General Motors / Detroit Diesel 6.2 Training

Автокөліктер мен көлік құралдары

1981 introduction VideoDisc for the GM / Detroit Diesel 6.2 V8 diesel motor. Includes an overview of the new engine, and some service procedures.
Sorry about the "fast play" at the end, this is due to problems with the disc.

Пікірлер: 538

  • @nickjohnsen444
    @nickjohnsen4445 жыл бұрын

    I remember my dad laying on his back in the driveway changing starters like he was changing oil on his. LOL.

  • @chasedirtbike4155

    @chasedirtbike4155

    4 жыл бұрын

    The oil lasted longer in the winter

  • @janetfromanotherplanet1301

    @janetfromanotherplanet1301

    3 жыл бұрын

    That’s me right about now

  • @parkerdariel2699

    @parkerdariel2699

    2 жыл бұрын

    You probably dont care but does anyone know a way to log back into an instagram account..? I was dumb lost the login password. I appreciate any help you can offer me.

  • @raidenjason5662

    @raidenjason5662

    2 жыл бұрын

    @Parker Dariel instablaster =)

  • @parkerdariel2699

    @parkerdariel2699

    2 жыл бұрын

    @Raiden Jason Thanks for your reply. I got to the site through google and I'm in the hacking process atm. I see it takes a while so I will reply here later when my account password hopefully is recovered.

  • @viggenwagen7033
    @viggenwagen70336 жыл бұрын

    That legendary engine have a great fuel economy in its class and there were very strong built, almost in every old Chevy Van for sale here in Finland have 400 -800k kilometers behind..

  • @Gieszkanne

    @Gieszkanne

    4 жыл бұрын

    How much liter on 100km?

  • @JackPecker911

    @JackPecker911

    4 жыл бұрын

    @@Gieszkanne 8-9 long distance highway driving, around 10-12 city driving

  • @Gieszkanne

    @Gieszkanne

    4 жыл бұрын

    @@JackPecker911 Thanks!

  • @chasedirtbike4155
    @chasedirtbike41557 жыл бұрын

    Thank God the national speed limit was 55 when this engine was made.

  • @FCFordLord

    @FCFordLord

    7 жыл бұрын

    Chase Dirtbike I have one of these in my K20, it has no issues going 70-75mph. Up around 80-85mph, wind becomes an issue.

  • @chasedirtbike4155

    @chasedirtbike4155

    7 жыл бұрын

    You are right. I loved the engine when I had it in my K20. I was in Florida, holding the pedal to the floor for a trip from Texas to Georgia. I was clocked by Florida highway patrol at 83 miles an hour. I looked amazingly at the officer and said it must have been a downhill run as I just leave the pedal on the floor. He laughed so hard, I thought he was going to wet his pants, and let me go without a ticket!

  • @kaulincurtis9665

    @kaulincurtis9665

    5 жыл бұрын

    @@chasedirtbike4155 top speed depends mostly on the gearing with these.

  • @SteveHolsten

    @SteveHolsten

    5 жыл бұрын

    I regularly drove my 6.2L Diesel pickup 65-70 mph without any issues!

  • @eliteprogaming4648

    @eliteprogaming4648

    4 жыл бұрын

    My truck is non turbo and will do over 90

  • @jordanparker882
    @jordanparker8826 жыл бұрын

    Thank you for posting this. I had an 82 k5 with a 6.2 in it and I never changed anything on it and drove it for years before getting married and selling it. I just got a 85k5 with a 6.2 in it again a few days ago and love it.

  • @nathaneberle5526
    @nathaneberle55266 жыл бұрын

    My 85 Chevy 4x4 had a 6.2 L Diesel I upgraded to the 6.5 L Diesel and bombed proofed the engine and it’s so much better I swear it runs for ever I’ve had the pickup for 10 years and I never have any problem since I do regular maintenance!!!

  • @sopastar

    @sopastar

    6 ай бұрын

    How did you bomb proof it?

  • @vwestlife
    @vwestlife8 жыл бұрын

    My LaserDisc player also played right through the menu frame sequence on my 1984 GM diesel disc, because most consumer-market players ignore the Automatic Picture Stop codes that these discs use.

  • @Cruelaid
    @Cruelaid5 жыл бұрын

    The comment about check your bolts for Metric... Too funny. We’re not sure what we used so you better check.. 😂😂😂

  • @dcrog69

    @dcrog69

    3 жыл бұрын

    I got a kick out of that too.

  • @dcrog69
    @dcrog693 жыл бұрын

    I love these old videos, really take me back.

  • @MrGGPRI
    @MrGGPRI8 жыл бұрын

    Have a '84 Van with this engine; installed a Banks Turbo setup and holly-cow !! whole new engine. GM's mistake was offering ANY diesel without a turbo; runs much cleaner and now fun to tow. The 700R4 trans is also a turkey behind a diesel; installed a NV3500HD 5-speed and problem solved.

  • @bryanmartinez6600

    @bryanmartinez6600

    8 жыл бұрын

    nice did u have to use an adapter kit for the transmission or modify the engine or transmission

  • @MrGGPRI

    @MrGGPRI

    8 жыл бұрын

    Bolted right up and the tower comes right up between the G20 Van floor braces; just cut one hole for the tower. Trans was the HD version from 1990's pickups ( I bought it new from GM) . Used a LUK flywheel with a LUK clutch kit which includes special clutch disk that eliminates two piece torsional type flywheels. I had the set balanced since I hate vibration. Have 40kmi on this setup.

  • @gregorymalchuk272

    @gregorymalchuk272

    5 жыл бұрын

    @@MrGGPRI Can you make a video of your setup? It sounds very interesting!

  • @KBS117

    @KBS117

    4 жыл бұрын

    Hahaha that new venture transmission, was the only thing junkier than that 6.2.. and I am a retired gm tech.. don't run that tranny in 5th gear going at high speed, for more then 20 miles.. pull over and let it idle and cool down ever 20 miles, or use 4rth gear.. tranny has a design flaw, and you will fry it, if you run it hard at freeway speeds in the overdrive gear.. (5th or 6th, whichever it has) .. overdrive spins the main rear power shaft, 30% faster than the front input shaft.. the bearing between those 2 shafts, runs dry of oil, and friction welds the 2 shafts together.. freeway speeds for long periods of time, in high gear, is what does this. And that turbo, on that 6.2, is dead.. unless it's the later design, with the 6.5 crank in it.. external oil seal on the rear of the crank, means, it's the better crank..oil seal in the rear main cap, means junk block and crank. Good luck, glad it's you and not me..

  • @jefferyepstein9210

    @jefferyepstein9210

    3 жыл бұрын

    @@KBS117 I have one with 380K no problem

  • @JimmyGelhaar
    @JimmyGelhaar8 жыл бұрын

    I've got one of these in my Chevy Blazer. We put a turbo on it and it runs great. Wish you had more of these videos! They're awesome!

  • @EXOVCDS
    @EXOVCDS8 жыл бұрын

    I keep picturing Johnny Carson when I hear this guy! :-)

  • @The_Ballo

    @The_Ballo

    8 жыл бұрын

    +Thomas EXOVCDS Little known fact: Johnny would also wear a tie when doing car maintenance

  • @EXOVCDS

    @EXOVCDS

    8 жыл бұрын

    +The Ball LOL.

  • @2014cwajts71

    @2014cwajts71

    4 жыл бұрын

    @@The_Ballo I wonder how many times he got it caught in the fan belt.

  • @louisedwards4023

    @louisedwards4023

    4 жыл бұрын

    And the engine is funny TOO😃

  • @PaulKUTM
    @PaulKUTM6 жыл бұрын

    Nice video, Jason. Thanks for posting!

  • @Blackneck1994
    @Blackneck19948 жыл бұрын

    Simplicity is bliss!

  • @1234597114
    @12345971143 жыл бұрын

    I had a pretty dim opinion of these engines until I got a truck with one in it. Completely changed my mind, boy was I wrong. I have an 84 C20 J code 3.73 gears and 4 speed SM465. Runs with traffic on the highway no problem. It’s a little soft when the revs are real low but perks right up once the tach starts moving. If you have healthy glow plug system and follow the start procedure on the sun visor it fires right up in the winter. As GM stated It was never meant to be a heavy pulling engine, just a diesel option for a gas v8 engine. I think of it as a 350 with the power range shifted towards the lower midrange. It’s a bit buzzy and that’s ok, it’s an old truck. For a diesel it’s super simple to work on. Replace the balancer when they get some age on them and don’t lug the engine around and you won’t have to worry about the crankshaft. Maintain your cooling system and don’t run them hot and no issues with cracking. Use the engine as it was intended, maintain it well ( the maintenance schedule advises to change the oil often, as little as 2500 miles depending on use and for good reason. The oil gets pretty sooty quick ) and it will give you decades of service. Mine was owned by a factory and had a Tommy Lift gate on the back. They used it since new to haul all kinds of stuff for years and years. It’s almost 40 years old and runs great.

  • @MMWA-DAVE
    @MMWA-DAVE8 жыл бұрын

    went a bit fast there at the end, couldn't write down my notes fast enough

  • @compu85

    @compu85

    8 жыл бұрын

    ya the disks get worse at the end. I guess they aren't sealed perfectly and air gets into the seam. most of the older disks have trouble past the 20 minute mark. There is a segment before this on the disk I edited out.

  • @jasonstuck7080
    @jasonstuck70808 жыл бұрын

    Beautifully simple

  • @VintageBenBenCoFilms
    @VintageBenBenCoFilms4 жыл бұрын

    I’ve got a 86’ Commercial Unit Cargo Vehicle (A Custom Deluxe for the military). Love that truck and engine. Gotta love this 80s awesomeness!

  • @dougc190
    @dougc1905 жыл бұрын

    If you had an EGR model you needed to find an air intake manifold off of a 1 ton truck. we had a bigger air opening if I remember right you got 10 extra horses just changing that part. then you turn the screw on the fuel pump and eighth of a turn, and it's a happy camper

  • @Hyprmtr
    @Hyprmtr4 жыл бұрын

    The last 30 seconds were great!!

  • @enumrob771
    @enumrob7717 жыл бұрын

    My 1984 K20 4x4 that I bought used 22 years ago now has 235,000 miles on it, I've pulled car trailers, horse trailers, hauled a 12.5' Camper etc and it still runs great. Only repairs was an injector pump and a fuel pump. gets 18-20 MPH empty. Now your not gonna break any speed records with it when hauling that kind of weight but I can't bitch one bit.

  • @841k9

    @841k9

    5 жыл бұрын

    My wife drove mine for a while when her vehicle was having issues. She called me one day on the way in to work and asked if something was wrong with the truck. It wouldn't accelerate and was surging. It was governing out at 73mph.

  • @enumrob

    @enumrob

    4 жыл бұрын

    @@841k9 HAHAH! Yes, I hate how my truck has NO overdrive and 4:10 gears. NOT a freeway rig for sure

  • @841k9

    @841k9

    4 жыл бұрын

    @@enumrob My m1009 still has the factory 3.08 gearing.

  • @mattlf9120

    @mattlf9120

    4 жыл бұрын

    That's weird, the Stanadyne/Roosa Master pumps don't surge when the hit the governor. It takes the fuel away very smoothly.

  • @841k9

    @841k9

    4 жыл бұрын

    @@mattlf9120 Old truck, no overdrive, th400 transmission and big tires. Lots of possible causes.

  • @EZNowTrucker
    @EZNowTrucker5 жыл бұрын

    A GM guy told me the 1989-1993 models were the better of these engines. Although most of the issues with cracked heads and blown head gaskets were from people over revving the engine when it was cold. I knew a guy who blew his cummins in his dodge because he lived about a 1/8 mile from the highway and never let his engine warm up and give it way to much fuel and blew the head gasket. Mind you it survived about 200000 miles and 6 or 7 cold winters and was never plugged in let alone warmed up or cooled down. If you operate the 6.2 GM/Detroit properly it can be a good engine.

  • @KBS117

    @KBS117

    4 жыл бұрын

    Huh? A guy told you a bunch of crap.. heads crack from heat, not cold.. these engines were converted gas engines. Not beefy enough for the pressures of an operating diesel.. as a gm tech, I have replaced hundreds of these things under warranty... Usually a snapped crank.. the 6.5 had a better crank and some of the last 6.2's got the better crank.. if it has an external seal on the rear crank, it's the beefier engine. The junk engine, has the seal, built into the rear main cap.. but the 6.5 has busted many a crank too.. I have ran both, and I praised God, when Ford, came out with the 6.9.. that was a great engine..

  • @zanefitch9343

    @zanefitch9343

    4 жыл бұрын

    KBS117 first part of that is wrong. I’ll have you know the 6.2 is not a converted gas engine. You’re thinking of the 5.7 Oldsmobile diesel.

  • @KBS117

    @KBS117

    4 жыл бұрын

    @@zanefitch9343 come-on buddy.. it's a light duty diesel..by converted gasoline, I meant, thin block, weak crank, bad heads and bolts.. the list is endless

  • @zanefitch9343

    @zanefitch9343

    4 жыл бұрын

    KBS117 oh ok yea you do have a point there. 135 hp is definitely light duty for sure haha

  • @detroitdiesel-vu3ig

    @detroitdiesel-vu3ig

    4 жыл бұрын

    @@KBS117 the 6.2/6.5 and the 5.7 Olds diesel are NOT converted gas motors. They do not share any components with existing gas motors. If you were actually a GM tech, you surely would be aware of this???

  • @maxhauler
    @maxhauler Жыл бұрын

    This video is a priceless gem on god-like level.

  • @The_Ballo
    @The_Ballo8 жыл бұрын

    The news has changed a lot in the years

  • @ronaldleoni238
    @ronaldleoni2384 жыл бұрын

    Mine was in a 1982 1/2 ton Rolls Canardly. It rolled down one hill and canhardly made it up the next!

  • @compu85
    @compu858 жыл бұрын

    Amazing this massive 6.2 makes similar power to the 2.0 common rail motor in our Passat!

  • @FCFordLord

    @FCFordLord

    8 жыл бұрын

    It is around 34 years old, afterall. Made to be a long lasting truck motor that got good mileage. I have one in my 3/4 ton 4x4 and get 19-20mpg.

  • @blakehooten8901

    @blakehooten8901

    8 жыл бұрын

    +FCFordLord Definitely i have 6.5 Turbo them figures were off back in the day and hook your passat to 15k pounds hahaha different kind of torque and power.

  • @19504x4

    @19504x4

    8 жыл бұрын

    +compu85 your vw won't still be running in 35 years

  • @compu85

    @compu85

    8 жыл бұрын

    +19504x4 No, probably not.

  • @francoisvda456

    @francoisvda456

    8 жыл бұрын

    it's all about torque

  • @1320fastback
    @1320fastback5 жыл бұрын

    Had one of these anchors in my CUCV and a 5.7 in the Oldsmobuick.

  • @reallyhappenings5597

    @reallyhappenings5597

    4 жыл бұрын

    how did you like owning the cucv?

  • @thespiritof76.
    @thespiritof76.5 жыл бұрын

    Thank you so much for sharing!

  • @thatbiguy1975
    @thatbiguy19757 жыл бұрын

    sounds like the micro machine commercial guy at the end- maybe I'm the only one old enough to remember that?

  • @abrahamcosworth2632
    @abrahamcosworth263210 ай бұрын

    This engine came out better than the Oldsmobile 5.7

  • @SKANK_HUNT49
    @SKANK_HUNT493 жыл бұрын

    I'm so excited I can't wait

  • @MrRuegi
    @MrRuegi2 жыл бұрын

    132.000 miles on it, Winnebago Brave and Runs great 💪

  • @MikeMikeSmith
    @MikeMikeSmith5 жыл бұрын

    My Dad had one... My first car was an 85, 3/4, 4x4, 6.2 Suburban (which was older than me.) I loved it!... And it got me in more trouble than any kid in a Z28!l

  • @pauljohansson7697
    @pauljohansson76975 жыл бұрын

    I just subscribed to your channel and hello from New Hampshire usa

  • @compu85

    @compu85

    5 жыл бұрын

    Thanks! I had a few more tapes to capture and upload, I hope to get to them soon!

  • @StuPedassol
    @StuPedassol3 ай бұрын

    I had one in an 84 Suburban. Over 30 mpg on I-80, at 75. Those of you whom suffered through slow acceleration must've missed this segments section on the turbo encabulator.

  • @PatrickBaptist
    @PatrickBaptist7 жыл бұрын

    GUYS THE LIFTERS HE IS SHOWING ARE THE SAME ONES USED IN THE 7.3 POWERSTROKES!

  • @compu85

    @compu85

    7 жыл бұрын

    I was amazed with Bill from PowerStrokeHelp pointed that out!

  • @PatrickBaptist

    @PatrickBaptist

    7 жыл бұрын

    You know that is where I heard it from HAHAHA. I had just got done picking up one of these lifters off the shop floor and then watched this right afterwards LOL.

  • @jeanmeslier9491
    @jeanmeslier94914 жыл бұрын

    I have two, bought new in 1987 and 1991. I installed Banks turbos. No engine problems at all. One has 230,000 miles, the other 138,000 I know a guy who drove a 1987 GMC 6.2, one million miles. He used two engines to do it. As someone noted, GM screwed up by ever selling these without a turbocharger. The first thing I did was put a 4 row radiator in the trucks. The factory two row tubes didn't cool the engine enough.

  • @jterry211
    @jterry2118 жыл бұрын

    Wish mine looked that good lol

  • @silverioarroyo5968
    @silverioarroyo59686 жыл бұрын

    This is so soothingly 80s. We need to bring back the na Detroit diesel to Chevy. I would buy one.

  • @tuckercole1531

    @tuckercole1531

    3 жыл бұрын

    I’d rather a straight axle first

  • @TickledFunnyBone
    @TickledFunnyBone3 жыл бұрын

    from what i understand that some 70's heavy duty Diesel applications such as this were used for alcohol drag racing. it is said that the motor was "virtually indestructible".

  • @liamthemarchingbandguy4063
    @liamthemarchingbandguy4063 Жыл бұрын

    The guy didn’t point out that this engine was also in some of the full sized vans. This Diesel engine was by far one of my favorite diesels even though it was discontinued before I was born.

  • @dyer2cycle
    @dyer2cycle2 жыл бұрын

    ..What he was really trying to impress, at the beginning of the video, without actually saying it, was that this engine isn't related to the 350 Olds diesel engine, which GM was hoping to wash their hands of at this point...

  • @andyharman3022
    @andyharman30224 жыл бұрын

    It's funny how many times he said "This engine has nothing in common with the other diesel made by GM." Even though he wouldn't mention Oldsmobile by name. And "this is an entirely new engine, it is not a beefed-up version of a gasoline engine." I wonder how much amusement the engineers at Chevrolet got over the Oldsmobile diesel problems. Seems like there was some inter-divisional rivalry happening here. This was long before GM consolidated all the engineering into GM Powertrain.

  • @mattlf9120

    @mattlf9120

    4 жыл бұрын

    Just stating for the record, the Oldsmobile 350 diesel block is not the same as the gas block. Very few parts interchange between the two. And the DX blocks were very reliable, more so than the 6.2 and the 6.2 wasn't too bad.

  • @andyharman3022

    @andyharman3022

    4 жыл бұрын

    @@mattlf9120 The Olds diesel block was quite strong. Andy Mannarino campaigned a pro stock drag car using the diesel block. He actually had to lighten it. The injection pump was the biggest problem with the Olds diesel. And there were many failures due to water in the fuel that could have been avoided if GM hadn't cheaped out by not putting a water separator on the engine.

  • @mattlf9120

    @mattlf9120

    4 жыл бұрын

    @@andyharman3022 your right and diesel fuel has come a long way since then too. My Ninety-Eight diesel doesn't have a separator on it and I haven't had any water for 10+ years. I wonder if modern pumps at the station have water separators built in?

  • @melrose9252

    @melrose9252

    Жыл бұрын

    @@mattlf9120< GM used the gas block, that’s the problem.

  • @michaelteeple8704
    @michaelteeple87046 жыл бұрын

    Those that dont know much compare this to current designs and put GM down. I drove one tons when they pulled to about 2000 rpm then fell on thier face, ford included. This is why they force induce most now. It was plenty good if you needed a diesel in the old days. Hope you kids can make somthing in your life worth a dam in between blaming others and playing x box.

  • @noscopesallowed8128

    @noscopesallowed8128

    5 жыл бұрын

    Gotta add that obligatory blame the kids statement even if it doesn't make sense! Well played sir. Also, while I love Detroit Diesels, my 4.9L inline 6 gas engine produces more horsepower and torque than this engine does. And my engine is in no way powerful.

  • @superduty4556

    @superduty4556

    5 жыл бұрын

    @@noscopesallowed8128 300 for life

  • @nodak81

    @nodak81

    5 жыл бұрын

    Interesting comment coming from an old guy blaming "kids" and playing around on KZread.

  • @841k9

    @841k9

    5 жыл бұрын

    ​@@superduty4556 I've owned both and loved both. The 300/4.9 was a guzzler in comparison to the 379/6.2. They both ran out of steam on the freeway, but always made it home with the load. I sold the 4.9 but still have the 6.2. Both trucks shared one problem- rust. Other than that they both did their jobs without complaints and with few failures.

  • @kaulincurtis9665

    @kaulincurtis9665

    5 жыл бұрын

    A good engine. GM was the first company putting diesels in pickups, a fact many people seem to forget when they bash on this engine.

  • @jamazonnewyork3221
    @jamazonnewyork3221 Жыл бұрын

    the most reliable, simple, and fuel efficient v8 ever made

  • @TickledFunnyBone
    @TickledFunnyBone3 жыл бұрын

    the end of that video reminds me of the 80's movie Max Headroom.

  • @edwardpate6128
    @edwardpate61284 жыл бұрын

    The Ricardo Comet 5!

  • @Adamz678
    @Adamz6785 жыл бұрын

    If they just downsized a 8v92 or I guess make this into a 2 stroke with a blower and turbo, things would have gotten interesting.

  • @detroitdiesel-vu3ig

    @detroitdiesel-vu3ig

    4 жыл бұрын

    They wanted to stay away from Detroit Diesel's willingness to incorporate unit injectors as they are more prone to runaways

  • @kadenwatt2033

    @kadenwatt2033

    3 жыл бұрын

    @@detroitdiesel-vu3ig plus the 2 strokes would never have been to meet emissions

  • @bnkwupt

    @bnkwupt

    Жыл бұрын

    There are two downsized 8v92s. One is the 8v71 and the other is the 8v53. 👍

  • @ohiopower
    @ohiopower7 жыл бұрын

    Haha. That little lifter is in everything. From the 6.5 gm to the 6.4 powerstroke.

  • @amosikner1297
    @amosikner12977 жыл бұрын

    So, what about covering the delivery lines from the injection pump to the injectors? are we safe to just leave them open?

  • @BonhommeRichard91
    @BonhommeRichard916 жыл бұрын

    Nice suit

  • @robertpayne2717
    @robertpayne27174 жыл бұрын

    My 83 Chevy C-10 pickup was not a problem the turbo 350 transmission was..

  • @cometboston737
    @cometboston7374 жыл бұрын

    Thankyou

  • @CngBng
    @CngBng2 жыл бұрын

    I wish I had this handbook

  • @agentp6621
    @agentp66217 ай бұрын

    Being an army helicopter mechanic. I’m accustomed to standard fasteners. I hate how they mix and match metric and standard. I would hope I could swap out the metric with standard fasteners if possible.

  • @jeffgarrett2114
    @jeffgarrett21145 жыл бұрын

    Cleanliness is important when working on a diesel engine 🤣🤣🤣 the mechanics at the shop I work at are covered in grease and oil

  • @codymoncrief8478
    @codymoncrief84784 жыл бұрын

    Was debating a 6.2 swap or a 6.5 swap. I think I have now decided

  • @detroitdiesel-vu3ig

    @detroitdiesel-vu3ig

    4 жыл бұрын

    I have a nice 1987 V1500 Suburban with a TBI 350 that just won't hold coolant but other than that, a very nice and clean survivor I also have a tired old 1983 K2500 6.2 diesel powered truck. She's rusty and tired but the 6.2 is healthy so I think I'm gonna go ahead and sacrifice my 1983 for the greater good of the 1987

  • @blown572hemi
    @blown572hemi4 жыл бұрын

    Total boat anchor but everything can be modified. Love retro stuff though

  • @erichaley6776
    @erichaley67763 жыл бұрын

    My Army Reserve unit had a bunch of humvees and blazers with this gutless wonder..Detroit Diesel

  • @oldbuzzard76
    @oldbuzzard76 Жыл бұрын

    0-60 in 6 days to week ! AH , the good old days .

  • @davidsiler5505
    @davidsiler55054 жыл бұрын

    The video was a bit worn out especially near the end but still worth watching.

  • @compu85

    @compu85

    4 жыл бұрын

    Ya, the LaserDisc is failing. :(

  • @chrismcadooak47
    @chrismcadooak476 жыл бұрын

    I have a 1990 model with 400'000 on it not much power but a very good engine. Gona overhaul it in a few weeks found a turbo from a 1999 6.5 that should wake it up.

  • @KBS117

    @KBS117

    4 жыл бұрын

    That engine can't stand the turbo.. you will snap the crank...

  • @detroitdiesel-vu3ig

    @detroitdiesel-vu3ig

    4 жыл бұрын

    @@KBS117 again, I can see you have no real experience with these motors. That crank will withstand forced induction. If he is gonna be that worried about the crank, you can purchase a Fluidamper harmonic balancer that will completely resolve any crank issue

  • @aaronhumphrey2009

    @aaronhumphrey2009

    3 жыл бұрын

    Add an intercooler..then you put in an adjustable mechanical waste gate set for 10-15 psi, propane/ alcohol injection at high boost..

  • @jeffgarrett2114
    @jeffgarrett21145 жыл бұрын

    Drop bolts inside engine when removing them

  • @coburnlowman
    @coburnlowman7 жыл бұрын

    I posted on another video. When these first came out they were completely useless dogs. Non of the upgrades had came out and after the owner had replaced several head gaskets and its performance wouldn't let you pass a bicycle they would go find a junk yard gasser and have my dad swap em out. He had these things piled everywhere. Most were hauled off as scrap metal. I have several Silverado 4x4's with bad engines that I'd luv to have 6.2's in with all the upgrades to make them perfect engine. The only truth when they came out was that they got really great fuel economy , plus diesel at the time cost just slightly more than a bucket of mud. We ran the old Fords with the 6.9's and it seemed we were driving for free with the low price of diesel. The 6.9's didn't get the mileage that a 6.2 would but it still was a great day to own a diesel engine. Now I run around to gather old engine oil to centrifuge and run that because I can't afford the"real" diesel. The 6.2's like motor oil fuel as well.

  • @MrTheHillfolk

    @MrTheHillfolk

    6 жыл бұрын

    Phil Lowman I run like 25% new engine oil and other new oily crap thru my vw diesel, it loves it.

  • @aaronhumphrey2009

    @aaronhumphrey2009

    3 жыл бұрын

    @@MrTheHillfolk there's dual tank kits for switching over to fry oil/ whatever for VWs..a tank heater helps liquify cold fuel..

  • @Wingnut_Stickman
    @Wingnut_Stickman3 жыл бұрын

    The bore is larger than the stroke. I guess this qualifies as a sleep aid. All this bore....

  • @shawnlawrence4840
    @shawnlawrence48402 жыл бұрын

    Where is the oil pressure switch located

  • @ellenorbjornsdottir1166
    @ellenorbjornsdottir11666 жыл бұрын

    0:00 Datablast!

  • @andresescobar3256
    @andresescobar32566 жыл бұрын

    OMG IS THIS THE TURBO ENCABULATOR GUY??? BOSS LOL

  • @juanfo7307
    @juanfo73078 жыл бұрын

    I didn't mark push rods when I removed them. How do I know which side is up?

  • @9102jack

    @9102jack

    8 жыл бұрын

    +juan fo you wont know lol only replacement ones are marked.

  • @juanfo7307

    @juanfo7307

    8 жыл бұрын

    I looked and they have a different color on each end like one is gray and the other is a yellowish tone but which one is which?

  • @aaronhumphrey2009

    @aaronhumphrey2009

    3 жыл бұрын

    Head side runs hotter..see which end fits perfectly into the lifter before installation..

  • @stevemino142
    @stevemino1426 ай бұрын

    The 6.2 litre Detroit diesel was a good motor it was Gm fist full diesel engine which was different than the 5.7 litre Oldsmobile diesel which later evolved into the 6.5 and 6.5 turbo power in the early 90s people say the 6.5 was underpowered but then again parts were cheap and the 6.5 was fairly economical at the time and probably still is today

  • @jeffgarrett2114
    @jeffgarrett21145 жыл бұрын

    Oh no the VCR ate the tape

  • @louisedwards4023
    @louisedwards40234 жыл бұрын

    I've worked on the Automatic transmission in this senc it's insepction , the 700R4 WAS A BUGGER BEAR😭

  • @victorvictor8587
    @victorvictor85875 жыл бұрын

    This was Recorded in Beta .

  • @compu85

    @compu85

    5 жыл бұрын

    I don't know what the cameras used, but I captured this from a (degraded) laserdisc.

  • @bduff007
    @bduff0078 жыл бұрын

    Sounds like the entabulator vid

  • @9102jack

    @9102jack

    8 жыл бұрын

    +bduff007 retro encabulator*

  • @mcqueenfanman
    @mcqueenfanman7 жыл бұрын

    1:44 so your not talking about the olds 350 diesels? Yeah, they beefed up a gas engine for diesel duty.

  • @Bloodcurling

    @Bloodcurling

    5 жыл бұрын

    false

  • @adambryant2434

    @adambryant2434

    5 жыл бұрын

    No not exactly

  • @misters2837

    @misters2837

    5 жыл бұрын

    100% True... My Family worked at Oldsmobile Powertrain Division. It wasn't the only time Gas/Diesels came from the same block and had endurance issues... GMC Toro-Flow Diesels were built on V6 Gas Blocks... Go back to playing PlayStation children.

  • @aaronhumphrey2009

    @aaronhumphrey2009

    3 жыл бұрын

    Worst diesels ever made in America. Boatanchors.

  • @renatowormsbaldi8291
    @renatowormsbaldi82918 жыл бұрын

    Thx a lot for this informations. Do you have another training videos for this engine?

  • @compu85

    @compu85

    8 жыл бұрын

    No other diesel discs yet. I have some other gm discs that won't play and some Ford VHS tapes to import still.

  • @Mossy500A
    @Mossy500A5 жыл бұрын

    That must be the strongest engine mount in the world, lol.

  • @effend446
    @effend446 Жыл бұрын

    Might have been slow as a turtle, but the 6.2 Detroit Diesel was built like a tank. Put a Banks turbocharger on it and it'll definitely give it a much needed boost.

  • @Slim_Slid

    @Slim_Slid

    Жыл бұрын

    It also depends on the gearing. In the military,the M1008-M1031 CUCV's came from General Motors with 4:56 gears and wouldn't even go above a digit from 60 MPH on flat roads. But the M1009's had 3:08 gears and did 70-80 MPH with no issue. The Banks kit added 60 HP/115 TQ when installed and equipped. The military all ordered theirs as J Code engines which meant deleted EGR and higher power ratings,but were naturally aspirated. For awhile now I've been really wanting to add a Banks to my M1009 and see what it can do.

  • @chrishultgren777

    @chrishultgren777

    Жыл бұрын

    Garages literally made millions replacing broken down 6.2l with gas 350s.

  • @giberish9
    @giberish97 жыл бұрын

    vcr break near the end?

  • @brian6265

    @brian6265

    7 жыл бұрын

    laserdisc

  • @RockymountainRobert
    @RockymountainRobert Жыл бұрын

    I had one of those in a suburban, it ran like a beast, turbo charged would be better.

  • @randymagnum143
    @randymagnum1436 жыл бұрын

    I have one of these in my boat. Where should I attach the anchor chain?

  • @nou8257

    @nou8257

    5 жыл бұрын

    The crankshaft

  • @vuelvoel2011

    @vuelvoel2011

    5 жыл бұрын

    to your balls

  • @bluecollartradesman715

    @bluecollartradesman715

    2 жыл бұрын

    The 6.2 and 6.5 have a huge following in the marine industry. You can rev them to 3000 RPM and they sip fuel.

  • @Mercmad
    @Mercmad5 жыл бұрын

    It was a desperate move to mention it had nothing to do with the car engine based disasters of the 70's.

  • @kaulincurtis9665
    @kaulincurtis96655 жыл бұрын

    A damn good engine for the time

  • @louisedwards4023
    @louisedwards40234 жыл бұрын

    Back in the 30s Agin Hugh?

  • @leemesenhimer2072
    @leemesenhimer20727 жыл бұрын

    He said that you should always cap the fuel lines when you disconnect them from the fuel filter. But he did NOT do this in his demonstration. And he did not quote a service part number for the necessary line-caps.

  • @jonasgrumby1093
    @jonasgrumby10935 жыл бұрын

    Nothing is interchangeable Not even the fuel lift pump

  • @1903tx
    @1903tx8 жыл бұрын

    What format of disc is this from, LaserDisc?

  • @compu85

    @compu85

    8 жыл бұрын

    +1903tx Yes, it's an MCA DiscoVision disc, the name that preceded them being called LaserDiscs.

  • @j.m.5995
    @j.m.59954 жыл бұрын

    130 Net horsepower out of 6.2 Liters... WOW

  • @JBidensucks

    @JBidensucks

    4 жыл бұрын

    fuck the hp as it's a deisel especially. I'm a performance engine builder. when I heard 240 pou is of torque I almost spit my beer in my gf face. that's not even 1 lb/ci WTF ! ?

  • @Alehyn666
    @Alehyn6663 ай бұрын

    most 6.2/6.5 owners dont know shit about them think they're smart, those engines were SOOOO reliable with so little maintenance to none, fluid damper@front crank, smoky exhaust? tranny fluid pint in fuel tank ever 5k/KM(detergent in ATF cleans injector ports and low grade american diesel from ports,also might kill your shitty bosche DB2/DB4 if you over do it, just brake the checkvavle on the top of the injection pump,(its a glass ball 3mm by 3mm) then your set for life, also if you increase fuel pressure @checkvalve by couple PSI you'll gain tremedous horse power compared to its limp stockforms) injections precup will also serve a role in MPG vs POWER, depending on your build you might want to investigate into those, also if you do turbo them you gotta have an EGT gage, because otherwise you'll overload the poor pig and cook it dry, much love from canada quebec, where our 6.2 starts @ -40 celsius unplugged

  • @nealk6387
    @nealk63874 жыл бұрын

    No aftertreatment bullshit, I miss these days

  • @whitetrash1864
    @whitetrash18648 ай бұрын

    That disclaimer in the beginning about sharing components with gm gas engines we all know that engines hes referring to

  • @tombig4011
    @tombig40113 жыл бұрын

    He had to give the “this isn’t a converted 350 gas engine” disclaimer. Goes to show how garbage those were.

  • @tombig4011

    @tombig4011

    3 жыл бұрын

    super pickle they used the same architecture as the olds 5.7. The parts inside were different, the block was so close to the same they were able to use the same dies as the olds gas burner.

  • @the_burchfield1655
    @the_burchfield16557 жыл бұрын

    Back when auto makers took care of they're consumers

  • @melrose9252

    @melrose9252

    5 жыл бұрын

    The_Burchfield HaHa, you must not remember the junk they were putting out back then.

  • @KBS117

    @KBS117

    4 жыл бұрын

    Hahaha, you can't be serious? I was a tech for gm, when this junk was produced...junk

  • @enumrob

    @enumrob

    4 жыл бұрын

    Not really. When GM came out with the 5.7L diesel , it was a pricey option. After they blew up around 30,000 miles or so GM"s answer was to switch them back to a gas engine for thousands of dollars. So here you paid extra for the diesel and then GM had the balls to charge you full bore to install a gas engine back in. Class action lawsuit was filed.

  • @alexsmith42069
    @alexsmith420696 жыл бұрын

    Nothing is interchangeable? Not even the air cleaner? Dayum

  • @Tigerfire75
    @Tigerfire758 жыл бұрын

    They need to put a couple turbochargers on it to really give it some kick. Then you could tow just about anything and have the torque to really burn the tires at take off.

  • @ohiopower

    @ohiopower

    8 жыл бұрын

    +Tigerfire75 Probably pop the head gaskets like a cork.

  • @Tigerfire75

    @Tigerfire75

    8 жыл бұрын

    ohiopower Well get stronger bolts up there. I hear one of the problems with this engine was the fact most diesel fuel back then had water in it. I guess stations wanted to water it down to get more money for less. Water in the diesel engine is very bad I hear.

  • @justinstearns9723

    @justinstearns9723

    8 жыл бұрын

    The crankshaft would snap like a toothpick. They break cranks even with the Banks turbo kit that GM endorsed for them when they were new. And the Banks turbos only put out like 6psi of boost. They do give them a respectable increase of about 40hp however.

  • @Tigerfire75

    @Tigerfire75

    8 жыл бұрын

    Justin Stearns I say part of the problem was the poor quality of diesel fuel. Back when these engines were new I hear they had water in the fuel. That is deadly for diesels. Also GM may not of had a water seperator but not sure on that.

  • @nmdiesel89

    @nmdiesel89

    7 жыл бұрын

    no, they literally had toothpicks for a crank, the 6.2 and 6.5 are both notorious about snapping their cranks even when stock and they continue to do so to this day. Hell they had service bulletins stating how big of a crack their heads could have. Neither had anything to do with water in the fuel.

  • @chrisbutcher4497
    @chrisbutcher4497 Жыл бұрын

    Hi. Can you tell me where I can get parts for these engines in the UK. Thanks Chris.

  • @compu85

    @compu85

    Жыл бұрын

    Sorry, can't really help you there. Does RockAuto ship to the UK?

  • @chrisbutcher4497

    @chrisbutcher4497

    Жыл бұрын

    @@compu85 OK thanks anyway 👍

  • @fuckyomamafuckyosisterfuck6136
    @fuckyomamafuckyosisterfuck61364 жыл бұрын

    Metrics, Lmao, the death nail of GM. We can thank the French Canadians for that SNAFU

  • @iralosttwo5569
    @iralosttwo55693 жыл бұрын

    I had a 82 blazer with this motor. I swear it was snappier and had more snarl than the later 6.2's.

  • @jaga7484
    @jaga74846 жыл бұрын

    And then end of the video guy had a runaway speech))

  • @Bloodcurling
    @Bloodcurling5 жыл бұрын

    Non-ceremonious ending haha

  • @jamazonnewyork3221
    @jamazonnewyork3221 Жыл бұрын

    so rare

Келесі