraped mines with just that same dish washing sponge he used but the rough side, so I know this video is fake 😂😂

You can do the same thing without the lemon,just water and sandpaper and after finishing with two polishing paste,same effect

Buena idea 👍👍👍👍💯💯💯💯

Wow !! Long winded but whatever works for you, i use a forced dual action polishing machine with a cutting pad some heavy grade cutting compound buff until clear and add a ceramic coating to protect them from going back to frosted lol 😂

Will fade away again soon, due to uv. The best way is to sand with 2000 grit sanding paper and water, till the surface has an even milky look, and to cover it with some transparent clearcoat from s spraying can. No polishing needed, if sprayed correctly.

@abdulharuna8674

Жыл бұрын

Yes, this is correct. I've done it before and it is still looking ok, about one year now.

@DunOpondo

Жыл бұрын

Great idea, which spray paint brand would yo recommend or what should I look for incase I don't fint the one you recommend? Thanks

@dontknowler

Жыл бұрын

@@DunOpondo If you find smth which claims to be offering extra uv protection, or if you manage to get hold of a specialized clearcoat intended for plastic headlamps (such clearcoats exist) - that would be best. I had none of those at hand and used some cheap canned noname transparent clearcoat for car body painting repairs. In this scenario, bonding between the protective coat and the plastic is extra (and strongly) supported by plastic surface roughness, hence the clearcoat chemistry is virtually irrelevant. When spraying, apply the coating in very thin layers. Do not overspray: otherwise the applied too thick coat will generate bubbles / surface defects.

@DunOpondo

Жыл бұрын

@@dontknowler thanks alot 👍🏿

@brianavila6335

Жыл бұрын

this is the way 100%

Thanks for sharing 🙏🥰 Big like 👍👍👍

Wow. Fantastic.

Mother’s Aluminum Polish with a polisher will clean them without having to sand, about 2-3 minutes max each side

@mohammadrafie3467

Жыл бұрын

How?

@mygt8a4re

Жыл бұрын

@Mohammad Rafie use a drill attachment with a 3" polishing foam pad. Add the wheel polish and run the drill at around 2k rpms across the headlight. The wheel polish is more aggressive than car paint polishes and removes oxidation faster. It will yellow in months if you don't protect the bare plastic afterwards though. You can use a good quality clear coat. Or just repolish a few times/yr.

Тоже самое с палировочной пастой и водой

Wash well with soap and hot water, sand left to right then up and down with wet 1000 grit sandpaper use a spray bottle of water to keep it wet until you don't feel it cutting anymore. Wash it again warm water and soap and do the same thing with 2k sandpaper until it's not cutting. Wash it and go to 3k. Wash it and use your favorite buffing or polish compound and a microfiber rag to get a great finish.

@voorhees633

Жыл бұрын

Impressive!🤔

@JoeNathan42420

Жыл бұрын

@@voorhees633 lol thanks.

My daughter just bought a 10 dollar kit walmart and worked great

Thanks for the video. I just did mine on my CLK. I just used 1) wet sandpaper 1200 2) Halfords rubbing compound 3) T-Cut 4) Autoglym Fast Glass Took about an hour or so. Huge improvement and they are mostly now very clear and smooth. There is a touch of misting inside the headlamp covers here and there but not as much a I thought there was before I started.

@JoeNathan42420

Жыл бұрын

Try 1k, sanding in hex pattern (while keeping it wet with spray bottle) across the lens until you don't feel it cutting anymore. Then do the same with 2k an then 3k. After all that use your rubbing compound.

Wd 40 at the end, works great

Looks delicious 😋

Amazing video

Someone used Colgate toothpaste from the dollar store, polished with it, and then put a clear seal on them. That was over 6 years ago and they are still pretty good.

@vyperr3

Жыл бұрын

How please!

@scorporsupremacy7948

Жыл бұрын

I did the toothpaste challenge and it worked pretty well. It did not last for 6 years but, I got more than a year out of it. It’s important to apply a good wax after polishing and remember to apply more wax whenever it seems to be wearing off. I prefer this method to the others .

@MrJohnnyDistortion

Жыл бұрын

Someone?

@scorporsupremacy7948

Жыл бұрын

@@vyperr3 Just squeeze small amounts of toothpaste on the surface and rub in circular motions. Wipe and repeat until you get the desired appearance. Spray or wipe on wax and allow to dry. A drill brush attachment makes the job a whole lot easier.

@MikeM275

Жыл бұрын

ANY type of buffing compound will work! This is how body shops do it. Buff with compound, or toothpaste if you don't want to go to the store (compound is better), then they spray clear over them. Haven't done it to mine so don't know how much light is reduced like that. I just buy new Chinese aftermarket junk assemblies, no one knows...

Es imposibleeee es un trabajo !!! Para nadaaaaa ,,, perdida de tiempo ,!!!! Lijeee y clear !!! Eso es todooo

Awesome 😎

Man that's a new one at he end lol not falling for that 😂😂

This guy are you for real mate I thought he was gonna cook the head light 😅 I did mine with toothpaste and it was looking like brand new 😂

@tordj2508

Жыл бұрын

Was it Colgate mint toothpaste, or?

Wow, I'm trying this out. I used to think it's cleaned inside 🙈 but wondering how to open it

@JoeNathan42420

Жыл бұрын

No, the issue is on the outside. The sun beating down on them all day every day causes the plastic to oxidize and turn yellow. That's why when you sand them down an buff them they look new because you cut away the oxidized plastic. Here, the acid in the lemon is doing the work. Only not as well

@tuj1923

Жыл бұрын

@@JoeNathan42420 thanks for the explanation

Que bueno que mostró cómo sacarle el jugo al limon

@amadeodejesusaburto1878

2 жыл бұрын

Muy buena!!!!

The lemon done nothing it was the sandpaper that done the cleaning

I'm positive plane old tap water will work just as good as lemon juice.

Υπεροχο

How long lasting this shining?

Excellent

The result was outstanding bro, cheap and worthy.. please tell the alternative of Sodium Bicarbonate 😊

@superjeffstanton

Жыл бұрын

=Baking Soda

Nice 👍🏿

Maravilha, 1 semana depois, é ficando mais caro que os líquidos que fazem o mesmo em minutos !!!

@arsape2009

Жыл бұрын

jajaja só que eu pensei

Jenius banget boss

Wydawałoby się, że taki prosty zabieg nie zda egzaminu. A jednak proszę, jaki rewelacyjny efekt! Samodzielna praca jednak się opłaca. Natomiast przy poważniejszych usterkach to już wolę oddać lampy mojego auta do AutoGamma.

Good job

WD-40 Works like a miracle and then light coating of turtlewax for a gleaming polish. But i wouldnt mind trying out this, the results came out so well.

@69cinders

Жыл бұрын

It doesn’t last tho .. only temporary .. I tried

👏 Mantap 🤝🔥🔥🔥🔥

for how long it stays clean? Just like with WD40 it stays clean for a couple of weeks.

*Wonderfull*

There are many ways to de-fog plastic head lights but none last very long. Either part your car inside or in the shade or just replace the lenses.

@jblabs8651

Жыл бұрын

True u have to polished them very well after cleaning them

@vyperr3

Жыл бұрын

Lenses take years to fade naturally. Why do you say defogging doesn't last very long? Could one not seal it in epoxy for a long lasting treatment? Ty!

@MrJohnnyDistortion

Жыл бұрын

Oh, you're just a genius.

@max410

Жыл бұрын

If you don't have a garage to park your car and is exposed to weather conditions ,buying new lenses won't last too long, best thing to do is simply buy some mothers mag chrome polish and clean them regularly every 3 months, think of it as a preventive maintenance job. People that have a garage or that have a roof to protect the car from extreme weather such as high heat temperature in the summer and extreme cold weather in the winter plus the rain will affect the lenses of the headlights.

@MrJohnnyDistortion

Жыл бұрын

@@max410 How long will new lenses last? In Florida?

Saludos y muchas gracias por tu video, yo use lija de agua del 2000 hasta quitar lo quemado del plástico, después lija de agua del 3000 para eliminar los rayones propios del lijado anterior y al ultimo un trapo suave con polish para metales y quedaron como nuevos...

@franciscoromero6768

Жыл бұрын

Pero no en cosa de unos dos meses se vuelven opacos nuevamente?

@Ruben-bf5yk

Жыл бұрын

@@franciscoromero6768 si, pero si les das con esmalte de spray ya no

Nice!

Só o trabalho que dá, já é o suficiente para desistir. Sem contar com o custo.

Todo está claro pero el envase de vidrio con esa crema blanca no se que es, yo vivo en Venezuela, y estuve viendo la etiqueta, pero no he visto eso en mi país, si es posible puedes informar que es esa crema, o que otro producto sirve, que no sea ese. gracia

I've tried everything literally...the easiest and best is OFF mosquito repellent. I use the wipes it's much faster

I did it using chilli ketchup and mayonnaise made with extra virgin olive oil the result was very delicious. optional: you can add some garlic if you like it.

Where did you get that brand new headlight????

Makasih ilmunya

Tooth paste works as well

Sand lightly and buff. 5 minutes done deal. And you dont have to remove the headlight and bring it to the kitchen and make a lemonade and toothpaste. Fun to watch tho.... Thx

@bradykay9322

Жыл бұрын

Wet sand and clear coat..

@katmai7777

Жыл бұрын

@@bradykay9322 Clear coat will crack under the sun/wet conditions.

@bradykay9322

Жыл бұрын

@@katmai7777 sure it will. That's why you spray it on cars.

And for your rims ,you want to use plenty of relish.!!🤭

trllu banyak bahannya, klo saya simpel aja klo tuk mengkilatkan kaca motor atau mobil, cukup saya sediakan amplas di gosok lalu tuk menkilatkan yang kusam saya gunakan semprot clear motor.

There's this product from Mexico made of ground up bones and something else I remember them cleaning my gpas headlights. It was just wipe and all that yellowing came off.

New shimmer is a floor wax. No! New shimmer is a dessert topping. It’s both!

Gotta love movie magic

I’m thinking this process is longer than 10 minutes thanks

@dawidos117

Жыл бұрын

Definitely! 😂

Do this but without lemons lol, the sandpaper does the work and the water cleans the paper and removes the clearcoat and plastic. Wet sand polish and add protection or re-clear the headlight. I did mine and coated with a professional ceramic coating rated for 5 years and it lasted a little over a year and I have to do it again. If you use power tools it should take you about 10 minutes per light depending on condition, shape and access.

Wouldn't soft scrub work better?

Wouldn't water work in place of the lemon juice since your just using wet sand paper?

@mr.t8ylor795

Жыл бұрын

🤣 Facts

@jetsh1ftman746

Жыл бұрын

Yeah the lemon thing was pretty dumb

@danielreinhardt7684

Жыл бұрын

But it smells good :D

@mygt8a4re

Жыл бұрын

@@danielreinhardt7684 and the vitamin C will keep them healthy! XD

@gabeeaglesland1378

Жыл бұрын

Water doesn’t have the acidic enzyme that lemons do

-El limon un abrasivo sorprendente jajajaja.

Correct permanent way Wetsand with 400 grit paper till all the milk yellow is off lens then bring to local body shop for automotive clear coat they look new and don't ever fade again

Beleza gostei fou fazer no meu Você está de parabéns

1:19 I thought it was snail juice…. Lol 😂

Nice

А всего то надо было 20 грамм пасты))

Mejor compro pulimento, el limón esta bien caro :V 😄 ntc bro saludos

eso lo único de verdad que tiene son las lijas que usa da igual q sea con limón o sin limón lo importante son las lijas.agua jabón y lijas. El limón para que???

@hectorthepopcollector6768

Жыл бұрын

Para que huela mejor 🤣🤣🤣🤣🤣

I have doubts on this on so many levels.

Antigamente os faróis eram de vidros não ficavam amarelados. Hoje em dia são de plástico, uma porcaria!

Yo probe con cocacola dejas reposar 5 minutos y lavas con agua y quedan bien , sin tener que lijar

@SinNombre_XVE

Жыл бұрын

tengo que dejar remojando el faro? o solo se la aplico y ya?

@manelyeau9579

Жыл бұрын

@@SinNombre_XVE he probado con la edponja majica del mercadona y frotando con agua quedan impecables

@SinNombre_XVE

Жыл бұрын

@@manelyeau9579 donde la consigo? asi se llama? esponja magica?

@manelyeau9579

Жыл бұрын

@@SinNombre_XVE asi se llama en mercadona

@violettamartinez7940

Жыл бұрын

@@SinNombre_XVE mAGIC eRASER? POR mR. cLEAN?

What y’all didn’t see is when he put the new light on the table 🤣🤣🤣

@mohamedsaidy7885

9 ай бұрын

No its the same one see the crack on the headlight

@macarionava849

20 күн бұрын

EXACTLY

Może i to zadziała ale należy potem zabezpieczyć przed promieniami UV ten plastik bo za miesiąc będzie wyglądał tak samo 😉

@renatabitiva8252

Жыл бұрын

Bogda

Is lemon organic or regular :D

puedo usar limon mexicano o persa?

Как с помощью лимона и фары собрать 3.2 млн просмотров зевак)))

На сколько дней хватило?

Committee products a lot of effort you can go to anybody shop they can take their buffer in a little bit of compound they will buff all the oxidation off and then use a little bit of polish and polish it takes about the maximum five minutes per headlight but remember the plastic Has been damaged by UV and most likely it won’t last but another year and a half two years before it happens again a good way to preserve any headlight that’s plastic is have a clear plastic wrap put on it when it’s in good shape for those are the easiest way

Akan kucoba mudah mudahan berhasil trim's

Em um mês vai estar do mesmo jeito

Solo se necesita lija 2500 con agua el resultado es lo mismo

Masya Allah . 👍🙏👍

Try oil of Olay. It will give a better smooth surface. Noxema do the same thing

they become like new 🤗

Same results from McGuires headlight restorer .Bad thing is it needs to be applied every 2 weeks to a month or they get foggy again.

Wau super